Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
Osterman & Company Inc.
All Osterman & Company Inc.
Search products
Matching Product Categories
Plastics
Markets
Certifications & Compliance
Labeling Claims
Regional Availability
All Filters
25 Products found on Osterman & Company Inc.
Most Viewed
TDS
With TDS
Osterlene® LD200-SAHC
Polymer Name:
Low Density Polyethylene (LDPE)
Processing Methods:
Extrusion
Osterman & Company Inc. Osterlene® LD200-SAHC is designed for applications requiring clarity, strength and stiffness.LD200-SAHC exhibits good processability and clarity. Uses for this resin include, bags, film, packaging.LD200-SAHC meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.
Osterlene® LD025 (-B, -A, -SA)
Polymer Name:
Low Density Polyethylene (LDPE)
Processing Methods:
Extrusion
Osterman & Company Inc. Osterlene® LD025 (-B, -A, -SA) is designed for heavy duty film applications. Superior puncture resistance combined with excellent impact properties make this resin an ideal choice for bags used to package chemicals, agricultural and construction materials.LD025 has been designed for excellent processability, bubble stability and good heat sealing over a wide range of extrusion conditions. This resin is also well suited for shrink film applications.Osterlene LD025 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.
Osterlene® LLB200 (-B, -SA)
Polymer Name:
Linear Low Density Polyethylene (LLDPE)
Processing Methods:
Film Extrusion, Extrusion
Osterman & Company Inc. Osterlene® LLB200 (-B, -SA) features a low gel level and exhibits excellent toughness and strength when drawn down to thin gages in blown and cast film applications.Uses for LLB200 include, bags - heavy duty bags, industrial applications, packaging, cast, liners, stretch wrap and film.LLB200 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.
Osterlene® HM0595
Polymer Name:
High Density Polyethylene (HDPE)
Processing Methods:
Extrusion
Osterman & Company Inc. Osterlene® HM0595 is a high molecular weight high density copolymer that provides broad bimodal molecular weight distribution, high stiffness and good heat seal response and strength.Applications for Osterlene HM0595 include merchandise bags, grocery sacks, trash can liners, produce bags and roll stock.HM0595 meets the requirements of the Food and Drug Administration regulation 21 CFR 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food..." Specific limitations or conditions of use may apply. Contact your Osterman Sales Representative for more information.
Osterlene® LLB100C (-B, -SA)
Polymer Name:
Linear Low Density Polyethylene (LLDPE)
Processing Methods:
Extrusion, Coextrusion
Osterman & Company Inc. Osterlene® LLB100C (-B, -SA) is a general-purpose film grade linear low density polyethylene. This resin exhibits excellent toughness and strength when drawn down to thin gages.Suggested applications for LLB100C include blending resin applications, industrial packaging, co-extrusion, industrial liners and garment bags.LLB100C meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.
Osterlene® HB1049
Polymer Name:
Ultra High Molecular Weight Polyethylene (UHMWPE)
Processing Methods:
Extrusion, Blow Molding
Osterman & Company Inc. Osterlene® HB1049 is an extra high molecular weight hexene copolymer. It has good melt strength, good rigidity, excellent stress crack resistance and excellent impact strength even at low temperatures.HB1049 is excellent for large part molding applications.Recommended applications for HB1049 include blow molding large shipping containers, agricultural chemical tanks and gasoline tanks. Extruded applications would include pallets, cattle feeders, large formed parts and boats.Osterlene HB1049 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.
Osterlene® LD200 (-B, -SA)
Polymer Name:
Low Density Polyethylene (LDPE)
Processing Methods:
Extrusion
Osterman & Company Inc. Osterlene® LD200 (-B, -SA) is a of homopolymer resin for blown film. Applications include industrial liners and general packaging films.LD200 exhibits good processability and clarity.LD200 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.
Osterlene® LLH200-B
Polymer Name:
Linear Low Density Polyethylene (LLDPE)
Processing Methods:
Extrusion
Osterman & Company Inc. Osterlene® LLH200-B is a linear low density barefoot grade designed for use in the core layer of a multi-layer stretch film applications.LLH200-B meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.
Osterlene® PPC04-SHI
Polymer Name:
Polypropylene Impact Copolymer (ICP)
Processing Methods:
Extrusion, Thermoforming, Injection Molding
Osterman & Company Inc. Osterlene® PPC04-SHI is a high crystallinity, excellent stiffness, high impact copolymer resin designed for injection molding, extrusion and thermoforming applications.Uses for PPC04-SHI include; crates, consumer applications, industrial applications, pallets, tool and tote boxes and toys.
Osterlene® LLH100 (-A, -B, -SA)
Polymer Name:
Linear Low Density Polyethylene (LLDPE)
Processing Methods:
Extrusion
Osterman & Company Inc. Osterlene® LLH100 (-A, -B, -SA) is a linear low density polyethylene grade for applications that require high strength and toughness.Typical applications include heavy duty shipping sacks, trash can liners, commercial and industrial packaging, as well as food and consumer packaging. This resin offers enhanced film strength, drawdown, toughness and heat seal strength. In addition this resin has excellent low temperature resistance for applications such as stretch film and frozen food packaging.LLH100 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.
Osterlene® HM0550
Polymer Name:
High Density Polyethylene (HDPE)
Processing Methods:
Film Extrusion, Extrusion, Thermoforming
Osterman & Company Inc. Osterlene® HM0550 is a high molecular weight high density polyethylene (HMW-HDPE) for film extrusion and extruded sheet / thermoforming applications. It is a bi-modal resin designed for high impact strength and good processing characteristics. This resin is well balanced in overall physical properties and provides good stiffness for thin gage film and extruded sheet / thermoforming applications.Suggested applications for HM0550 include heavy duty bags, industrial liners, t-shirt bags and trash can liners.
EPIMAX® ABS-808E
Polymer Name:
Acrylonitrile Butadiene Styrene (ABS)
Processing Methods:
Extrusion
EPIMAX® ABS-808E by Osterman & Company Inc. is comprised of Acrylonitrile Butadiene Styrene. It is commonly used
Osterlene® HIPS2.63.6
Polymer Name:
High Impact Polystyrene (HIPS)
Processing Methods:
Thermoforming, Extrusion
HIPS2.63.6 is a super high impact polystyrene designed specifically for sheet extrusion and thermoforming.
Osterlene® LLM100
Polymer Name:
Metallocene Linear Low Density Polyethylene (mLLDPE)
Processing Methods:
Film Extrusion, Extrusion, Coextrusion
Additives Included:
Processing Aid
Osterman & Company Inc. Osterlene® LLM100 is a metallocene linear low density polyethylene tailored for applications that require excellent clarity, gloss, toughness and heat seal.Typical blown film applications include, seal layer in coextrusions, heavy duty packaging and clarity packaging.Osterlene LLM100 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.
Osterlene® LLH300-B
Polymer Name:
Linear Low Density Polyethylene (LLDPE)
Processing Methods:
Extrusion
Osterlene® LLH300-B by Osterman & Company Inc. is comprised of Linear Low Density Polyethylene. It is commonly used
EPITEC® Nylon-273G
Polymer Name:
Polyamide 66 (PA 66)
Processing Methods:
Extrusion, Stretch Blow Injection Molding, Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
9307.9 - 9307.9 MPa
EPITEC® Nylon-273G by Osterman & Company Inc. is comprised of Polyamide 66. It is commonly used
Osterlene® LD02520 (-A, -SA)
Polymer Name:
Low Density Polyethylene (LDPE)
Processing Methods:
Extrusion
Osterman & Company Inc. Osterlene® LD02520 (-A, -SA) is designed for heavy duty film applications. Superior puncture resistance combined with excellent impact properties make this resin an ideal choice for bags used to package fertilizer, peat moss, decorative stone and agricultural and construction materials.LD02520 has been designed for excellent processability, bubble stability and good heat sealing over a wide range of extrusion conditions. Optimum properties are found at melt temperatures of 330°-430°F (165°-221°C) and blow-up ratios between 1.8:1 and 2.5:1. Drawdown to 1.5 mil (38.1 microns) is possible at commercial rates when proper extrusion techniques are used. Specific recommendations can be made only when the end use applications, required properties and processing equipment are known. For exact recommendations, contact your Osterman Sales Representative. ?Osterlene LD02520 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman ESENTTIA S.A. - Polypropylene Homopolymer Friday, June 14, 2019 General Information
Osterlene® LLH0825 (-A, -B)
Polymer Name:
Linear Low Density Polyethylene (LLDPE)
Processing Methods:
Film Extrusion, Extrusion
Osterman & Company Inc. Osterlene® LLH0825 (-A, -B) is a hexene copolymer LLDPE film resin. This product has outstanding toughness properties, especially impact and tear strength, compared to other hexene polymers. It is stabilized for blown film extrusion and is available without slip or antiblock, making it well suited for blown stretch film.Features include good tear strength, toughness, and impact resistance and is a high strength resin.
Osterlene® PPR02CL
Polymer Name:
Polypropylene Random Copolymer (RCP)
Processing Methods:
Extrusion, Blow Molding, Thermoforming
Osterman & Company Inc. Osterlene® PPR02CL is a random polypropylene that is clarified with high clarity and gloss, low odor and taste transfer, and good regrind stability.Suggested uses for PPR02CL includes, extrusion, blow molding and thermoforming where enhanced clarity is desired.Osterlene PPR02CL meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.
Osterlene® LLO100 (-B, -A, -SA)
Polymer Name:
Linear Low Density Polyethylene (LLDPE)
Processing Methods:
Extrusion
Osterman & Company Inc. Osterlene® LLO100 (-B, -A, -SA) is an octene copolymer film resin with easy processability, high toughness and strength and excellent seal properties.LLO100 applications include food packaging, freezer film, lamination and sealant film, heavy duty shipping sacks and high strength packaging.Osterlene LLO100 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman Sales Representative for more information.
Osterlene® PPR02CLNX
Polymer Name:
Polypropylene Random Copolymer (RCP)
Processing Methods:
Extrusion, Blow Molding
Osterman & Company Inc. Osterlene® PPR02CLNX is a random copolymer formulated with advanced clarifier technology and with antistat and is specially designed to excel in extrusion blowmolding processes. EBM bottles have exceptional gloss and low haze. Applications best suited for this grade include extrusion blowmolding processes.Osterlene PPR02CLNX meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.
Osterlene® GPPS1.600
Polymer Name:
General Purpose Polystyrene (GPPS)
Processing Methods:
Extrusion
Osterman & Company Inc. Osterlene® GPPS1.600 is a high molecular weight, low melt flow, crystal polystyrene.This polymer is tailored for extruded foam applications such as egg cartons, meat trays and food service.GPPS1.600 also makes a superior oriented polystyrene sheet.
Osterlene® HIPS0302
Polymer Name:
High Impact Polystyrene (HIPS)
Processing Methods:
Thermoforming, Extrusion
Osterman & Company Inc. Osterlene® HIPS0302 is a high impact polystyrene designed specifically for extrusion/thermoforming.The polymer's balanced properties and processing characteristics make it especially suitable for industrial packaging deep draw thermoforming and custom multi-layer sheet extrusion.This popular resin has established itself as the standard extrusion grade high impact polystyrene.
Osterlene® LLB2019 (-SA, -SAH)
Polymer Name:
Linear Low Density Polyethylene (LLDPE)
Processing Methods:
Extrusion
Osterman & Company Inc. Osterlene® LLB2019 (-SA, -SAH) has exceptional toughness and strength and ease of extrusion.Applications for LLB2019 include trash bags, liners, general packaging, industrial liners, heavy duty bags, stretch wrap, blend resin and industrial packaging.Osterlene LLB2019 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.
Osterlene® LD07520 (-A, -SA)
Polymer Name:
Low Density Polyethylene (LDPE)
Processing Methods:
Extrusion
Osterman & Company Inc. Osterlene® LD07520 (-A, -SA) is designed for a wide variety of industrial film applications where high impac t strength and excellent drawdown are needed. LD07520 exhibits uniformity, ease of processing and good tensile strength.Generally recommended extrusion conditions include a melt temperature range of 310°-350°F (155°-177°C) and a blow-up ratio range of 1.8-2.5:1. Drawdown to gages below 1.0 mils (<25 microns) is possible at commercial rates when proper techniques are used. Specific limitations may apply, contact your Osterman sales representative for more information.Osterlene LD07520 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.