Osterlene® LD600 (-B, -SA)

1 of 105 products in this brand

Osterman & Company Inc. Osterlene® LD600 (-B, -SA) is a low density polytheylene resin. Its a garment film resin with good toughness. It is capable of being drawn-down to thin gages.LD600 meets the requirements of the Food and Drug Administration, 21 CFR Section 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations may apply. Contact your Osterman sales representative for more information.Specific recommendations for processing LD600 can only be made when the processing conditions, equipment and end use are known. For further suggestions, please contact your sales representative.

Polymer Name: Low Density Polyethylene (LDPE)

Processing Methods: Blow Molding

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Chemical Family: Polyethylenes,
Polyolefins
Polymer Name: Low Density Polyethylene (LDPE)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Basic Thermoplastics
Polyolefins

Features & Benefits

Labeling Claims: Food Contact Acceptable
Materials Features: Food Contact Acceptable,
Good Drawdown,
Good Toughness,
Low Density

Applications & Uses

Markets: Printing & Packaging
Applications: Printing & Packaging — Packaging
Food & Beverage Packaging
Plastics & Elastomers End Uses: Film
Plastics & Elastomers Processing Methods: Blow Molding

Properties

Physical Properties
Mechanical Properties
Thermal Properties
Film Properties
Optical Properties

	Value	Units	Test Method / Conditions
Melt Mass-Flow Rate - MFR (190°C/2.16 kg)	6.5	g/10 min	ASTM D1238
Density	0.921	g/cm3	ASTM D1505

	Value	Units	Test Method / Conditions
Dart Drop Impact Strength	70	g	ASTM D1709

	Value	Units	Test Method / Conditions
Peak Melting Temperature	230	°F	ExxonMobil Method

	Value	Units	Test Method / Conditions
Tensile Strength at Break - MD	2610	psi	ASTM D882
Tensile Strength at Break - TD	2030	psi	ASTM D882
Tensile Elongation at Break - MD	230	%	ASTM D882
Tensile Elongation at Break - TD	480	%	ASTM D882
Secant Modulus - MD	26100	psi	ASTM D882
Secant Modulus - TD	30500	psi	ASTM D882
Elmendorf Tear Strength - TD	180	g	ASTM D1922
Elmendorf Tear Strength - MD	400	g	ASTM D1922

	Value	Units	Test Method / Conditions
Gloss	70	-	ASTM D2457
Haze	8	%	ASTM D 1003

Packaging & Availability

Country Availability: Canada,
USA
Regional Availability

Osterlene® LD600 (-B, -SA)

Similar Products

SBC818R50

SBF0323/12HC

SBF0323HC

SEB853

SEB853/72

SLD4004

Knowde Enhanced TDS