Products

ALKONAT® L 70 is a line of product comprised of different degrees of alcohol ethoxylate obtained from the reaction of lauryl alcohol derived from natural and renewable sources with ethylene oxide (EO).

Sodium lauryl ether (2)sulfate 28%

ALKONAT® L 40 is a line of products comprised of different degrees of alcohol ethoxylate obtained from the reaction of lauryl alcohol derived from natural and renewable sources with ethylene oxide (EO).

NEOMINOX® LA is a Lauryldimethylamine Oxide where the alkyl group is derived from natural, renewable sources and is readily biodegradable. This amine oxide provides excellent grease-cutting, viscosity building and foam. It is compatible with most ingredients including hypochlorite, peroxide, acids and bases. It can be formulated in conditioning shampoos, hand and dish wash, bath products, hard surface cleaners, skin cleansers, alkaline cleaners, hair conditioners, bathroom cleaners and hand soaps.

ALKOPON® NS ECO 92 is an excellent anionic surfactant, extensively used in cosmetic formulations. It is a high foaming ingredient suitable for soap and toothpaste formulations. It is a surfactant that is biodegradable and safe for contact with skin. Its process does not form dioxane, therefore, it can be used in formulations that have dioxane free claim.

ALKEST® TW 20 is made up of ethoxylated sorbitan esters,Depending on the starting fatty acid and the degree of ethoxylation,with a wide range of HLB (Hydrophilic-Lipophilic Balance) values are obtained, which provides the formulator with a versatile set of emulsifiers to choose from.

The ALKEST® TW 80 K is made up of ethoxylated sorbitan esters. The products in the ALKEST® TW line are hydrophilic, having high HLB values. The presence of the polyoxyethylene chain makes the products in the ALKEST® TW line soluble or dispersible in water, which favors their application in oil-in-water (O/W) emulsions, as dispersants/solubilizers of oils and fragrances, and as co-surfactants and humectants in shampoos, hand soaps, and body washes. ALKEST® SP 60 and ALKEST® SP 80, when used in combination with ALKEST® TW 60 or 80, are excellent emulsifiers for beeswax, paraffin, carnauba and their mixtures, promoting stability and homogeneity of formulations.

The ALKEST® SP line is made up of sorbitan esters derived from the reaction of sorbitol with fatty acids. Products from the ALKEST® SP line are lipophilic, having low HLB values. The lipophilic nature makes these products soluble or dispersible in oil, favoring their use in water-in-oil (W/O) emulsions and as low HLB emulsifiers used in combination with high HLB emulsifiers in oil-in-water (O/W) emulsions. ALKEST® SP 60 and ALKEST® SP 80, when used in combination with ALKEST® TW 60 or 80, are excellent emulsifiers for beeswax, paraffin, carnauba and their mixtures, promoting stability and homogeneity of formulations. To prepare cosmetic creams and lotions, the selection of fatty acids and degrees of ethoxylation allow many combinations between the ALKEST® SP and ALKEST® TW products to obtain the right balance of emulsifiers for optimum performance and stability.

The ULTRAPEG® product line is made up of ethylene oxide polymers. It is represented by the following general formula: HO(CH2CH2O)nH According to the degree of ethoxylation(n), products with different molecular weights and melting points can be obtained, which allows the use of these products in various applications. The hydrophilicity of the polyoxyethylene chain from the ULTRAPEG® product line allows for the obtention of a hygroscopic polymer which is highly water soluble. By varying the molecular weight, liquid or solid products may be obtained, covering a wide range of viscosities and consistencies.

OXITAINE CB 30 has a higher content of renewable, vegetable-based carbon compared to traditional types of betaines, such as Cocamidopropyl Betaine. Considered a multifunctional product, when used in association with ALKOPON® it increases foam volume and viscosity of the formulation. It also provides mild conditioning and improved combing. OXITAINE CB 30 is suitable for low pH formulations such as products that contain alpha hydroxyl acids (AHA).

ALKONAT® L 100 is a line of products comprised of different degrees of alcohol ethoxylate obtained from the reaction of lauryl alcohol derived from natural and renewable sources with ethylene oxide (EO).

ALKEST® TW 60 is made up of ethoxylated sorbitan esters,Depending on the starting fatty acid and the degree of ethoxylation,with a wide range of HLB (Hydrophilic-Lipophilic Balance) values are obtained, which provides the formulator with a versatile set of emulsifiers to choose from.

Sodium lauryl ether (2)sulfate 70%

ALKEST® TW 80 is made up of ethoxylated sorbitan esters,Depending on the starting fatty acid and the degree of ethoxylation,with a wide range of HLB (Hydrophilic-Lipophilic Balance) values are obtained, which provides the formulator with a versatile set of emulsifiers to choose from.

Sodium lauryl sulfate 30%

ALKONAT® L 90 is a line of product comprised of different degrees of alcohol ethoxylate obtained from the reaction of lauryl alcohol derived from natural and renewable sources with ethylene oxide (EO).

The ALKEST® SP line is made up of sorbitan esters derived from the reaction of sorbitol with fatty acids. Products from the ALKEST® SP line are lipophilic, having low HLB values. The lipophilic nature makes these products soluble or dispersible in oil, favoring their use in water-in-oil (W/O) emulsions and as low HLB emulsifiers used in combination with high HLB emulsifiers in oil-in-water (O/W) emulsions. ALKEST® SP 60 and ALKEST® SP 80, when used in combination with ALKEST® TW 60 or 80, are excellent emulsifiers for beeswax, paraffin, carnauba and their mixtures, promoting stability and homogeneity of formulations. To prepare cosmetic creams and lotions, the selection of fatty acids and degrees of ethoxylation allow many combinations between the ALKEST® SP and ALKEST® TW products to obtain the right balance of emulsifiers for optimum performance and stability.

ALKONAT® L 20 is a line of products comprised of different degrees of alcohol ethoxylate obtained from the reaction of lauryl alcohol derived from natural and renewable sources with ethylene oxide (EO).

ALKONAT® L 80 is a line of product comprised of different degrees of alcohol ethoxylate obtained from the reaction of lauryl alcohol derived from natural and renewable sources with ethylene oxide (EO).

NEOMINOX® LP is an Alkylamidopropyldimethylamine Oxide where the alkyl group is derived from natural, renewable sources. It is derived from cocamidopropylamine oxide. Alkylamidopropylamine Oxides are considered nonionic/amphoteric surfactants and are compatible with all surfactant classes: anionic, nonionic, amphoteric and cationic. In addition, Alkylamidopropylamine Oxides can mitigate the irritation effects of anionic surfactants and are recommended to be used in combination with our ALKOPON® anionic product line. Alkylamidopropylamine Oxides are traditionally used as secondary surfactants in hand and dish wash, car wash and hand soaps formulations due to their excellent foam boosting, foam stabilizing, grease cutting and viscosity building properties. NEOMINOX® LP may also be used in conditioning shampoos, bubble bath products, skin cleansers, body washes and hand soaps.

Alkylamine oxides are considered non-ionic/amphoteric surfactants and are compatible with all surfactant classes: anionic, non-ionic, amphoteric and cationic. Alkylamine oxides can minimize the irritating effects of anionic surfactants and are recommended for use in combination with ALKOPON® line of products in dishwashing, laundry and surface cleaning detergents.

Sodium lauryl sulfate 92%

The ULTRAPEG® product line is made up of ethylene oxide polymers. It is represented by the following general formula: HO(CH2CH2O)nH According to the degree of ethoxylation(n), products with different molecular weights and melting points can be obtained, which allows the use of these products in various applications. The hydrophilicity of the polyoxyethylene chain from the ULTRAPEG® product line allows for the obtention of a hygroscopic polymer which is highly water soluble. By varying the molecular weight, liquid or solid products may be obtained, covering a wide range of viscosities and consistencies.

ALKONAT® L 60 is a line of product comprised of different degrees of alcohol ethoxylate obtained from the reaction of lauryl alcohol derived from natural and renewable sources with ethylene oxide (EO).

ALKONAT® L 230 is a line of products comprised of different degrees of alcohol ethoxylate obtained from the reaction of lauryl alcohol derived from natural and renewable sources with ethylene oxide (EO).

ALKONAT® L 30 by Oxiteno is comprised of Laureth-10. It is commonly used as Emulsifying Agent, Foaming Agent, Solubilizer, Surfactant, Tanning Agent, Wetting Agent, Detergent Additive, Penetration Enhancer, etc for a variety of applications in Home Care.

Fatty acid diethanolamide 90%

ALKONAT® L is a line of products comprised of different degrees of alcohol ethoxylate obtained from the reaction of lauryl alcohol derived from natural and renewable sources with ethylene oxide(EO)

ALKONAT® L is a line of products comprised of different degrees of alcohol ethoxylate obtained from the reaction of lauryl alcohol derived from natural and renewable sources with ethylene oxide(EO)

The ULTRAPEG® product line is made up of ethylene oxide polymers. It is represented by the following general formula: HO(CH2CH2O)nH According to the degree of ethoxylation(n), products with different molecular weights and melting points can be obtained, which allows the use of these products in various applications. The hydrophilicity of the polyoxyethylene chain from the ULTRAPEG® product line allows for the obtention of a hygroscopic polymer which is highly water soluble. By varying the molecular weight, liquid or solid products may be obtained, covering a wide range of viscosities and consistencies.

Fatty acid diethanolamide 80%

The ALKEST® SP line is made up of sorbitan esters derived from the reaction of sorbitol with fatty acids. Products from the ALKEST® SP line are lipophilic, having low HLB values. The lipophilic nature makes these products soluble or dispersible in oil, favoring their use in water-in-oil (W/O) emulsions and as low HLB emulsifiers used in combination with high HLB emulsifiers in oil-in-water (O/W) emulsions. ALKEST® SP 60 and ALKEST® SP 80, when used in combination with ALKEST® TW 60 or 80, are excellent emulsifiers for beeswax, paraffin, carnauba and their mixtures, promoting stability and homogeneity of formulations. To prepare cosmetic creams and lotions, the selection of fatty acids and degrees of ethoxylation allow many combinations between the ALKEST® SP and ALKEST® TW products to obtain the right balance of emulsifiers for optimum performance and stability.

Coco diethanolamide 80%

Coco diethanolamide 90%

ALKEST® TW 327 is made up of ethoxylated sorbitan esters,Depending on the starting fatty acid and the degree of ethoxylation,with a wide range of HLB (Hydrophilic-Lipophilic Balance) values are obtained, which provides the formulator with a versatile set of emulsifiers to choose from.