ULTRAPEG® 4000 F

1 of 16 products in this brand
The ULTRAPEG® product line is made up of ethylene oxide polymers. It is represented by the following general formula: HO(CH2CH2O)nH According to the degree of ethoxylation(n), products with different molecular weights and melting points can be obtained, which allows the use of these products in various applications. The hydrophilicity of the polyoxyethylene chain from the ULTRAPEG® product line allows for the obtention of a hygroscopic polymer which is highly water soluble. By varying the molecular weight, liquid or solid products may be obtained, covering a wide range of viscosities and consistencies.

INCI Name: PEG-75

Functions: Anti-Caking Agent, Anti-Static Agent, Binder, Conditioner, Fixative, Humectant, Plasticizer, Solubilizer, Viscosity Modifier

Ingredient Origin: Synthetic

Labeling Claims: Clean at Sephora

Technical Data Sheet

Similar Products

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Name
INCI Name
Ingredient Origin
CAS No.
25322-68-3
EC No.
500-038-2

Features & Benefits

Labeling Claims

Applications & Uses

Bath & Shower Applications
Color Cosmetic Applications
Hair Care Applications
Home Care Applications
I&I Cleaning Applications
Personal Hygiene Applications
Recommended Uses

 

  • Adhesives
  • Agrochemical
  • Rubber
  • Ceramic
  • Leathers
  • Detergents
  • Paper
  • Treatment Of Wood
  • Treatment Of Metals
  • Textile
  • Personal Care

Properties

Physical Form
Soluble in
Water
Typical Properties
ValueUnitsTest Method / Conditions
Acid Numbermax. 0.5mgKOH/g
Ash Contentmax. 0.1%
Hydroxyl Number25-31mgKOH/g
Molecular Weight (Average)3600-4400
Water Contentmax. 1%
pH Value4.5 - 7.5

Regulatory & Compliance

Certifications & Compliance
Regulatory Clearances

The products in the ULTRAPEG® line are used in U.S. Personal Care products under their INCI names as found in the Cosmetic Ingredient Handbook. They can also be used as indirect food contact ingredients in accordance with the Food and Drug Administration - FDA.

Packaging & Availability

Country Availability
Regional Availability
  • Europe
  • North America

Storage & Handling

Storage And Handling
  • The products in the ULTRAPEG line have low toxicity levels and are readily biodegradable. Use proper personal protective equipment (PPE) when handling the products, such as PVC gloves, safety goggles, and coat.

In case of accidental contact, proceed as follows:

  • eyes: wash immediately with abundant water for at least 15 minutes;
  • skin: remove the contaminated clothing and wash the affected sites with abundant water;
  • ingestion: seek urgent medical care.
  • Store these products in sealed containers, in a sheltered, dry place, away from sources of heat or ignition. Because these products are hygroscopic, we recommend storing them on cement floors at low humidity.
  • Handle chemical products in well-ventilated areas, with ready access to emergency showers and eyewash stations.
  • The products in the ULTRAPEG® line are considered non-flammable. When heated to temperatures above their flash point, decomposition may occur. In case of actual fire, please consult the appropriate MSDS.
  • For bulk storage of products in the ULTRAPEG® line with molecular weights of 600 or more, use tanks made of AISI 304 or 316 stainless steel or carbon steel coated with vinyl ester resin. These tanks should have internal coils made of 304 or 316 stainless steel installed at the bottom and provided with hot water at temperatures of 70 to 80ºC. Steam is not recommended as product may darken at high heat. In addition, a recirculation system is recommended to homogenize the product before use. Repeated heating and cooling of ULTRAPEG® 600 may cause darkening over time. At their lowest viscosities, centrifugal pumps are adequate for discharge and transfer of product. Use nitrogen blankets for storage to help prevent darkening and minimize water absorption due to the hygroscopic characteristic of the ULTRAPEG® Line.
  • To handle products in the ULTRAPEG® line with molecular weights over 600, packaged in drums, we recommend heating in ovens, water baths or with thermal tapes at temperatures of 60°C to 80°C for only as long as it takes to melt and homogenize the products before use.