Perstorp AB
Perstorp AB Sodium Formate
CAS Number: 141-53-7
Sodium Formate (CAS: 141-53-7) is a high purity organic sodium salt. It can be used as an intermediate for a variety of industrial, manufacturing and HI&I applications. Benefits Non-corrosive Provides excellent performance and environmental benefits Features Monosodium salt of formic acid White crystalline material (also available in liquid versions) High purity (consistent 98% purity vs. industry average 95%) Low-water-content Fully soluble in water Heavy metal free Not classified as hazardous to health or the environment Applications Mineral acids Liquid laundry detergent Pulp and paper Textiles Leather tanning Airport runway de-icers Oil and gas exploration Gycol-free antifreeze Feed acidifier and antimicrobial agent (feed-grade) Heat transfer fluids, specialty lubricants, washing and cleaning products
Perstorp AB
Ymer™ N120
Applications: Textile Manufacturing, Resin Manufacturing, Chemical Manufacturing
Product Families: Diols & Polyols, Monomers, Dispersing & Wetting Additives
Chemical Family: Polyols, Polyglycols, Polyethylene Glycols
End Uses: Cosmetics, Resins, Waterborne Coating
Ymer™ N120 (CAS: 131483-27-7) is a polymeric nonionic dispersing monomer that can be fine-tuned from hard and rigid to soft and flexible to meet specific properties of dispersions while maintaining stability. Features Contains two primary hydroxyl groups Well-balanced ethoxylated chain length Applications Waterborne resins systems (e.g. alkyd, epoxy, polyester, polyurethane) Polyurethane dispersions Hydrophilic PU-systems Surfactants Fiber sizing Cosmetics Chemical building block
Perstorp AB
Amicult™ K 42
Applications: Vegetables, Sugar & Starch Crops, Herbs & Spice Crops
Product Families: Fertilizers & Nutrients, Plant Health, Nutrients & Soil Management
Amicult™ K42 is a potassium-rich nutrient that can be used for irrigation and fertigation applications and as raw material in liquid fertilizer formulations. Benefits Safe to handle Proven higher yield and crop quality effects in foliar fertilization Improved efficiency in drip irrigation Features Potassium salt dissolved in water Chloride free fertilizer that decreases salinity problems Applications Liquid fertilizers Fertigation Foliar fertigation
Perstorp AB
Pevalen™
Applications: Jacketing & Insulation, Luggage & Leather Goods, Industrial & Transport Packaging
Product Families: Performance Additives, Processing Aids, Polymer Additives
End Uses: Wires, Cables, Automotive Interior Trim
Pevalen™ (CAS: 15834-04-5) is a non-phthalate plasticizer for flexible PVC. It is designed for close-to-consumer applications for a variety of industries, including automotive, building and construction, consumer goods and printing and packaging. Benefits Phthalate-free Manufacturing process reduces use of finite raw materials Features High plasticizing efficiency (equal or better vs. traditional general purpose plasticizers) Excellent processing properties Exceptional UV resistance Low volatility and smoke Applications Coated fabrics Artificial leather Flooring Wall covering Automotive interiors PVC plastisols Food contact applications Sports and leisure products Automotive interiors Pool liners
Perstorp AB
Perstorp AB Formic Acid 85%
CAS Number: 64-18-6
Formic Acid 85% (CAS: 64-18-6) is a colorless carboxylic acid used as a raw material or pH-adjuster for chemical synthesis, an intermediate in pharmaceuticals and fine chemical applications and as active ingredient in cleaning agents. End uses Dyeing and impregnation of textiles Tanning, dyeing, sterilization, preservation and acidification of skins and hides Wastewater treatment Cleaning fluids Fish silage and animal feed
Perstorp AB
Perstorp AB Trimethylolpropane
CAS Number: 77-99-6
Trimethylolpropane (CAS: 77-99-6) is an intermediate used in saturated polyesters, alkyds, polyurethanes, acrylic acid esters for radiation curing, esters, rosin esters and for surface treatment. Features Three hydroxyl groups White flake material Applications Paints Coil coatings Synthetic lubricants Radiation curing Pigment coating Coatings and foams
Perstorp AB
Boltorn™ H311
Molecular Weight: 5700.0 - 5700.0 g/mol
Boltorn™ H311 is a dendritic polymer polyol that can be used as an effective load builder for high firmness molded foam and high resilience (HR) slabstock foam, and to replace copolymer polyols of styrene acrylonitrile (SAN)-type or conventional-type crosslinkers. Benefits More efficient than SAN-type polymer polyols in providing compressive loads at given solids level Foam formulations with lower total solids levels Provides exceptionally high FD or CFD loads Increases foam stability and allows for high firmness at low density Features Dendritic polymer polyol with high hydroxyl functionality Highly branched flexible backbone with more than 20 primary hydroxyl groups Contains 10 % water Viscous liquid at room temperature Excellent solubility in polyether polyols, glycols and polyalcohols
Perstorp AB
Boltorn™ P500
Molecular Weight: 1800.0 - 1800.0 g/mol
Boltorn™ P500 is an intermediate used as a precursor for UV-curing acrylate oligomers and as a cross-linking polymer polyol for flexible polyurethane foams. Features Good balance between hardness and flexibility and reactivity Exceptional relationship between viscosity, molecular weight and functionality Applications Automotive seating Polyurethane foams UV-curable acrylic materials
Perstorp AB
Perstorp AB Propionic Acid
Applications: Other Food Applications, Food
Product Families: Antioxidants & Preservatives, Functional Additives
Chemical Family: Carboxylic Acids & Derivatives
End Uses: Food Preservation, Flavors
Propionic Acid (CAS:79-09-4) is a preservative and mold inhibitor. It is used as free acid or as sodium/calcium salts in feed and food, and in ester solvents, pharmaceutical intermediates, herbicides, synthetic flavors and fragrances. Benefits Biodegradable Features One carboxylic group Colorless liquid Miscible in water
Perstorp AB
Perstorp AB 2-Ethylhexanoic Acid
Applications: Chemical Manufacturing, Fluids & Lubricants, Other Pharmaceutical Manufacturing Applications
Product Families: Surface Protective Additives, Performance Additives, Functional Additives
Chemical Family: Carboxylic Acids & Derivatives
2-Ethylhexanoic Acid (2-EHA) (CAS: 149-57-5) is a corrosion inhibitor and plasticizer used in esters for PVB film plasticizers and synthetic lubricants, and in a variety of applications from automotive coolants to pharmaceuticals. Features One carboxylic group based on a C8 carbon chain Colorless liquid Applications Plasticizers Lubricants Siccatives/paint driers PVC stabilizers PUR catalysts Anti-fungi additives Corrosion inhibition in automotive coolants Processing aid in chemicals and pharmaceuticals
Perstorp AB
Perstorp AB Valeric Acid Pro
Applications: Chemical Manufacturing, Chemical & Industrial Manufacturing
Product Families: Other Additives, Additives
Valeric Acid Pro is a pro-environment carboxylic acid (CAS: 109-52-4) that can be used as an intermediate in fluids and lubricants. Benefits Based on mass balance concept Designed to reduce carbon footprint Supports sustainable sourcing of renewable raw materials Third party certified according to the ISCC system* Features Based on 20% renewable resources Ready to be dropped into existing formulations Applications Aviation lubricants Refrigeration lubricants Esters for synthetic lubricants * Traceability back to the country of origin, ensuring the biomass was sourced in a sustainable way as well as a certified mass balance and greenhouse gas (GHG) calculation.
Perstorp AB
Perstorp AB Phthalic Anhydride
CAS Number: 85-44-9
Purity (Assay): 99.8 - 99.8 %
AB Phthalic Anhydride (CAS: 85-44-9) is a biodegradable intermediate used to produce unsaturated polyester resins (UPRs) and alkyd resins for the coatings industry, and as raw material for phthalate PVC plasticizers such as Perstorp's Emoltene™ 100.
Perstorp AB
Perstorp AB Neopentyl Glycol
CAS Number: 126-30-7
Neopentyl Glycol (CAS: 126-30-7) is an intermediate used in saturated and unsaturated polyesters and esters. Features White flakes Biodegradable Two primary hydroxyl groups Applications Powder coatings, coil coatings and other stoving enamels Gel coats and reinforced plastics Synthetic lubricants
Perstorp AB
Boltorn™ U3000
Applications: Architectural Coatings, Building Envelope, Building & Construction
Product Families: Functional Additives, Additives
Chemical Family: Dendritic Polymers
End Uses: Waterborne Coating
Boltorn™ U3000 is a fully fatty acid-modified dendritic polymer with a high concentration of unsaturation. It is used in wood stains and alkyd paints for outdoor applications. Features Branched structure provides unique flow properties Low VOC Low viscosity Dries rapidly Outdoor durability
Perstorp AB
Boltorn™ P1000
Molecular Weight: 1500.0 - 1500.0 g/mol
Boltorn™ P1000 is a liquid, low viscosity dendritic polyester and polyether blend used as a precursor for UV/EB curable acrylates. Benefits Allows monomer-free formulation The acrylate of Boltorn™ P1000 yields “ready to go“ coatings with excellent reactivity, hardness, flexibility, abrasion resistance, chemical resistance, low water sensitivity and low extractables Features Exceptionally low viscosity and low shrinkage High molecular weight and high reactivity High hydroxyl number Viscous liquid at room temperature End uses UV-digital printing
Perstorp AB
Perstorp AB 2-Ethylhexanol
CAS Number: 104-76-7
Purity (Assay): 99.6 - 99.6 %
2-Ethylhexanol (CAS: 104-76-7) is an intermediate that can be used in the production of dioctyl phthalate, acrylates, 2-ethylhexyl nitrate, special plasticizers, and other applications. Features One primary hydroxyl group Colorless liquid Applications Ester oils (non-vinyl) Herbicides Lubricating oils Manufacturing of phthalate, plasticizers and polyacrylate Mining chemicals Vinyl applications
Perstorp AB
Polyol 3990
CAS Number: 77-99-6
Molecular Weight: 170.0 - 170.0 g/mol
Polyol 3990 is a tri-functional liquid polyol with primary hydroxyl groups. It is used as an intermediate in chemical and industrial manufacturing applications. Applications Chemical building block Precursor for free radical radiation-curing monomers and oligomers Cosslinker in polyurethanes
Perstorp AB
Bis-MPA™
CAS Number: 4767-03-7
Bis-MPA™, or Dimethylol Propionic Acid (DMPA) (CAS: 4767-03-7), is a versatile hindered diol. It is used as a key building block in polyurethane dispersions (PUD) for coatings and adhesives, chemical syntheses, and in solventborne alkyds and other resin technologies. Benefits Only small amount needed to create stable dispersions Produces excellent water resistance Non-toxic Odor-free Improves adhesive strength Features Trifunctional organic compound of neopentyl structure One tertiary carboxylic and two primary hydroxylic groups Odorless, free-flowing white crystalline solid Essentially non-toxic Air drying Hydrolysis resistance Excellent flexibilityand toughness High gloss Impact resistance Corrosion resistance Applications Polyurethane dispersions Photographic chemicals Printing inks Waterborne alkyds and polyesters Conventional alkyds and polyesters Chemical building block
Perstorp AB
Perstorp AB Formic Acid 75%
CAS Number: 64-18-6
Formic Acid 75% (CAS: 64-18-6) is a colorless carboxylic acid used as a raw material or pH-adjuster for chemical synthesis, an intermediate in pharmaceuticals and fine chemical applications and as active ingredient in cleaning agents. End uses Dyeing and impregnation of textiles Tanning, dyeing, sterilization, preservation and acidification of skins and hides Wastewater treatment Cleaning fluids Fish silage and animal feed
Perstorp AB
Perstorp AB 2-Ethylhexanoic Acid Pro
CAS Number: 149-57-5
2-Ethylhexanoic Acid Pro (CAS: 149-57-5) is a pro-enironment carboxylic acid that can be used as an intermediate in CASE ingredients, fluids and lubricants, and pharmaceuticals and nutraceuticals. Benefits Supports sustainable sourcing Designed to reduce the carbon footprint Based on mass balance concept Third party certified according to the ISCC system* Features Based on 25% renewable resources Ready to be dropped into existing formulations Applications PVB film plasticizers Lubricants Siccatives/paint driers PVC stabilizers PUR catalysts Anti-fungi additives Corrosion inhibitor in coolants Processing aid in chemicals and pharmaceuticals * Traceability back to the country of origin, ensuring the biomass was sourced in a sustainable way, and has a certified mass balance and greenhouse gas (GHG) calculation.
Perstorp AB
Polyol 4640
Molecular Weight: 360.0 - 360.0 g/mol
Polyol 4640 is a tetrafunctional liquid polyol with primary hydroxyl groups. It is used as an intermediate in industrial and chemical manufacturing applications. Applications Chemical building block Crosslinker in polyurethanes, Precursor for free radical radiation-curing monomers and oligomers
Perstorp AB
Curalite™ Ox
CAS Number: 3047-32-3
Curalite™Ox (CAS: 3047-32-3) is one of the main components of UV/EB cationic formulations as a reactive diluent. It is used in paint and coatings and printing and packaging applications. Benefits Increases through cure and chemical resistance of the formulation Features Increased reactivity Good diluting power Low viscosity Odor free Non-skin irritating Applications Cationic UV printing inks and overprint varnishes for metal and plastic substrates
Perstorp AB
Perstorp AB Sodium Formate S Grade
CAS Number: 141-53-7
Sodium Formate S Grade (CAS: 141-53-7) is a high-purity organic sodium salt that can be used in a variety of applications (pulp and paper, textiles, leather tanning, airport de-icing, oil and gas exploration, antifreeze). Benefits Provides excellent performance and environmental benefits Features Monosodium salt of formic acid High purity white crystalline material Low water content Fully soluble in water Heavy metal free Not classified as hazardous to health or the environment Applications In the production of sodium hydrosulphite, a reductive bleaching agent for pulp and paper and vat and sulfur-containing dyes, and for the removal of pigments in textiles As a pH-neutralizer in leather tanning formulations to stabilize chromium, resulting in better leather quality, penetration and reduced tanning time As a non-corrosive de-icing agent for airport runways As drilling and stabilizing aids in oil and gas exploration As a glycol-free antifreeze additive
Perstorp AB
Ymer™ N90
Applications: Resin Manufacturing, Chemical Manufacturing, Chemical & Industrial Manufacturing
Product Families: Dispersing & Wetting Additives, Diols & Polyols, Additives
Chemical Family: Polyols, Polyglycols, Polyethylene Glycols
End Uses: Alkyd Resins, Coatings, Epoxy Resins
Ymer™ N90 is a polymeric nonionic dispersing monomer that can be used to disperse polyurethanes, alkyds and polyesters in water. It is used in a range of applications, including flexible and abrasion-resistant formulations for leather and textiles and soft-feel coatings for plastics. Benefits VOC-free Allows fine tuning of specific properties of waterborne polyurethane dispersions Adds softness, stability and flexibility Features Difunctional polyethylene glycol monomethyl ether Designed with a long ethoxylated chain Contains two primary hydroxyl groups which are incorporated in the polymer White/opaque amorphous material Easily dispersible Good pH stability Freeze/thaw stability Solvent resistance
Perstorp AB
Perstorp AB Isononanoic Acid
CAS Number: 3302-10-1
The branched Isononanoic Acid from Perstorp is a high purity building block for formulations with specific performance requirements. As a base stock, it is used in engineered fluids of more environmental-friendly refrigerant technologies or top performing aviation turbine oils.Isononanoic acid (CAS: 3302-10-1) is a critical carboxylic acid intermediate. It is used in the production of polyol ester based synthetic lubricants for refrigeration or aviation. The high and consistent purity of the product provides precise and reliable attributes to the applications.Isononanoic acid is also used as a corrosion inhibitor in industrial fluids and coolants; as a monomer in the synthesis of alkyd resins for stoving enamels and two-component paints. Other Applications for Isononanoic acid include paint driers and acid chlorides.
Perstorp AB
Polyol 3611 (low water for PU)
CAS Number: 50586-59-9
Molecular Weight: 280.0 - 280.0 g/mol
Polyol 3611 is a tri-functional liquid polyol with primary hydroxyl groups. It is used as an intermediate in polyurethane manufacturing applications. Features Very low water content Applications Chemical building block Crosslinker in polyurethanes
Perstorp AB
Charmor™ PM15
CAS Number: 115-77-5
Charmor™ PM15 is a polyhydric alcohol that creates a foam with high expansion factor. It is used for intumescent coating systems. Benefits Allows customization of the intumescent system performance Provides increased thermal insulation in confined spaces Features Contains four primary hydroxyl groups, milled into small, controlled particles (less than 15 microns)
Perstorp AB
Ymer™ N180
Applications: Resin Manufacturing, Chemical Manufacturing, Floor Coatings
Product Families: Dispersing & Wetting Additives, Diols & Polyols, Additives
Chemical Family: Polyols, Polyglycols, Polyethylene Glycols
End Uses: Alkyd Resins, Epoxy Resins, Fiber Sizing
Ymer™ N180 is a polymeric nonionic dispersing monomer that can be used to disperse polyurethanes, alkyds and polyesters in water. It is used in a range of applications, including durable wood flooring coatings and weather resistant coatings for outdoor surfaces. Benefits Allows fine tuning of specific properties of waterborne polyurethane dispersions Enhances hardness and durability in solvent-free polyurethane dispersions Minimizes the level of harmful amines in production Reduces the amount of harmful amines in the PUD Improves pigment wetting Features Difunctional polyethylene glycol monomethyl ether Designed with a short ethoxylated chain Contains two primary hydroxyl groups which are incorporated in the polymer White/opaque liquid Easily dispersible Weather resistance Good pH stability Freeze/thaw stability Solvent resistance
Perstorp AB
Charmor™ PM40
Applications: EIFS & Insulation, Structural Components, Parking Structures & Stadiums
Product Families: Functional Additives, Performance Additives, Flame Retardants
Chemical Family: Polyols
End Uses: Intumescent Coating, Railway Pads, Railway Insulation Plates
Charmor™ PM40 is a polyhydric alcohol that creates a foam with high expansion factor. It is used for intumescent coating systems. Benefits Provides a robust and reliable intumescent effect to meet general standards Allows customization of the intumescent system performance Creates a compact stable foam structure Robust properties suitable for turbulent fire conditions Features Contains four primary hydroxyl groups, milled into small, controlled particles (less than 40 microns) Easy to formulate with
Perstorp AB
Evyron™ T20 Molten
Applications: Resin Manufacturing, Chemical Manufacturing, Pipes & Plumbing
Product Families: Diols & Polyols, Processing Aids, Antioxidants & Stabilizers
Chemical Family: Polyols (Tetrafunctional)
End Uses: Wires, Cables, Alkyd Resins
Evyron™ T20 Molten is a part-renewable Trimethylolpropane (TMP) ready to be dropped into existing formulations. It has three equally reactive hydroxyl groups making it a versatile building block with crosslinking capabilities for polyesters, polyurethanes and acrylates.
Perstorp AB
Polyol 4525
Molecular Weight: 430.0 - 430.0 g/mol
Polyol 4525 is a tetra-functional liquid polyol with secondary hydroxy groups. It is used as an intermediate in chemical and industrial manufacturing applications and in polyurethane manufacturing. Applications Chemical building block Crosslinker in polyurethanes Precursor for free radical radiation-curing monomers and oligomers
Perstorp AB
Polyol 4360
Molecular Weight: 630.0 - 630.0 g/mol
Polyol 4360 is a tetra-functional liquid polyol with secondary hydroxyl groups. It is used as an intermediate in chemical and industrial manufacturing applications and in polyurethane manufacturing. Applications Chemical building block Crosslinker in polyurethanes Precursor for free radical radiation-curing monomers and oligomers
- 1
- 2