Company logo
supplier

Perstorp AB

CASE Ingredients
12 products found on Perstorp AB Perstorp AB products found for View all CASE Ingredientson Knowde
With TDS
With SDS
Hide Blends
Ymer™ N120 product card banner

Perstorp AB

Ymer™ N120

Applications: Chemical Manufacturing, Surface Care, Chemical Building Blocks & Intermediates

Product Families: Diols & Polyols, Monomers, Dispersing & Wetting Additives

Chemical Family: Polyethylene Glycols

End Uses: Waterborne Coating

Ymer™ N120 (CAS: 131483-27-7) is a polymeric nonionic dispersing monomer that can be fine-tuned from hard and rigid to soft and flexible to meet specific properties of dispersions while maintaining stability.  Features Contains two primary hydroxyl groups Well-balanced ethoxylated chain length Applications Waterborne resins systems (e.g. alkyd, epoxy, polyester, polyurethane) Polyurethane dispersions Hydrophilic PU-systems Surfactants Fibre sizing Cosmetics Chemical building block

Perstorp Ab Trimethylolpropane product card banner

Perstorp AB

Perstorp AB Trimethylolpropane

Applications: Resin Manufacturing, Chemical Manufacturing, Chemical Building Blocks & Intermediates

Product Families: Prepolymers & Polyols, Alcohols, Intermediates

Chemical Family: Alcohols, Polyols (Trifunctional), Triols

End Uses: Resin Manufacturing, Polyurethane Foams, Lubricants Manufacturing

Trimethylolpropane (CAS: 77-99-6) is an intermediate used in saturated polyesters, alkyds, polyurethanes, acrylic acid esters for radiation curing, esters, rosin esters and for surface treatment. Features Three hydroxyl groups White flake material  Applications Paints Coil coatings Synthetic lubricants Radiation curing Pigment coating Coatings and foams

Perstorp Ab 2-ethylhexanoic Acid product card banner

Perstorp AB

Perstorp AB 2-Ethylhexanoic Acid

Applications: Chemical Manufacturing, Chemical Building Blocks & Intermediates, Fluids & Lubricants

Product Families: Surface Protective Additives, Performance Additives, Functional Additives

Chemical Family: Carboxylic Acids & Derivatives

2-Ethylhexanoic Acid (2-EHA) (CAS: 149-57-5) is a corrosion inhibitor and plasticizer used in esters for PVB film plasticizers and synthetic lubricants, and in a variety of applications from automotive coolants to pharmaceuticals. Features One carboxylic group based on a C8 carbon chain Colorless liquid Applications Plasticizers Lubricants Siccatives/paint driers PVC stabilizers PUR catalysts Anti-fungi additives Corrosion inhibition in automotive coolants Processing aid in chemicals and pharmaceuticals

Boltorn™ U3000 product card banner

Perstorp AB

Boltorn™ U3000

Applications: Architectural Coatings

Product Families: Functional Additives

Chemical Family: Dendritic Polymers

End Uses: Waterborne Coating

Boltorn™ U3000 is a  fully fatty acid-modified dendritic polymer with a high concentration of unsaturation. It is used in wood stains and alkyd paints for outdoor applications.  Features Branched structure provides unique flow properties Low VOC Low viscosity Dries raoidly Outdoor durability

Bis-mpa™ product card banner

Perstorp AB

Bis-MPA™

Applications: Resin Manufacturing, Chemical Manufacturing, Chemical Building Blocks & Intermediates

Product Families: Dispersing & Wetting Additives, Organic Acids

Chemical Family: Organic Acids, Carboxylic Acids & Derivatives

End Uses: E-Coat & Electrodeposition, Polyurethane Manufacturing, Polyester Manufacturing

Bis-MPA™, or Dimethylol Propionic Acid (DMPA) (CAS: 4767-03-7), is a versatile hindered diol. It is used as a key building block in polyurethane dispersions (PUD) for coatings and adhesives, chemical syntheses, and in solventborne alkyds and other resin technologies. Benefits Only small amount needed to create stable dispersions Produces excellent water resistance Non-toxic Odor-free Improves adhesive strength Features Trifunctional organic compound of neopentyl structure One tertiary carboxylic and two primary hydroxylic groups Odorless, free-flowing white crystalline solid Essentially non-toxic Air drying Hydrolysis resistance Excellent flexibilityand toughness High gloss Impact resistance Corrosion resistance Applications Polyurethane dispersions Photographic chemicals Printing inks Waterborne alkyds and polyesters Conventional alkyds and polyesters Chemical building block  

Curalite™ Ox product card banner

Perstorp AB

Curalite™ Ox

Applications: Film & Foil Coatings

Product Families: Rheology Modifiers & Stabilizers, Intermediates, Diluents

Chemical Family: Oxetanes, Fatty Acids

Curalite™Ox (CAS: 3047-32-3) is one of the main components of UV/EB cationic formulations as a reactive diluent. It is used in paint and coatings and printing and packaging applications. Benefits Increases through cure and chemical resistance of the formulation Features Increased reactivity Good diluting power Low viscosity Odor free Non-skin irritating Applications Cationic UV printing inks and overprint varnishes for metal and plastic substrates    

Perstorp Ab 2-ethylhexanoic Acid Pro product card banner

Perstorp AB

Perstorp AB 2-Ethylhexanoic Acid Pro

Applications: Chemical Manufacturing, Chemical Building Blocks & Intermediates

Product Families: Intermediates & Precursors, Formulation & Processing Aids, Functional Additives

2-Ethylhexanoic Acid Pro (CAS: 149-57-5) is a pro-enironment carboxylic acid that can be used as an intermediate in CASE ingredients, fluids and lubricants, and pharmaceuticals and nutraceuticals. Benefits Supports sustainable sourcing  Designed to reduce the carbon footprint Based on mass balance concept Third party certified according to the ISCC system* Features Based on 25% renewable resources Ready to be dropped into existing formulations Applications PVB film plasticizers Lubricants Siccatives/paint driers PVC stabilizers PUR catalysts Anti-fungi additives Corrosion inhibitor in coolants Processing aid in chemicals and pharmaceuticals * Traceability back to the country of origin, ensuring the biomass was sourced in a sustainable way, and has a certified mass balance and greenhouse gas (GHG) calculation.

Charmor™ Pro Pm40 C40 product card banner

Perstorp AB

Charmor™ Pro PM40 C40

Applications: EIFS & Insulation, Structural Components, Parking Structures & Stadiums

Product Families: Functional Additives, Performance Additives, Flame Retardants

Chemical Family: Polyols

End Uses: Intumescent Coating, Railway Pads, Railway Insulation Plates

Charmor™ Pro PM40 is a partly renewable micronized pentaerythritol derivative. It is a critical component in the formation of a thick, fire-resistant char barrier for intumescent coatings that are exposed to high temperatures. It can also be used in intumescent systems for plastics as a carbon source for halogen-free systems demanding lower smoke release and non-toxic fumes Benefits Pro-environment polyol ready to be dropped into existing formulations Based on mass balance concept Designed to reduce carbon footprint Supports sustainable sourcing of renewable raw material Third party certified according to the ISCC system* Features Available in two grades, based on 100% and 40% renewable resources Contains four primary hydroxyl groups * Traceability back to the country of origin ensuring the biomass was sourced in a sustainable way as well as a certified mass balance.  

Charmor™ Pm15 product card banner

Perstorp AB

Charmor™ PM15

Applications: EIFS & Insulation, Structural Components, Parking Structures & Stadiums

Product Families: Functional Additives, Performance Additives, Flame Retardants

Chemical Family: Polyols

End Uses: Intumescent Coating, Railway Pads, Railway Insulation Plates

Charmor™ PM15 is a polyhydric alcohol that creates a foam with high expansion factor. It is used for  intumescent coating systems. Benefits Allows customization of the intumescent system performance Provides increased thermal insulation in confined spaces Features Contains four primary hydroxyl groups, milled into small, controlled particles (less than 15 microns)  

Ymer™ N90 product card banner

Perstorp AB

Ymer™ N90

Applications: Resin Manufacturing, Chemical Manufacturing, Chemical Building Blocks & Intermediates

Product Families: Dispersing & Wetting Additives, Diols & Polyols

Chemical Family: Polyethylene Glycols

End Uses: Polyester Manufacturing, Chemicals Production, Surfactant Manufacturing

Ymer™ N90 is a polymeric nonionic dispersing monomer that can be used to disperse polyurethanes, alkyds and polyesters in water. It is used in a range of applications, including flexible and abrasion-resistant formulations for leather and textiles and soft-feel coatings for plastics. Benefits VOC-free Allows fine tuning of specific properties of waterborne polyurethane dispersions Adds softness, stability and flexibility  Features Difunctional polyethylene glycol monomethyl ether Designed with a long ethoxylated chain Contains two primary hydroxyl groups which are incorporated in the polymer White/opaque amorphous material Easily dispersible  Good pH stability Freeze/thaw stability Solvent resistance  

Charmor™ Pm40 product card banner

Perstorp AB

Charmor™ PM40

Applications: EIFS & Insulation, Structural Components, Parking Structures & Stadiums

Product Families: Functional Additives, Performance Additives, Flame Retardants

Chemical Family: Polyols

End Uses: Intumescent Coating, Railway Pads, Railway Insulation Plates

Charmor™ PM40 is a polyhydric alcohol that creates a foam with high expansion factor. It is used for  intumescent coating systems. Benefits Provides a robust and reliable intumescent effect to meet general standards Allows customization of the intumescent system performance Creates a compact stable foam structure Robust properties suitable for turbulent fire conditions Features Contains four primary hydroxyl groups, milled into small, controlled particles (less than 40 microns) Easy to formulate with

Ymer™ N180 product card banner

Perstorp AB

Ymer™ N180

Applications: Resin Manufacturing, Chemical Manufacturing, Floor Coatings

Product Families: Dispersing & Wetting Additives, Diols & Polyols

Chemical Family: Polyethylene Glycols

End Uses: Polyester Manufacturing, Chemicals Production, Surfactant Manufacturing

Ymer™ N180 is a polymeric nonionic dispersing monomer that can be used to disperse polyurethanes, alkyds and polyesters in water. It is used in a range of applications, including durable wood flooring coatings and weather resistant coatings for outdoor surfaces. Benefits Allows fine tuning of specific properties of waterborne polyurethane dispersions Enhances hardness and durability in solvent-free polyurethane dispersions Minimizes the level of harmful amines in production  Reduces the amount of harmful amines in the PUD Improves pigment wetting Features Difunctional polyethylene glycol monomethyl ether Designed with a short ethoxylated chain Contains two primary hydroxyl groups which are incorporated in the polymer White/opaque liquid Easily dispersible  Weather resistance Good pH stability Freeze/thaw stability Solvent resistance