Perstorp AB
Perstorp AB Sodium Formate
Applications: Chemical Manufacturing, Dish Care, Laundry & Fabric Care
Product Families: Organic Salts, Stabilizers
Chemical Family: Formates, Sodium Salts
End Uses: Detergents, Liquid Detergents
Sodium Formate (CAS: 141-53-7) is a high purity organic sodium salt. It can be used as an intermediate for a variety of industrial, manufacturing and HI&I applications. Benefits Non-corrosive Provides excellent performance and environmental benefits Features Monosodium salt of formic acid White crystalline material (also available in liquid versions) High purity (consistent 98% purity vs. industry average 95%) Low-water-content Fully soluble in water Heavy metal free Not classified as hazardous to health or the environment Applications Mineral acids Liquid laundry detergent Pulp and paper Textiles Leather tanning Airport runway de-icers Oil and gas exploration Gycol-free antifreeze Feed acidifier and antimicrobial agent (feed-grade) Heat transfer fluids, specialty lubricants, washing and cleaning products
Perstorp AB
Ymer™ N120
Applications: Chemical Manufacturing, Surface Care, Chemical Building Blocks & Intermediates
Product Families: Diols & Polyols, Monomers, Dispersing & Wetting Additives
Chemical Family: Polyethylene Glycols
End Uses: Waterborne Coating
Ymer™ N120 (CAS: 131483-27-7) is a polymeric nonionic dispersing monomer that can be fine-tuned from hard and rigid to soft and flexible to meet specific properties of dispersions while maintaining stability. Features Contains two primary hydroxyl groups Well-balanced ethoxylated chain length Applications Waterborne resins systems (e.g. alkyd, epoxy, polyester, polyurethane) Polyurethane dispersions Hydrophilic PU-systems Surfactants Fibre sizing Cosmetics Chemical building block
Perstorp AB
Boltorn™ H311
Product Families: Diols & Polyols
Chemical Family: Dendritic Polymers, Polyols
End Uses: Polyurethane Foams, Automotive Seating
Boltorn™ H311 is a dendritic polymer polyol that can be used as an effective load builder for high firmness molded foam and high resilience (HR) slabstock foam, and to replace copolymer polyols of styrene acrylonitrile (SAN)-type or conventional-type crosslinkers. Benefits More efficient than SAN-type polymer polyols in providing compressive loads at given solids level Foam formulations with lower total solids levels Provides exceptionally high FD or CFD loads Increases foam stability and allows for high firmness at low density Features Dendritic polymer polyol with high hydroxyl functionality Highly branched flexible backbone with more than 20 primary hydroxyl groups Contains 10 % water Viscous liquid at room temperature Excellent solubility in polyether polyols, glycols and polyalcohols
Perstorp AB
Perstorp AB Trimethylolpropane
Applications: Resin Manufacturing, Chemical Manufacturing, Chemical Building Blocks & Intermediates
Product Families: Prepolymers & Polyols, Alcohols, Intermediates
Chemical Family: Alcohols, Polyols (Trifunctional), Triols
End Uses: Resin Manufacturing, Polyurethane Foams, Lubricants Manufacturing
Trimethylolpropane (CAS: 77-99-6) is an intermediate used in saturated polyesters, alkyds, polyurethanes, acrylic acid esters for radiation curing, esters, rosin esters and for surface treatment. Features Three hydroxyl groups White flake material Applications Paints Coil coatings Synthetic lubricants Radiation curing Pigment coating Coatings and foams
Perstorp AB
Boltorn™ P500
Product Families: Diols & Polyols
Chemical Family: Polyols (Polyester), Dendritic Polymers
End Uses: Automotive Seating, UV-Curable Acrylic Materials, Polyurethane Foams
Boltorn™ P500 is an intermediate used as a precursor for UV-curing acrylate oligomers and as a cross-linking polymer polyol for flexible polyurethane foams. Features Good balance between hardness and flexibility and reactivity Exceptional relationship between viscosity, molecular weight and functionality Applications Automotive seating Polyurethane foams UV-curable acrylic materials
Perstorp AB
Perstorp AB Phthalic Anhydride
Applications: Chemical Manufacturing, Chemical Building Blocks & Intermediates
Product Families: Other Intermediates
AB Phthalic Anhydride (CAS: 85-44-9) is a biodegradable intermediate used to produce unsaturated polyester resins (UPRs) and alkyd resins for the coatings industry, and as raw material for phthalate PVC plasticizers such as Perstorp's Emoltene™ 100.
Perstorp AB
Perstorp AB Neopentyl Glycol
Applications: Resin Manufacturing
Product Families: Diols & Polyols
Chemical Family: Polyols, Polyglycols
End Uses: Lubricants Manufacturing, Polyurethane Manufacturing, Alkyd Resin Manufacturing
Neopentyl Glycol (CAS: 126-30-7) is an intermediate used in saturated and unsaturated polyesters and esters. Features White flakes Biodegradable Two primary hydroxyl groups Applications Powder coatings, coil coatings and other stoving enamels Gel coats and reinforced plastics Synthetic lubricants
Perstorp AB
Boltorn™ H2004
Product Families: Diols & Polyols
Chemical Family: Dendritic Polymers, Polyols
End Uses: UV-Curable Acrylic Materials
Boltorn™ H2004 is a liquid fatty acid-modified dendritic polymer. It is used as a crosslinker and flexibilizer for cationic UV coatings, inks and adhesives, and as a polymer building block where unique rheology or mechanical properties, high reactivity and good chemical resistance are required. Benefits Offers the general advantages of polyols in cationic systems (improved flexibility and reactivity) Improves chemical resistance and rheological behavior of flexographic inks while maintaining high curing speed Newtonian behavior of printing inks with Boltorn™ H2004 improves ink transfer at high speeds Features Dendritic polymer with high hydroxyl functionality Highly branched flexible backbone with six primary hydroxyl groups. Viscous liquid at room temperature Excellent solubility in glycols, ethers, alcohols, ketones and aromatic solvents
Perstorp AB
Boltorn™ P1000
Product Families: Diols & Polyols
Chemical Family: Dendritic Polymers, Polyols
End Uses: Coatings Manufacturing, Monomer & Oligomer Manufacturing, Printing
Boltorn™ P1000 is a liquid, low viscosity dendritic polyester and polyether blend used as a precursor for UV/EB curable acrylates. Benefits Allows monomer-free formulation The acrylate of Boltorn™ P1000 yields “ready to go“ coatings with excellent reactivity, hardness, flexibility, abrasion resistance, chemical resistance, low water sensitivity and low extractables Features Exceptionally low viscosity and low shrinkage High molecular weight and high reactivity High hydroxyl number Viscous liquid at room temperature End uses UV-digital printing
Perstorp AB
Perstorp AB 2-Ethylhexanol
Applications: Chemical Manufacturing, Fluids & Lubricants, Chemical Building Blocks & Intermediates
Product Families: Performance Additives, Alcohols
Chemical Family: Alcohols
End Uses: Phthalate Manufacturing, Polyacrylate Manufacturing, Ester Manufacturing
2-Ethylhexanol (CAS: 104-76-7) is an intermediate that can be used in the production of dioctyl phthalate, acrylates, 2-ethylhexyl nitrate, special plasticizers, and other applications. Features One primary hydroxyl group Colorless liquid Applications Ester oils (non-vinyl) Herbicides Lubricating oils Manufacturing of phthalate, plasticizers and polyacrylate Mining chemicals Vinyl applications
Perstorp AB
Bis-MPA™
Applications: Resin Manufacturing, Chemical Manufacturing, Chemical Building Blocks & Intermediates
Product Families: Dispersing & Wetting Additives, Organic Acids
Chemical Family: Organic Acids, Carboxylic Acids & Derivatives
End Uses: E-Coat & Electrodeposition, Polyurethane Manufacturing, Polyester Manufacturing
Bis-MPA™, or Dimethylol Propionic Acid (DMPA) (CAS: 4767-03-7), is a versatile hindered diol. It is used as a key building block in polyurethane dispersions (PUD) for coatings and adhesives, chemical syntheses, and in solventborne alkyds and other resin technologies. Benefits Only small amount needed to create stable dispersions Produces excellent water resistance Non-toxic Odor-free Improves adhesive strength Features Trifunctional organic compound of neopentyl structure One tertiary carboxylic and two primary hydroxylic groups Odorless, free-flowing white crystalline solid Essentially non-toxic Air drying Hydrolysis resistance Excellent flexibilityand toughness High gloss Impact resistance Corrosion resistance Applications Polyurethane dispersions Photographic chemicals Printing inks Waterborne alkyds and polyesters Conventional alkyds and polyesters Chemical building block
Perstorp AB
Polyol 3990
Applications: Chemical Manufacturing, Chemical Building Blocks & Intermediates
Product Families: Diols & Polyols
Chemical Family: Polyols (Trifunctional), Polyols
End Uses: Polyurethane Manufacturing
Polyol 3990 is a tri-functional liquid polyol with primary hydroxyl groups. It is used as an intermediate in chemical and industrial manufacturing applications. Applications Chemical building block Precursor for free radical radiation-curing monomers and oligomers Cosslinker in polyurethanes
Perstorp AB
Polyol 4640
Applications: Chemical Manufacturing, Chemical Building Blocks & Intermediates
Product Families: Diols & Polyols
Chemical Family: Polyols (Tetrafunctional), Polyols
End Uses: Polyurethane Manufacturing
Polyol 4640 is a tetrafunctional liquid polyol with primary hydroxyl groups. It is used as an intermediate in industrial and chemical manufacturing applications. Applications Chemical building block Crosslinker in polyurethanes, Precursor for free radical radiation-curing monomers and oligomers
Perstorp AB
Perstorp AB Sodium Formate S Grade
Applications: Exploration & Upstream, Pulping & Processing, Tanning
Product Families: Organic Salts, Stabilizers
Chemical Family: Formates, Sodium Salts
Sodium Formate S Grade (CAS: 141-53-7) is a high-purity organic sodium salt that can be used in a variety of applications (pulp and paper, textiles, leather tanning, airport de-icing, oil and gas exploration, antifreeze). Benefits Provides excellent performance and environmental benefits Features Monosodium salt of formic acid High purity white crystalline material Low water content Fully soluble in water Heavy metal free Not classified as hazardous to health or the environment Applications In the production of sodium hydrosulphite, a reductive bleaching agent for pulp and paper and vat and sulfur-containing dyes, and for the removal of pigments in textiles As a pH-neutralizer in leather tanning formulations to stabilize chromium, resulting in better leather quality, penetration and reduced tanning time As a non-corrosive de-icing agent for airport runways As drilling and stabilizing aids in oil and gas exploration As a glycol-free antifreeze additive
Perstorp AB
Polyol 3611 (low water for PU)
Applications: Chemical Manufacturing, Chemical Building Blocks & Intermediates
Product Families: Diols & Polyols
Chemical Family: Polyols (Trifunctional), Polyols
End Uses: Polyurethane Manufacturing
Polyol 3611 is a tri-functional liquid polyol with primary hydroxyl groups. It is used as an intermediate in polyurethane manufacturing applications. Features Very low water content Applications Chemical building block Crosslinker in polyurethanes
Perstorp AB
Polyol 3610
Applications: Chemical Manufacturing, Chemical Building Blocks & Intermediates
Product Families: Diols & Polyols
Chemical Family: Polyols (Trifunctional), Polyols
End Uses: Polyurethane Manufacturing
Polyol 3610 is a tri-functional liquid polyol with primary hydroxyl groups. It is used as an intermediate in industrial and chemical manufacturing applications. Applications Chemical building block Crosslinker in polyurethanes
Perstorp AB
Polyol 3380
Applications: Chemical Manufacturing, Chemical Building Blocks & Intermediates
Product Families: Diols & Polyols
Chemical Family: Polyols (Trifunctional), Polyols
End Uses: Polyurethane Manufacturing
Polyol 3380 is a tri-functional liquid polyol with primary hydroxy groups. It is used as an intermediate in polyurethane manufacturing. Applications Chemical building block Crosslinker in polyurethanes
Perstorp AB
Polyol 3165
Applications: Chemical Manufacturing, Chemical Building Blocks & Intermediates
Product Families: Diols & Polyols
Chemical Family: Polyols (Trifunctional), Polyols
End Uses: Polyurethane Manufacturing
Polyol 3165 is a tri-functional liquid polyol with primary hydroxy groups. It is used as an intermediate in polyurethane manufacturing. Applications Chemical building block Crosslinker in polyurethanes
Perstorp AB
Ymer™ N90
Applications: Resin Manufacturing, Chemical Manufacturing, Chemical Building Blocks & Intermediates
Product Families: Dispersing & Wetting Additives, Diols & Polyols
Chemical Family: Polyethylene Glycols
End Uses: Polyester Manufacturing, Chemicals Production, Surfactant Manufacturing
Ymer™ N90 is a polymeric nonionic dispersing monomer that can be used to disperse polyurethanes, alkyds and polyesters in water. It is used in a range of applications, including flexible and abrasion-resistant formulations for leather and textiles and soft-feel coatings for plastics. Benefits VOC-free Allows fine tuning of specific properties of waterborne polyurethane dispersions Adds softness, stability and flexibility Features Difunctional polyethylene glycol monomethyl ether Designed with a long ethoxylated chain Contains two primary hydroxyl groups which are incorporated in the polymer White/opaque amorphous material Easily dispersible Good pH stability Freeze/thaw stability Solvent resistance
Perstorp AB
Polyol 4290
Applications: Chemical Manufacturing, Chemical Building Blocks & Intermediates
Product Families: Diols & Polyols
Chemical Family: Polyols (Tetrafunctional), Polyols
End Uses: Polyurethane Manufacturing
Polyol 4290 is a tetra-functional liquid polyol with primary hydroxy groups. It is used as an intermediate in chemical and industrial manufacturing applications and in polyurethane manufacturing. Applications Chemical building block Crosslinker in polyurethanes Precursor for free radical radiation-curing monomers and oligomers
Perstorp AB
Ymer™ N180
Applications: Resin Manufacturing, Chemical Manufacturing, Floor Coatings
Product Families: Dispersing & Wetting Additives, Diols & Polyols
Chemical Family: Polyethylene Glycols
End Uses: Polyester Manufacturing, Chemicals Production, Surfactant Manufacturing
Ymer™ N180 is a polymeric nonionic dispersing monomer that can be used to disperse polyurethanes, alkyds and polyesters in water. It is used in a range of applications, including durable wood flooring coatings and weather resistant coatings for outdoor surfaces. Benefits Allows fine tuning of specific properties of waterborne polyurethane dispersions Enhances hardness and durability in solvent-free polyurethane dispersions Minimizes the level of harmful amines in production Reduces the amount of harmful amines in the PUD Improves pigment wetting Features Difunctional polyethylene glycol monomethyl ether Designed with a short ethoxylated chain Contains two primary hydroxyl groups which are incorporated in the polymer White/opaque liquid Easily dispersible Weather resistance Good pH stability Freeze/thaw stability Solvent resistance
Perstorp AB
Perstorp AB Isononanoic Acid
Applications: Chemical Manufacturing, Resin Manufacturing, Fluids & Lubricants
Product Families: Surface Protective Additives, Organic Acids
Chemical Family: Organic Acids, Carboxylic Acids & Derivatives
End Uses: Industrial Lubricants, Synthetic Lubricants, Alkyd Resin Manufacturing
The branched Isononanoic Acid from Perstorp is a high purity building block for formulations with specific performance requirements. As a base stock, it is used in engineered fluids of more environmental-friendly refrigerant technologies or top performing aviation turbine oils.Isononanoic acid (CAS: 3302-10-1) is a critical carboxylic acid intermediate. It is used in the production of polyol ester based synthetic lubricants for refrigeration or aviation. The high and consistent purity of the product provides precise and reliable attributes to the applications.Isononanoic acid is also used as a corrosion inhibitor in industrial fluids and coolants; as a monomer in the synthesis of alkyd resins for stoving enamels and two-component paints. Other Applications for Isononanoic acid include paint driers and acid chlorides.
Perstorp AB
Polyol 4360
Applications: Chemical Manufacturing, Chemical Building Blocks & Intermediates
Product Families: Diols & Polyols
Chemical Family: Polyols (Tetrafunctional), Polyols
End Uses: Polyurethane Manufacturing
Polyol 4360 is a tetra-functional liquid polyol with secondary hydroxyl groups. It is used as an intermediate in chemical and industrial manufacturing applications and in polyurethane manufacturing. Applications Chemical building block Crosslinker in polyurethanes Precursor for free radical radiation-curing monomers and oligomers
Perstorp AB
Polyol 4525
Applications: Chemical Manufacturing, Chemical Building Blocks & Intermediates
Product Families: Diols & Polyols
Chemical Family: Polyols (Tetrafunctional), Polyols
End Uses: Polyurethane Manufacturing
Polyol 4525 is a tetra-functional liquid polyol with secondary hydroxy groups. It is used as an intermediate in chemical and industrial manufacturing applications and in polyurethane manufacturing. Applications Chemical building block Crosslinker in polyurethanes Precursor for free radical radiation-curing monomers and oligomers