Company logo
product
Calfoam® ES-701 10 MAX
Search:

Calfoam® ES-701 10 MAX

Calfoam® ES-701 10 MAX is a 70% active solution of sodium lauryl ether sulfate that contains one mole of ethylene oxide with a 1,4-Dioxane level below 10ppm. Calfoam® ES-701 10 MAX is an anionic surfactant produced by continuous sulfation of a vegetable derived fatty alcohol ethoxylate.
Product Resources

Knowde Enhanced TDS

Expand All

+

Identification & Functionality

+

Features & Benefits

+
Origin
Vegetal Origin
Advantages

The high activity of Calfoam® ES-701 10 MAX offers economical storage of sodium laureth sulfate. Calfoam® ES-701 10 MAX is a high purity, low salt and low color sodium laureth sulfate that offers excellent flash foaming, foam stability, air entrainment, detergency, and mildness. Calfoam® ES-701 10 MAX does not contain a diluent alcohol, important for formulas that require the absence of a solvent. Calfoam® ES-701 10 MAX is more soluble and has slightly higher cleansing properties than either two mole or three mole ether sulfates. Calfoam® ES-701 10 MAX is derived from renewable natural vegetable resources.

Applications & Uses

+
Recommended Uses & Known Applications

Calfoam® ES-701 10 MAX is an anionic surfactant that provides luxurious, mild and copious foam that is gentle to the skin and is perfect for personal care and HI&I formulations. Calfoam® ES-701 10 MAX has a 1,4-Dioxane level of below 10ppm to enable formulations to meet the New York state end use product regulations. Calfoam® ES-701 10 MAX is a great flash foamer, creates very dense foam and performs well under a range of conditions in formulations when used alone or in combination with other surfactants. Calfoam® ES-701 10 MAX has a high tolerance for pH increases and is relatively unaffected by changing water hardness, which enables many industrial cleaner formulations to benefit from using this surfactant. Calfoam® ES-701 10 MAX is perfect for bubble bath, shampoo, shower gel, facial cleanser, liquid hand cleaner, fabric care, hand dish wash, and car care products.

Properties

+
Ingredient Origin
Physical Form
Typical Properties
ValueUnitsTest Method / Conditions
1,4-Dioxane Contentmax. 10ppm-
Active Content68 - 72Wt.%-
pH (4% Solution)max. 8.5--
Sodium Chloride Contentmax. 0.1Wt.%-
Sodium Sulfate Contentmax. 1.0Wt.%-
Specific Gravity1.08--
Unsulfated Material Contentmax. 2.0Wt.%-
Physical Form
Liquid
Odor
Mild
Appearance
Colorless to Pale Yellow

Regulatory & Compliance

+

Packaging & Availability

+
Packaging Information

Calfoam® ES-701 10 MAX is available in 55-gallon polyethylene drums (net weight 480lb/218kg)

Storage & Handling

+
Shelf Life
1 Year
Storage and Handling

Employ normal safety precautions (i.e. gloves and safety goggles) when handling Calfoam® ES-701 10 MAX. Wash thoroughly after handling. Do not get in eyes, avoid skin and clothing contact. Material is slippery on wet and hard surfaces. Ensure adequate ventilation when handling. Store Calfoam® ES-701 10 MAX between 60 - 100°F using a low temperature heating media (105°F water) to maintain product fluidity. Avoid excessive heat and do not utilize steam. Do not store with strong oxidizing agents. Store in plastic or plastic lined steel, tightly closed containers. Refer to the Safety Data Sheet before handling.

Documents (3)

Document Name
Type
Products
Technical Data Sheet
Calfoam® ES-701 10 MAX
Technical Data Sheet
Products: Calfoam® ES-701 10 MAX
Brochure
Calfoam® SLS-30, Calsoft® AOS-40, Calfoam® ES-701 10 MAX, Calfoam® ES-702 10 MAX
Brochure
Products: Calfoam® SLS-30, Calsoft® AOS-40, Calfoam® ES-701 10 MAX, Calfoam® ES-702 10 MAX
Safety Data Sheet
Calfoam® ES-701 10 MAX
Safety Data Sheet
Products: Calfoam® ES-701 10 MAX