Company logo

Poly-Smith PTFE 55 BRR 5 Moly-LF

Sold by Poly-Smith PTFE
Supplier:  Poly-Smith PTFE
Polymer Name: Polytetrafluoroethylene (PTFE)
Fillers Included: Molybdenum Disulfide, Bronze
Start Order
Secure
Order Quantity
Price
Available upon quote
Minimum Order Quantity
Quote required
Lead Time
Quote required
Available Incoterms
Quote required
Regional Availability
Quote required

Ask Poly-Smith PTFE Questions

DM

Ask the Supplier

DM
TypeDocument Name
Technical Data Sheet
Poly-Smith PTFE 55 BRR 5 Moly - 55% Bronze / 5% Moly Filled PTFE Resin Technical Data Sheet
Poly-Smith PTFE 55 BRR 5 Moly - 55% Bronze / 5% Moly Filled PTFE Resin Technical Data Sheet
Technical Data Sheet
Safety Data Sheet
Poly-Smith PTFE 55 BRR 5 Moly - 55% Bronze / 5% Moly Filled PTFE Resin Safety Data Sheet
Poly-Smith PTFE 55 BRR 5 Moly - 55% Bronze / 5% Moly Filled PTFE Resin Safety Data Sheet
Safety Data Sheet
Brochure
Poly-Smith Material Guide
Poly-Smith Material Guide
Brochure

Knowde Enhanced TDS

Expand All

+

Identification & Functionality

Composition by Weight % and Filler Description
  • 40% Virgin PTFE
  • 55% ± 2.0% Bronze
  • 5% ± 0.5% Moly Disulfide MoS₂

Poly-Smith PTFE 55 BRR 5 Moly-LF Features & Benefits

Product Highlights
  • Bronze filler offers better dimensional stability, higher thermal conductivity, lower creep and cold flow. It also provides improved hardness, lower wear, and a higher comprehensive strength.
  • Molybdenum Disulfide filler is used frequently in combination with others to increase surface hardness, stiffness, and to reduce the starting coefficient of friction and steady-state wear. Its effect on electrical and chemical properties is negligible.
Benefits
  • This compound has high temperature stability and high pressure resistance
  • It has reduced cold flow
  • The MoS₂ content reduces friction and abrasion
  • Properties

    Physical Form
    Mechanical Properties
    ValueUnitsTest Method / Conditions
    Tensile Strength (Cross Direction)15MpaASTM D 4745
    Elongation (Cross Direction)min. 80%ASTM D 4745
    Specific Gravity3.50 - 4.00-ASTM D 4745
    Diametric Shrinkage0.7 - 1.9%ASTM D 4745
    Hardness63 - 73Shore DASTM D 2240
    Bulk Density1100 - 1500g/lASTM D 4745
    Processing Parameters
    ValueUnitsTest Method / Conditions
    Maximum Sintering Temperature370ºC-
    Recommended Mold Pressure35Mpa-

    Regulatory & Compliance

    Quality Standards

    Safety & Health

    Warning

    This product is a fluoropolymer so normal precautions should be followed.

    Poly-Smith PTFE 55 BRR 5 Moly-LF
    Poly-Smith PTFE