Poly-Smith PTFE CMG-115 - Premium Compression Molding Grade PTFE Resin

CMG 115 PTFE is a premium compression molding grade ptfe resin composition by weight % and filler description of 100% Compression Molding Grade Virgin PTFE. Poly-smith is supplier of PTFE in Compression Molding, Blending, Free Flow, and Pre-Sintered grades. We also offer all filled granular compounds, in Low Flow, Free Flow, and Pre-Sintered forms, as well as Reprocessed PTFE. We only source the finest grades of PTFE from ISO Certified Suppliers both worldwide and domestically. You can be confident that we can and will supply the exact material needed for your specific application.

Polymer Name: Polytetrafluoroethylene (PTFE)

Processing Methods: Compression Molding

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Chemical Family
Plastics & Elastomers Functions
Technologies
Composition by Weight % and Filler Description

100% Compression Molding Grade Virgin PTFE

Features & Benefits

Labeling Claims

Applications & Uses

Plastics & Elastomers End Uses
Plastics & Elastomers Processing Methods
General Applications

This grade can be used to fabricate but not limited to billets, film and sheet. When molded into a billet, CMG-Fine can be skeived to 1mil or greater film thickness.

Properties

Physical Form
Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Strength (Cross Direction)min. 30MpaASTM D 4894
Elongation (Cross Direction)min. 320%ASTM D 4894
Specific Gravity2.14 - 2.18ASTM D 4894
Dielectric Strength120KV/0.1 mmASTM D 4894
Bulk Densitymin. 500g/lASTM D 4894
Hardness54 - 62Shore DASTM D 2240
Diametric Shrinkage2 - 3%ASTM D 4894
Average Particle Size115μmPoly-Smith
Processing Parameters
ValueUnitsTest Method / Conditions
Maximum Sintering Temperature370ºC
Recommended Mold Pressure25Mpa

Regulatory & Compliance

Quality Standards