Poly-Smith PTFE CMG-2 - Compression Molding Grade PTFE Resin

CMG-2 PTFE is a compression molding grade ptfe resin composition by weight % and filler description of 100% Compression Molding Grade Virgin PTFE. Poly-smith is supplier of PTFE in Compression Molding, Blending, Free Flow, and Pre-Sintered grades. We also offer all filled granular compounds, in Low Flow, Free Flow, and Pre-Sintered forms, as well as Reprocessed PTFE. We only source the finest grades of PTFE from ISO Certified Suppliers both worldwide and domestically. You can be confident that we can and will supply the exact material needed for your specific application.

Polymer Name: Polytetrafluoroethylene (PTFE)

Processing Methods: Compression Molding

Technical Data Sheet

Similar Products

  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family
Plastics & Elastomers Functions
Technologies
Composition by Weight % and Filler Description

100% Compression Molding Grade Virgin PTFE

Features & Benefits

Labeling Claims

Applications & Uses

Plastics & Elastomers End Uses
Plastics & Elastomers Processing Methods
General Applications

This grade can be used in molds to fabricate parts including, but not limited to, seals, bearings, rings, film, and sheet.

Properties

Physical Form
Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Strength (Cross Direction)min. 26MpaASTM D 4894
Elongation (Cross Direction)min. 250%ASTM D 4894
Specific Gravity2.14 - 2.18ASTM D 4894
Bulk Density500g/lASTM D 4894
Hardness55 - 61Shore DASTM D 2240
Diametric Shrinkage2 - 4%ASTM D 4894
Average Particle Size120μmPoly-Smith
Processing Parameters
ValueUnitsTest Method / Conditions
Maximum Sintering Temperature370ºC
Recommended Mold Pressure30 - 35Mpa

Regulatory & Compliance

Quality Standards