Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Composition by Weight % and Filler Description
100% Modified Virgin PTFE
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- General Applications
This grade is suitable for use in Isostatic, Automatic, and Standard molding practices to fabricate parts including, but not limited to, seals, bearings, thin wall molding and sheet.
Properties
- Mechanical Properties
- Processing Parameters
| Value | Units | Test Method / Conditions | |
| Tensile Strength (Cross Direction) | min. 28 | Mpa | ASTM D 4894 |
| Elongation (Cross Direction) | 400 | % | ASTM D 4894 |
| Initial Melt Point | 332 - 352 | ºC | ASTM D 2240 |
| Specific Gravity | 2.13 - 2.19 | — | ASTM D 4894 |
| Bulk Density | 750 | g/l | ASTM D 4894 |
| Diametric Shrinkage | 2.7 - 3.7 | % | ASTM D 4894 |
| Flow | 3 | sec/50g | Poly-Smith |
| Average Particle Size | 500 | μm | Poly-Smith |
| Value | Units | Test Method / Conditions | |
| Maximum Sintering Temperature | 370 | ºC | — |
| Recommended Mold Pressure | 30 - 35 | Mpa | — |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
Safety & Health
- Warning
This product is a fluoropolymer so precautions should be followed.