Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
Polynt Group
All Polynt Group
Search products
Matching Product Categories
Composite Materials
Markets
Labeling Claims
Physical Form
All Filters
122 Products found on Polynt Group
Most Viewed
TDS
With TDS
POLYCOR® ISO BR WHITE 9199
Chemical Family:
Isophthalics
Functions:
Surface Finish
Color:
Transparent, Custom, Off White, White
Features:
Good Mechanical Properties, Improved Mechanical Properties
POLYCOR® ISO BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.
IMEDGE® ECT120 Colors
Functions:
Surface Finish
Features:
Good Color Stability
Imedge® ECT120 Colors - epoxy compatible technology; MACT compliant gel coat for in-mold use with epoxy resin matrix laminates; deep, dark, rich Colors and high gloss parts; excellent color and gloss recovery after sanding and buffing; excellent scratch and wear resistance; resistance to porosity. Main applications areas are aeolian, textile industry etc.
ARMORFLEX® 953
Functions:
Surface Finish
End Uses:
Tanks, Pipes
Color:
White
Features:
Chemical Resistant, Chemical Resistance
Polynt Composites’ ArmorFlex® 953 Series gel coats are high performance products formulated for the fiberglass industry. They are primarily formulated for marine and sanitary applications,but should be used in any application where water and chemical resistance are needed. ArmorFlex® 953 Series also have exceptional gloss and buffing characteristics. While offering these benefits,the ArmorFlex® 953 Series gel coats have retained the important construction application qualities expected from Polynt Composites gel coats,such as resistance to porosity,tearing,and color separation; sag resistance; consistent liquid properties; excellent patchability; and more. These all add up to higher quality appeal in FRP parts made from Polynt’s ArmorFlex® HIGH GLOSS BUFFBACK® gel coats. ArmorFlex® 953 Series gel coats have enabled customers to meet and surpass all requirements of the American National Standard for plastic bathtubs,shower receptors and shower stalls,ANSI Z124.1,.2 and .3 –1995,Sec. 6.1.1. Gel coats in the 953 Series require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. ArmorFlex® HIGH GLOSS BUFFBACK® gel coats are available in the same wide range of colors as other POLYCOR® gel coats. Refer to Polynt’s POLYCOR® Color Card for color selection. Standard base white ArmorFlex® is 953WJ340.
POLYCOR® FIREBLOCK 2335 PA WHITE 9199
Functions:
Surface Finish
Color:
White
Features:
Flame Retardant
Polycor® Fireblock 2335 PA White 9199 - intumescent fire retardant properties that conforms to EN 45545 for internal panels in conjunction with fireblock resin systems. Main applications areas are aeronautical, railway sector etc.
ARMORCOTE® SP
Chemical Family:
Isophthalics, Unsaturated Polyester (UPE)
Functions:
Surface Finish
Features:
Good UV Protection, Chemical Resistant, Chemical Resistance, UV Protection, Flame Retardant
ARMORCOTE® SP - Light stabilized accelerated isophthalic gel coat base with medium reactivity and superior weather resistance.
Polynt Group 54X
Functions:
Surface Finish
Color:
Off White, White
Polynt Group 54X series gelcoat are formulated with a particular mix of polyester resins, for use in applications where sun exposure and weather conditions are a factor. They are suitable for boats, truck cabs, water slides and environments with humidity and direct sun exposure. This unique formulation is easier and quicker gloss recovery with less buffing time to achieve gloss.
POLYCOR® ISO BR
Chemical Family:
Isophthalics
Functions:
Surface Finish
Color:
White
Features:
Good UV Protection, Chemical Resistant, Chemical Resistance, UV Protection, Flame Retardant
POLYCOR® ISO BR - Light stabilized accelerated isophthalic gel coat base with medium reactivity.It is used in general purpose applications,marine,sanitary,etc…
POLYCOR® ISO PA WHITE 9199
Chemical Family:
Isophthalics
Functions:
Surface Finish
Color:
Transparent, Custom, Off White, White
Features:
Good Mechanical Properties, Improved Mechanical Properties
POLYCOR® ISO PA WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.
ARMORFLEX® 99F
Functions:
Surface Finish
End Uses:
Tanks, Pipes
Color:
White
Features:
Good UV Protection, UV Protection
ArmorFlex® 99F gel coats are advanced technology polyesters that have been formulated for the fiberglass industry. ArmorFlex® 99F gel coats have lower volatile organic compounds (VOC’s) than standard gel coats.
POLYCOR® TOOLING PA CLEAR 0200
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Functions:
Surface Finish
Color:
Orange, Black, Green
Features:
Chemical Resistant, High Impact Resistance, Chemical Resistance, Flame Retardant
POLYCOR® TOOLING PA CLEAR 0200 - A pre-accelerated gel coat base on unsaturated polyester resin. It is cured using MEKP peroxide.This product is recommended for mold manufacturing process and provide durable surfaces to withstand the repeated moldings of GRP laminates.
POLYCOR® LSC NPG BR WHITE 9199
Chemical Family:
Diols, Isophthalics, Glycols, Polyesters, Unsaturated Polyester (UPE)
Functions:
Surface Finish
Color:
Custom, Off White, White
POLYCOR® LSC NPG BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed.
POLYCOR® 944
Chemical Family:
Isophthalics
Functions:
Surface Finish
Features:
Chemical Resistant, Chemical Resistance, Flame Retardant
POLYCOR® 944 - Light stabilized accelerated isophthalic gel coat base with medium reactivity.
Polynt Group 10
Chemical Family:
Unsaturated Polyester (UPE), Polyesters
Functions:
Surface Finish
End Uses:
Tanks, Pipes
Polynt Group 10 - Dispersion of high quality pigments in a monomer-free reactive polyester grinding vehicle
POLYCOR® NPG Sanitary PA WHITE 9199
Chemical Family:
Diols, Glycols, Polyesters, Unsaturated Polyester (UPE)
Functions:
Surface Finish
Color:
White
Features:
Good UV Protection, UV Protection
Polycor® NPG Sanitary PA White 9199 - high reactivity NPG based gel coat offering high resistance to porosity, chemical stain resistance and very good UV resistance. Available in White and off White shades. It is generally used in mass transports applicatons.
STYPOL® 040-4950
Chemical Family:
Diols, Isophthalics, Glycols, Polyesters, Unsaturated Polyester (UPE)
Functions:
Surface Finish
Features:
Good UV Protection, Chemical Resistant, Chemical Resistance, Good Color Stability, UV Protection
STYPOL® 040-4950,040-4954,040-4956 and 040-4965 are clear MACT compliant NPG isophthalic gel coats. They have been designed for use in the manufacturing of cultured marble,onyx,and granite.
POLYCOR® 947 NEUTRAL BASE
Functions:
Surface Finish
Color:
Off White, White
Polycor® 947 Neutral Base have been developed for the fiberglass industry where reduced burn characteristics are needed. When properly applied, 947 series gel coats will meet ul 94v-0 requirements. Sfp gel coats are formulated with a brominated polyester resin system. Federal, state or local regulations may limit their use in certain applications. Check with the appropriate governing agency. Since the flame properties of sfp gel coats in the cured state will vary depending on catalyzation, ultimate cure, and the laminating materials used, it is suggested that the user submit samples of the entire composite for testing by an independent lab. Polynt’s 947 series gel coats are designed for interior, non-water immersion service only. Because these gel coats are formulated with a brominated polyester resin, they do not have good resistance to UV and/or water attack. These gel coats are ready to use, easy to spray, sag resistant, fast curing and require only the addition of the proper amount of an appropriate methyl ethyl ketone peroxide to cure. Sfp's are available in many visually appealing colors. Certain custom color matching is available on request.
POLYCOR® TOP COAT BR WHITE 9199
Functions:
Surface Finish
Color:
Transparent, Custom, Off White, White
Features:
Good Mechanical Properties, Improved Mechanical Properties
POLYCOR® TOP COAT BR WHITE 9199 - A pre-accelerated top coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This TOP COAT product is formulated to be applied to the back surface of laminates to provide a tack free surface finish. It should not be used as a gel coat. This topcoat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.
POLYCOR® 998 NEUTRAL BASE
Functions:
Surface Finish
Color:
Custom
Features:
Excellent Toughness, High Toughness
Polycor® 998 Neutral Base enamels are formulated to be used as topcoats on fiberglass laminates. Enamels are very similar to gel coats except they cure tack-free on the open surface. Enamels are used to seal and hide a substrate. Normally they are used as interior finishes and yield a pigmented surface. Polycor® 998 series enamels were primarily developed for marine applications; however, they can be used in any FRP application where high performance characteristics are desired. Polycor® 998 series enamels produce a hard, tough, durable coating that reduces maintenance on composites parts. Polycor® 998 series enamels cure to a flat finish. Standard enamels should not be used for water immersion service due to potential water spotting and water blistering. Contact a sales representative for a recommendation if water immersion is required. Polycor® 998 series enamels meet the EPA national emission standards for hazardous air pollutants NESHAP for both marine manufacturing and reinforced composites production. Polycor® 998 series enamels contain wax. The wax is essential to yielding a tack-free surface in the top coating application. The wax also helps to suppress the volatile organic compounds emitted in to the air. Together the low VOC or hap content and wax results in:reduced monomer emissionsless odorsmoother sprayed film less orange peel less overspray due to the wax, Polycor® 998 series enamels should not be used as an in-mold coating where they will be backed by laminate or other materials. Delamination could occur. Enamels require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. These enamels are available in White or any of the Colors listed in the standard gel coat color card. Special Colors are available upon request.
POLYCOR® GS-H
Functions:
Surface Finish
Features:
Good Color Stability
Polycor® GS-H - pre-accelerated, neutral color, thixotropic isophthalic modified gelcoat. Good color stability. Good filler and pigment wettability. Recommended for hand lay-up application. Main applications areas are automotive, marine etc.
POLYCOR® 948 BASE WHITE
Functions:
Surface Finish
Color:
White
Features:
High Durability
Polycor® 948 Base White series enamels are formulated to be used as topcoats on fiberglass laminates such as boat and camper shell interiors. Normally enamels are used as interior finishes or to cover a laminate to provide a colored surface. Polycor® 948 series enamels are available in White or any of the Colors listed in the standard color gel coat color deck. Special Colors are available upon request. They can be made from an isophthalic or iso/npg base resin. Consult a polynt composites sales representative to find out more about a particular product.
POLYCOR® 948 Colors
Functions:
Surface Finish
Polycor® 948 Colors - enamel gel coat formulated to be used as topcoat on fiberglass laminates cures tack-free. Hard, durable finishes with good water resistance. Available in sprayable or brushable versions. Main applications areas are aeolian, marine, textile industry etc.
POLYCOR® TOOLING BR CLEAR 0200
Chemical Family:
Polyesters, Unsaturated Polyester (UPE)
Functions:
Surface Finish
Color:
Orange, Black, Green
Features:
Chemical Resistant, High Impact Resistance, Chemical Resistance, Flame Retardant
POLYCOR® TOOLING BR CLEAR 0200 - A pre-accelerated gel coat base on unsaturated polyester resin. It is cured using MEKP peroxide.This product is recommended for mold manufacturing process and provide durable surfaces to withstand the repeated moldings of GRP laminates.
Polynt Group 55, 55X
Functions:
Surface Finish
End Uses:
Pipes, Tanks
Polynt Group 55, 55X is designed for interior application; meets particular flame-retardant requirements; not recommended for parts used under direct sun exposure or prolonged water immersion. It is generally used in composites applicatons.
POLYCOR® 943 BASE WHITE
Chemical Family:
Diols, Isophthalics, Glycols, Polyesters, Unsaturated Polyester (UPE)
Functions:
Surface Finish
Color:
White
Features:
Chemical Resistant, Chemical Resistance, High Durability
Polycor® 943 Base White products are high performance gel coats formulated for use in sanitary and marine applications or any FRP application where resistance to water and blistering are needed. Use of Polycor® 943 gel coats has enabled customers to meet and surpass all requirements of the American national standard for plastic bath tubs, shower receptors and shower stalls, ANSI Z124.1, .2 and .3 1995, sec. 6.1.1. These gel coats are ready to use, easy to spray, sag resistant, fast curing and require only the addition of the proper amount of an appropriate methyl ethyl ketone peroxide to cure. Polycor® 943 gel coats are available in whites and a wide range of colors.
POLYCOR® TOOLING VE BR NEUTRAL 0000
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives, Vinyl Esters
Functions:
Surface Finish
Color:
Orange, Black, Green
Features:
Chemical Resistant, Chemical Resistance, Flame Retardant
Polycor® Tooling VE BR Neutral 0000 - speciality vinyl ester based gel coat formulated to provide our highest level of heat resistance. A high gloss durable surface, resilient to the repeated molding cycles of composite production. High levels of styrene and chemical resistance.
POLYCOR® 998 BASE WHITE
Functions:
Surface Finish
Color:
White
Features:
Excellent Toughness, High Toughness
Polycor® 998 Base White series enamels are formulated to be used as topcoats on fiberglass laminates. Enamels are very similar to gel coats except they cure tack-free on the open surface. Enamels are used to seal and hide a substrate. Normally they are used as interior finishes and yield a pigmented surface. Polycor® 998 series enamels were primarily developed for marine applications; however, they can be used in any FRP application where high performance characteristics are desired. Polycor® 998 series enamels produce a hard, tough, durable coating that reduces maintenance on composites parts. Polycor® 998 series enamels cure to a flat finish. Standard enamels should not be used for water immersion service due to potential water spotting and water blistering. Contact a sales representative for a recommendation if water immersion is required. Polycor® 998 series enamels meet the EPA national emission standards for hazardous air pollutants NESHAP for both marine manufacturing and reinforced composites production. Polycor® 998 series enamels contain wax. The wax is essential to yielding a tack-free surface in the top coating application. The wax also helps to suppress the volatile organic compounds emitted in to the air. Together the low VOC or hap content and wax results in:reduced monomer emissionsless odorsmoother sprayed film less orange peel less overspray due to the wax, Polycor® 998 series enamels should not be used as an in-mold coating where they will be backed by laminate or other materials. Delamination could occur. Enamels require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. These enamels are available in White or any of the Colors listed in the standard gel coat color card. Special Colors are available upon request.
BATHCOTE® 992 NEUTRAL BASE
Functions:
Surface Finish
Bathcote® 992 Neutral Base gel coats are high performance products formulated for the sanitary-ware industries. These gel coats have low volatile organic compound properties. Bathcote® gel coats meet the EPA national emission standards for hazardous air pollutants NESHAP : reinforced composites construction. While offering these benefits, polynt composites gel coats have retained the important construction application qualities customers have come to expect from polynt composites gel coats, such as resistance to porosity, tearing, and color separation; sag resistance; consistent liquid properties; good patchability; and more. These all add up to higher quality appeal in FRP parts made from polynt composites' 992 series gel coats. The bathcote® 992 series resist blistering because they are formulated to provide high performance against water and certain chemicals. These gel coats were primarily developed for sanitary applications. These gel coats provide durable, reduced maintenance products. Polynt composites gel coats have enabled customers to meet and surpass all requirements of the American national standard for plastic bathtubs, shower receptors and shower stalls, IAPMO/ANSI Z124.1 .2 -2005, section 6.1. This product series has received certification from the canadian standards association CSA and is eligible to bear the CSA trademark. These gel coats require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure.
POLYCOR® ISO NPG BR WHITE 9199
Chemical Family:
Glycols, Polyesters, Unsaturated Polyester (UPE), Diols, Isophthalics
Functions:
Surface Finish
Color:
Transparent, Custom, Off White, White
Features:
Good Mechanical Properties, Improved Mechanical Properties
POLYCOR® ISO NPG BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed
POLYCOR® TOP COAT PA WHITE 9199
Functions:
Surface Finish
Color:
Transparent, Custom, Off White, White
Features:
Good Mechanical Properties, Improved Mechanical Properties
POLYCOR® TOP COAT PA WHITE 9199 - A pre-accelerated top coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This TOP COAT product is formulated to be applied to the back surface of laminates to provide a tack free surface finish. It should not be used as a gel coat. This topcoat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.
POLYCOR® 945 NEUTRAL BASE
Functions:
Surface Finish
Features:
High Durability
Polycor® 945 Neutral Base - polyester and vinyl ester tooling gel coats. Formulated specifically for mold making. High gloss and hard, durable surfaces. It is generally used in textile industry applicatons.
ARMORFLEX® 99F PA 9199
Chemical Family:
Diols, Isophthalics, Glycols, Polyesters, Unsaturated Polyester (UPE)
Functions:
Surface Finish
Color:
White
Features:
High Impact Resistance
ARMORFLEX® 99F PA 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.In conjunction with vinyl ester barrier coats or skin coats will provide a durable osmotic resistant composite suitable for marine hulls.
EPOVIA ORTHO BR
Chemical Family:
Unsaturated Polyester (UPE), Orthophthalics
Functions:
Surface Finish
Color:
White
EPOVIA ORTHO BR - Orthophthalic,good workability,available in a range of white and or color. Main Applications areas are Agrochemical,Agrobusiness,Solvents etc.
POLYCOR® 969 BASE WHITE
Functions:
Surface Finish
Color:
White
Polycor® 969 Base White sanding gel coats have been specifically formulated for use as a sanding substrate. Sanding gel coats are used for FRP parts that will be subsequently painted. They can be used for room temperature and heated molding rtm applications. These products can be post baked at temperatures up to 285°f for as long as two hours. They may also be used for utility, noncritical exterior applications. They are not intended Nor should they be used as a surface coat for the marine, tub/shower or swimming pool industries. They should not be used for water immersion service boat hull, swimming pool, spa, water tank, etc. , even if/when painted. Polycor® 969 series sanding gel coats meet the EPA national emission standards for hazardous air pollutants NESHAP : reinforced composites production. Some versions in the Polycor® 969 series are formulated to meet south coast air quality management district SCAQMD rule 1162.
ARMORGUARD® 967 BLACK
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives, Vinyl Esters
Functions:
Surface Finish
Color:
White
Armorguard® 967 Black have been formulated as barrier coats to reduce osmotic blistering, and as print blockers, to provide a smoother gel coat finish.
POLYCOR® 949 NEUTRAL BASE
Functions:
Surface Finish
Color:
White
Polycor® 949 Neutral Base sanding gel coats have been specifically formulated for use as a sanding substrate. Sanding gel coats are used for FRP parts that will be subsequently painted. They can be used for room temperature and heated molding rtm applications. Customer experiences have proven that these products can be post-baked at temperatures up to 285°f for as long as two hours. They may also be used for utility, noncritical exterior applications. They are not intended Nor should they be used as a surface coat for the marine, tub/shower or swimming pool industries. They should not be used for water immersion service boat hull, swimming pool, spa, water tank, etc. , even if/when painted.
POLYCOR® 945 TOOLING
Functions:
Surface Finish
End Uses:
Tanks, Pipes
Features:
High Durability
Polycor® 945 Tooling polyester tooling gel coats provide durable surfaces to withstand the repeated moldings of FRP laminates. It is generally used in composites applicatons.
Show
36
of 122 results
1
2
3
4