POLYCOR® ISO BR WHITE 9199

1 of 63 products in this brand
POLYCOR® ISO BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

Chemical Family: Isophthalics

Functions: Surface Finish

Color: Custom, Off White, Transparent, White

Features: Good Mechanical Properties, Improved Mechanical Properties

Technical Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Family
Composite Materials Functions

Features & Benefits

Materials Features

Applications & Uses

Application Method
Application Method

This gel coat is ready to use by application with a brush. Mix the product slowly but thoroughly for 10 minutes prior to each shift start up. Apply the correct film thickness. A wet film thickness between 300 to 600µm is required ideally working with a brush to ensure a level even thickness of 500 micron. Check that the correct level of MEKP is added. A level of 1,8% is recommended. Do not use more than 3% or lower than 1,2% MEKP catalyst. Minimum application temperature : 15°C This product is not designed for use with a spray gun.

Properties

Typical Properties
ValueUnitsTest Method / Conditions
Viscosity at 25°C (Brookfield RVT, spindle No.5 at 5 rpm)270 - 320poises
Thixotropic index at 25°C (Brookfield RVT, spindle No.5, speeds 5 and 50 rpm)3.8 - 4.4
Reactivity at 25°C, MEKP-925P1.8%
Gel Time 15 – 18 minutes15 - 18minutes
Hide Completed at300microns

Storage & Handling

Storage and Shelf Life

Shelf-life :

4 Months .

Storage :

When the product is sealed in its original packing, stored indoors away from direct sunlight and direct heat sources and ideally at ambient temperature between 15°C and 25°C .