Knowde Enhanced TDS
Identification & Functionality
- Composite Materials Functions
- Technologies
Applications & Uses
Properties
- Typical Properties
- Flammability
Value | Units | Test Method / Conditions | |
Surface Resistance | 10^13 | Ohm | IEC 60093 |
dielectric loss factor at 1000 Hz | 0,02 | tan s | IEC 60250 |
Shrinkage | 0,10 | % | ISO 2577 |
fibre length | 25 | mm | PA 3.01 |
heat distortion temperature | min. 200 | °C | ISO 75-2° |
tracking resistance | CTI 600 | level | IEC 60112 |
surface weight | 4 | g/m2 | ISO 10352 |
Curing Time | 65 | sec | ISO 12114/1 |
Flexural modulus | 9.5 | N/mm2 | ISO 14125 |
Specific volume resistance | 1014 | Ohm x cm | IEC 60093 |
fibre Content | 25 | % | ISO 1172 |
Specific Density | 1,77 | g/cm3 | ISO 1183 A |
Flexural strength | 150 | N/mm2 | ISO 14125 |
Tensile strength | 55 | KJ/m2 | ISO 179 |
impact strength | 65 | N/mm2 | ISO 527-4 |
incandescence bar test | FH - 40mm | classification | ISO 707/VDE 0304 part 3 |
dielectric strength | 22 | KV/mm | IEC 60243-2-1 |
dielectric constant at 1000 Hz | 4,5 | — | IEC 60250 |
glow wire test | min. 2,00 | thickness / °C | IEC 60695-2-1 |
glow wire test (punched plate) | min. 2,55 | thickness / °C | IEC 60695-2-1 |
Value | Units | Test Method / Conditions | |
Flammability | V 0 (3,5) | — | — |
Storage & Handling
- Handling and Storage
- Storage condition store dry at max
- 25 °C and out of direct sun light
- Molding time > 25 sec
- /mm
- Molding pressure 80 - 120 bar
- Molding temperature 140 - 150 °C