Knowde Enhanced TDS
Identification & Functionality
- Composite Materials Functions
- Technologies
Applications & Uses
Properties
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Surface Resistance | 10^13 | Ohm | IEC 60093 |
| dielectric loss factor at 1000 Hz | 0,02 | tan s | IEC 60250 |
| Shrinkage | 0,18 | % | ISO 2577 |
| Water absorption | 0,30 | % | ISO 62 |
| fibre length | 25 | mm | PA 3.01 |
| heat distortion temperature | min. 200 | °C | ISO 75-2° |
| tracking resistance | CTI 600 | level | IEC 60112 |
| Flexural modulus | 8 | N/mm2 | ISO 14125 |
| surface weight | 3.6 | g/m2 | ISO 10352 |
| Specific volume resistance | 1014 | Ohm x cm | IEC 60093 |
| Specific Density | 1,75 | g/cm3 | ISO 1183 A |
| Tensile strength | 55 | KJ/m2 | ISO 179 |
| fibre Content | 23 | % | ISO 1172 |
| Flexural strength | 140 | N/mm2 | ISO 14125 |
| impact strength | 50 | N/mm2 | ISO 527-4 |
| glow wire test | approved | — | IEC 60695-2-1 |
| dielectric strength | 240 | KV/mm | IEC 60243-1 |
| dielectric constant at 1000 Hz | 4,5 | — | IEC 60250 |
Storage & Handling
- Handling and Storage
- Storage condition store dry at max
- 25 °C and out of direct sun light
- Molding time > 25 sec
- /mm
- Molding pressure 80 - 120 bar
- Molding temperature 140 - 150 °C