Products

POLYCOR® ISO BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

Polynt Group HUP 16/23 RB-7035-V is generally used in building and construction, electronic and electrical applications.

Imedge® ECT120 Colors - epoxy compatible technology; MACT compliant gel coat for in-mold use with epoxy resin matrix laminates; deep, dark, rich Colors and high gloss parts; excellent color and gloss recovery after sanding and buffing; excellent scratch and wear resistance; resistance to porosity. Main applications areas are aeolian, textile industry etc.

Polynt Composites’ ArmorFlex® 953 Series gel coats are high performance products formulated for the fiberglass industry. They are primarily formulated for marine and sanitary applications,but should be used in any application where water and chemical resistance are needed. ArmorFlex® 953 Series also have exceptional gloss and buffing characteristics. While offering these benefits,the ArmorFlex® 953 Series gel coats have retained the important construction application qualities expected from Polynt Composites gel coats,such as resistance to porosity,tearing,and color separation; sag resistance; consistent liquid properties; excellent patchability; and more. These all add up to higher quality appeal in FRP parts made from Polynt’s ArmorFlex® HIGH GLOSS BUFFBACK® gel coats. ArmorFlex® 953 Series gel coats have enabled customers to meet and surpass all requirements of the American National Standard for plastic bathtubs,shower receptors and shower stalls,ANSI Z124.1,.2 and .3 –1995,Sec. 6.1.1. Gel coats in the 953 Series require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. ArmorFlex® HIGH GLOSS BUFFBACK® gel coats are available in the same wide range of colors as other POLYCOR® gel coats. Refer to Polynt’s POLYCOR® Color Card for color selection. Standard base white ArmorFlex® is 953WJ340.

Polynt Group SMC LS 3800 R25 RF C NERO is a sheet molding compound based on an unsaturated polyester resin, fire retardant grade, reinforced with glass fibers. SMC LS 3800 R25 RF C NERO has been developed for application where is requested anti-static protection SMC LS 3800 R25 RF C NERO joint good mechanical properties mainly for impact resistance. SMC LS 3800 R25 RF C NERO is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

EPOVIA OPTIMUM® KRF 1001 TAS - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce pipes and tanks through hand lay up and spray up method.

Polynt Group SMC LS 3681 CL1 is a sheet molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This SMC has been developed for railway applications. Good mechanical properties and good fire protection grade are combined into the SMC LS 3681 CL1. SMC LS 3681 CL1 complies with uni cei 11170-3 CL1a and electrical applications uni cei 11170-3 lr4. SMC LS 3681 CL1 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Polycor® Fireblock 2335 PA White 9199 - intumescent fire retardant properties that conforms to EN 45545 for internal panels in conjunction with fireblock resin systems. Main applications areas are aeronautical, railway sector etc.

NORSODYNE® H 84233 L - Unsaturated polyester resin in styrene,halogenated. It is used to produce building panels,parts with high resistance to fire through hand lay up and spray up,continuous laminating method.

Polynt Group HUP 19/23 RN-Color is generally used in electronic and electrical applications.

ARMORCOTE® SP - Light stabilized accelerated isophthalic gel coat base with medium reactivity and superior weather resistance.

Polynt Group 54X series gelcoat are formulated with a particular mix of polyester resins, for use in applications where sun exposure and weather conditions are a factor. They are suitable for boats, truck cabs, water slides and environments with humidity and direct sun exposure. This unique formulation is easier and quicker gloss recovery with less buffing time to achieve gloss.

NORSODYNE® T 16372 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce building panels,isothermal sandwich panels through continuos laminating method.

DISTITRON® 5119 ESX20Q - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce reinforced plastics,general purpose through hand lay up and spray up method.

ArmorFlex® 99F gel coats are advanced technology polyesters that have been formulated for the fiberglass industry. ArmorFlex® 99F gel coats have lower volatile organic compounds (VOC’s) than standard gel coats.

NORSODYNE® O 13155 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used in hand lay up and spray up method.

Aquamac® 700 is a high gloss styrene acrylic latex resin optimized to obtain water and corrosion resistance at low film builds. It offers excellent inherent corrosion resistance without the use of additives, which can be further enhanced with the addition of anticorrosive pigments. This latex resin is a formulator friendly, nontoxic waterborne alternative for maintenance, railcar and oem finishes. Manufactured in North America. All components of this product are listed on the DSL.

DISTITRON® 3519 A - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

POLYCOR® ISO PA WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

Norsodyne® G-650BY - preaccelerated, lining. It is generally used in marine applicatons.

Norsodyne® S-9211CT is filled resin, NF P92-507 and NFF 16-101 standard approved: M2 F2 and it is generally used in industrial sector, marine, mass transports, railway sector applicatons.

POLYCOR® 944 - Light stabilized accelerated isophthalic gel coat base with medium reactivity.

POLYCOR® TOOLING PA CLEAR 0200 - A pre-accelerated gel coat base on unsaturated polyester resin. It is cured using MEKP peroxide.This product is recommended for mold manufacturing process and provide durable surfaces to withstand the repeated moldings of GRP laminates.

POLYCOR® LSC NPG BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed.

RECarbon® 90CFP40-400gr - Recycled molding compound based on epoxy resin and reinforced with reinforced with pyrolized carbon fleece designed for compression molding technology. These material with a weight reduced potential and a high design freedom enter different areas for structural application where high mechanical properties are requested.

Polynt Group HUP 17/29 RB-7032 is generally used in electronic and electrical applications.

OPTIMOLD ll MONOCOMPOSANT - Mold construction. 24 hr turnaround,allows better rigidity and tool life. Use with Polycor Tooling gelcoat and skin coat. Main Applications areas are Building and Construction,Electronic and Electrical,Home and Domestic Applications,Industrial sector,Mass Transports,Railway Sector etc.

Polynt Group SMC LP 2500 R33 is a sheet molding compound based on an unsaturated polyester resin, reinforced with glass fibers. This SMC has been developed for structural parts. SMC LP 2500 R33 joint good mechanical properties and good varnish adhesion. SMC LP 2500 R33 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

Stypol® APVU4000 - polyvinyl acetate low profile additive. Class A surface and dimensional stability. Acid modified for thickening in compounding applications. Main applications areas are automotive, building and construction, home and domestic applications, industrial sector etc.

Polynt Group BMC RF 9/15 is a bulk molding compound based on an unsaturated polyester resin, fire retardant grade, halogen-free, reinforced with glass fibers. This BMC has been developed for electrical application. Good fire protection grade and good flow are combined into the BMC RF 9/15. BMC RF 9/15 is certified V0 3,0 mm by UL laboratories. BMC RF 9/15 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

DISTITRON® 822 S - Unsaturated polyester resin in styrene,Tetrahydrophthalic. It is used to produce putties through mix with fillers and/or additives.

Polymac® 5650 is a catalyst-free, carboxy-functional polyester resin designed to cure using TGIC at a 93:7 TGIC ratio. The resulting films using this resin system are characterized by high gloss, excellent hardness, excellent flexibility and color retention, and good exterior durability.

Polynt Group 10 - Dispersion of high quality pigments in a monomer-free reactive polyester grinding vehicle

STYPOL® 040-4950,040-4954,040-4956 and 040-4965 are clear MACT compliant NPG isophthalic gel coats. They have been designed for use in the manufacturing of cultured marble,onyx,and granite.

Polycor® NPG Sanitary PA White 9199 - high reactivity NPG based gel coat offering high resistance to porosity, chemical stain resistance and very good UV resistance. Available in White and off White shades. It is generally used in mass transports applicatons.

Polynt Group SMC LPA 2000 R27 is a sheet molding compound based on an unsaturated polyester resin class “A” grade reinforced with glass fibers. This SMC has been developed for body panel application, with good mechanical properties and excellent surface. Good varnish adhesion and excellent gluing are other peculiarities of SMC LPA 2000 R27. SMC LPA 2000 R27 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.