Products

NORSODYNE® C 55377 AL - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce agglomerated and engineered stones through casting method.

POLYCOR® ISO BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

ENYDYNE® H 68377 TAE - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in hand lay up and spray up method.

Polynt Composites’ ArmorFlex® 953 Series gel coats are high performance products formulated for the fiberglass industry. They are primarily formulated for marine and sanitary applications,but should be used in any application where water and chemical resistance are needed. ArmorFlex® 953 Series also have exceptional gloss and buffing characteristics. While offering these benefits,the ArmorFlex® 953 Series gel coats have retained the important construction application qualities expected from Polynt Composites gel coats,such as resistance to porosity,tearing,and color separation; sag resistance; consistent liquid properties; excellent patchability; and more. These all add up to higher quality appeal in FRP parts made from Polynt’s ArmorFlex® HIGH GLOSS BUFFBACK® gel coats. ArmorFlex® 953 Series gel coats have enabled customers to meet and surpass all requirements of the American National Standard for plastic bathtubs,shower receptors and shower stalls,ANSI Z124.1,.2 and .3 –1995,Sec. 6.1.1. Gel coats in the 953 Series require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. ArmorFlex® HIGH GLOSS BUFFBACK® gel coats are available in the same wide range of colors as other POLYCOR® gel coats. Refer to Polynt’s POLYCOR® Color Card for color selection. Standard base white ArmorFlex® is 953WJ340.

Polynt Group HUP 16/23 RB-7035-V is generally used in building and construction, electronic and electrical applications.

DISTITRON® 629 S - Unsaturated polyester resin in styrene,special. It is used to produce furnitures and sanitary through casting,to be used with trihydrate of alumina method.

EPOVIA OPTIMUM® KRF 1001 TAS - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce pipes and tanks through hand lay up and spray up method.

NORSODYNE® H 84233 L - Unsaturated polyester resin in styrene,halogenated. It is used to produce building panels,parts with high resistance to fire through hand lay up and spray up,continuous laminating method.

ARMORCOTE® SP - Light stabilized accelerated isophthalic gel coat base with medium reactivity and superior weather resistance.

DISTITRON® 458 EN2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce polymeric concrete through casting,mix with fillers and/or additives method.

POLYCOR® ISO BR - Light stabilized accelerated isophthalic gel coat base with medium reactivity.It is used in general purpose applications,marine,sanitary,etc…

NORSODYNE® T 16372 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce building panels,isothermal sandwich panels through continuos laminating method.

NORSODYNE® O 12335 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce inclusion through casting method.

DISTITRON® 5119 ESX20Q - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce reinforced plastics,general purpose through hand lay up and spray up method.

Polynt Group SMC LS 3022 R30 is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This SMC has been developed for structural parts. SMC LS 3022 R30 joint good mechanical properties and good surface. SMC LS 3022 R30 complies with BS 6920 water quality. SMC LS 3022 R30 is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

DISTITRON® 3519 A - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

ArmorFlex® 99F gel coats are advanced technology polyesters that have been formulated for the fiberglass industry. ArmorFlex® 99F gel coats have lower volatile organic compounds (VOC’s) than standard gel coats.

POLYCOR® ISO PA WHITE 9199 - A pre-accelerated gel coat based on Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This gel coat is formulated to meet the rigid requirements of transportation,boating and sanitary applications.

NORSODYNE® O 13155 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used in hand lay up and spray up method.

Distitron® 3519A1V5 - preaccelerated, UV stabilized. Main applications areas are furniture, home and domestic applications etc.

DISTITRON® 510 V5 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce flat sheets,laminates,transparent and corrugated sheets through continuous laminating method.

DISTITRON® 427 AN2 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce furnitures and sanitary through casting,mix with fillers and/or additives method.

OPTIMOLD ll MONOCOMPOSANT - Mold construction. 24 hr turnaround,allows better rigidity and tool life. Use with Polycor Tooling gelcoat and skin coat. Main Applications areas are Building and Construction,Electronic and Electrical,Home and Domestic Applications,Industrial sector,Mass Transports,Railway Sector etc.

NORSODYNE® H 36338 TA - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce pipes and tanks,pools through hand lay up and spray up method.

Norsodyne® 2625 - promoted and non-waxed, high cross-linked resin, high hdt, excellent chemical resistance. Main applications areas are automotive, building and construction, industrial sector, marine etc.

ENYDYNE® R 61500 T - Unsaturated polyester resin in styrene,DCPD. It is used to produce pipes and tanks.

DISTITRON® 429 BSX25Q - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce marine,boats through hand lay up and spray up method.

DISTITRON® 414 CV3 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce polymeric concrete through casting,injection molding,rtm method.

Polynt Group 10 - Dispersion of high quality pigments in a monomer-free reactive polyester grinding vehicle

Stypol® 040-8086 - pre-promoted unsaturated polyester laminating resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

ENYDYNE® C 66141 L - Unsaturated polyester resin in styrene,DCPD. It is used to produce polymeric concrete through casting method.

DISTITRON® 184 - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce bmc and smc manufacture,very good mechanical properties through hot press molding method.

NORSODYNE® Y 90286 - Unsaturated polyester resin in styrene,Tetrahydrophthalic. It is used to produce mastics,putties.

Polynt Group 752-4420 is general purpose RTM resin with rapid cure rate for increased mold turn over; good profile; UL 94 V-O and 5V listed product; class I flame-retardant without additional additives; meets mil-r-7575c requirements for grade a applications. Main applications areas are aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports, railway sector etc.

Stypol® APVU4000 - polyvinyl acetate low profile additive. Class A surface and dimensional stability. Acid modified for thickening in compounding applications. Main applications areas are automotive, building and construction, home and domestic applications, industrial sector etc.

ENYDYNE® I 65133 A - Unsaturated polyester resin in styrene,DCPD. It is used as general purpose in injection molding,rtm method.