Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
Polyplastics Group
All Polyplastics Group
Search products
Matching Product Categories
Plastics
Markets
Labeling Claims
Physical Form
Regional Availability
All Filters
211 Products found on Polyplastics Group
Most Viewed
TDS
With TDS
Topas® 8007S-04
Polymer Name:
Cyclic Olefin Copolymer (COC)
Processing Methods:
Injection Molding
Polyplastics Group Topas® 8007S-04Product DescriptionTOPAS 8007S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. Analytical results are more accurate with TOPAS COC in contact with sensitive chemistries.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO and gamma sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 8007X10 - our highest ultraviolet (UV) transmission grade Topas® 8007S-04Topas® 8007S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer
Topas® 8007X-10
Polymer Name:
Cyclic Olefin Copolymer (COC)
Processing Methods:
Injection Molding
Polyplastics Group Topas® 8007X-10 is a highly UV-transparent version of our 8007 series of injection molding resins. Like the rest of the 8007 grades, 8007X10 is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for diagnostic and analytical products. It transmits ultraviolet light at lower wavelengths than other polymers. Analytical results are more accurate with pure TOPAS COC and its higher UV transmission for more precise analysis in contact with sensitive chemistries.
Duracon® NW-02
Polymer Name:
POM/PE Alloy
Processing Methods:
Injection Molding
Density:
1360.0 - 1360.0 kg/m³
Flexural Modulus:
2200.0 - 2200.0 MPa
Tensile Strength:
52.0 - 52.0 MPa
Polyplastics Group Duracon® NW-02 is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Lubricated
Duracon® M90-45
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
2500.0 - 2500.0 MPa
Polyplastics Group Duracon® M90-45 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive.Characteristics include: Flame Rated Weather Resistant
Duracon® M270-44
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
2550.0 - 2550.0 MPa
Polyplastics Group Duracon® M270-44 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive.Characteristics include: Flame Rated Fast Molding Cycle High Flow
Duranex® 201AC
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Flexural Modulus:
2410.0 - 2410.0 MPa
Polyplastics Group Duranex® 201AC is a Polybutylene Terephthalate (PBT) product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.
Duracon® M25-44
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
2350.0 - 2350.0 MPa
Polyplastics Group Duracon® M25-44 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive.Characteristics include: Flame Rated High Viscosity
Durafide® 1140A6
Polymer Name:
Polyphenylene Sulfide (PPS)
Fillers Included:
Glass Fiber
Flexural Modulus:
14000.0 - 14000.0 MPa
Polyplastics Group Durafide® 1140A6 is a Polyphenylene Sulfide (PPS) product filled with 40% glass fiber. It is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated High Strength
Duranex® 531 HS
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
8100.0 - 8100.0 MPa
Polyplastics Group Duranex® 531 HS is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.
Duracon® AW-01
Polymer Name:
POM/PE Alloy
Processing Methods:
Injection Molding
Density:
1370.0 - 1370.0 kg/m³
Flexural Modulus:
2200.0 - 2200.0 MPa
Tensile Strength:
54.0 - 54.0 MPa
Polyplastics Group Duracon® AW-01 is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Lubricated
Duracon® EX-09
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Extrusion
Polyplastics Group Duracon® EX-09 is an Acetal (POM) Copolymer product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America. Typical application: Plumbing/Piping/Potable Water. Primary characteristic: flame rated.
Duracon® SW-01
Polymer Name:
POM/PE Alloy
Processing Methods:
Injection Molding
Density:
1420.0 - 1420.0 kg/m³
Flexural Modulus:
2500.0 - 2500.0 MPa
Tensile Strength:
50.0 - 50.0 MPa
Polyplastics Group Duracon® SW-01 is an Acetal (POM) Copolymer + PE product filled with 10% calcium carbonate. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Lubricated
Duranex® 733LD
Polymer Name:
PBT/SAN Alloy
Processing Methods:
Injection Molding
Density:
1460.0 - 1460.0 kg/m³
Flexural Modulus:
9000.0 - 9000.0 MPa
Tensile Strength:
139.0 - 139.0 MPa
Polyplastics Group Duranex® 733LD is a Polybutylene Terephthalate + SAN (PBT+SAN) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Warp Resistant
Duracon® GH-25
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
7900.0 - 7900.0 MPa
Polyplastics Group Duracon® GH-25 is an Acetal (POM) Copolymer product filled with 25% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive.Characteristics include: Flame Rated High Strength Rigid
Duranex® 3300
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
9030.0 - 9030.0 MPa
Polyplastics Group Duranex® 3300 is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive. Primary characteristic: flame rated.
Topas® 5013L-10
Polymer Name:
Cyclic Olefin Copolymer (COC)
Processing Methods:
Injection Molding
Additives Included:
Lubricant (Unspecified)
Polyplastics Group Topas® 5013L-10Product DescriptionTOPAS 5013L-10 is a high flow, internally lubricated injection molding grade with a 130°C heat distortion temperature. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. The 5013 resin series features high flow characteristics for excellent mold detail replication. This grade has a high heat distortion temperature to withstand 95°C PCR protocols, is suitable for gamma or EtO procedures.Selected Applications Labware Microplates and biochips Microfluidics Optics Electronics Cuvettes Healthcare Leading Attributes Temperature resistant with glass-like clarity; purity Heat and chemical resistant, clarity and purity Exceptional mold detail replication; machinable Clarity, low birefringence, low moisture sensitivity Low dielectric constant, high flow, thermoplastic More UV transparent than most resins (see 8007X10) Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 5013S-04 - non-lubricated high flow version TOPAS 6013M-07 - broader processing version especially suited for IBM/ISBM TOPAS 6015S-04 - higher heat distortion temperature (150°C) for 134°C protocols Topas® 5013L-10Topas® 5013L-10 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific. Applications of Topas® 5013L-10 include lighting applications and optics/lenses.Characteristics include: Flame Rated Copolymer
Topas® 5013F-04
Polymer Name:
Cyclic Olefin Copolymer (COC)
Processing Methods:
Film Extrusion, Thermoforming, Coextrusion
Polyplastics Group Topas® 5013F-04 is a high temperature film extrusion grade for blends. It is a high clarity amorphous resin with high flow, high stiffness, moisture barrier, chemical resistance, thermoformability and purity for food and healthcare applications. It is used in monolayer cast blends, and in coextruded blends in both cast and blown processes, for a wide variety of film and sheet products requiring excellent optics in applications such as heat resistant blister, hot fill, and easy tear packaging. If performance at elevated temperatures is not required, we also offer lower glass transition temperature (Tg) grades of TOPAS.
Duracon® M90-44
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
2500.0 - 2500.0 MPa
Polyplastics Group Duracon® M90-44 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive. Primary characteristic: flame rated.
Duracon® M90-45LV
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
2300.0 - 2300.0 MPa
Polyplastics Group Duracon® M90-45LV is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive.Characteristics include: Flame Rated Weather Resistant
Duranex® 3105
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
5330.0 - 5330.0 MPa
Polyplastics Group Duranex® 3105 is a Polybutylene Terephthalate (PBT) product filled with 15% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.
Duranex® 7407
Polymer Name:
PC/PBT Alloy
Processing Methods:
Injection Molding
Density:
1570.0 - 1570.0 kg/m³
Flexural Modulus:
9500.0 - 9500.0 MPa
Tensile Strength:
117.0 - 117.0 MPa
Polyplastics Group Duranex® 7407 is a Polycarbonate + PBT (PC+PBT) product filled with 40% glass fiber\glass flake. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Warp Resistant
Duracon® LW-02
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Polyplastics Group Duracon® LW-02 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.
FR-PET® B3015FA
Polymer Name:
Polyethylene Terephthalate (PET)
Fillers Included:
Glass Fiber
Flexural Modulus:
6300.0 - 6300.0 MPa
Polyplastics Group FR-PET® B3015FA is a Polyethylene Terephthalate (PET) product filled with 15% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.
Duracon® TF-30
Polymer Name:
Polyacetal Copolymer (POM), Polyurethane (unspecified)
Processing Methods:
Injection Molding
Density:
1350.0 - 1350.0 kg/m³
Tensile Strength:
37.0 - 37.0 MPa
Polyplastics Group Duracon® TF-30 is an Acetal (POM) Copolymer + PUR product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Good Flexibility Impact Resistant
Duracon® TF-10LV
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
1700.0 - 1700.0 MPa
Polyplastics Group Duracon® TF-10LV is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: good toughness.
Duracon® M25LV
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
2200.0 - 2200.0 MPa
Polyplastics Group Duracon® M25LV is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.
Topas® 8007F-04
Polymer Name:
Cyclic Olefin Copolymer (COC)
Processing Methods:
Film Extrusion, Thermoforming, Coextrusion
Polyplastics Group Topas® 8007F-04Product DescriptionTOPAS 8007F-04 is a general purpose film extrusion grade. It is a high clarity amorphous resin with high stiffness, moisture barrier, chemical resistance, thermoformability and purity for food and healthcare applications. It is used in monolayer cast applications, and in coextrusions in both cast and blown processes, for a wide variety of film and sheet products requiring excellent optics in applications such as blister, twist, barrier, shrink and easy tear packaging. Industrial uses include formed decorative sheet products. For property enhancement at elevated temperatures, higher glass transition temperature (Tg) grades of TOPAS are recommended.Selected Applications Pharmaceutical blisters Deep draw barrier trays Shrink films and labels Twist films Decorative sheet Food packaging Healthcare and food contact Leading Attributes Clarity, forming, barrier, purity, halogen-free Excellent deep forming, unlike other barriers High shrink, low stress, gloss, clarity, toughness High gloss, outstanding deadfold, clean cutting Gloss, hardness, chemical resistance, forming Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Packaging and Film Extrusion TOPAS 8007F-600 - robust clarity extrusion grade especially for PE blends Topas® 8007F-04Topas® 8007F-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific. Typical application: Film. Primary characteristic: copolymer.
Duracon® SW-41
Polymer Name:
POM/PE Alloy
Processing Methods:
Injection Molding
Density:
1510.0 - 1510.0 kg/m³
Flexural Modulus:
4900.0 - 4900.0 MPa
Tensile Strength:
59.0 - 59.0 MPa
Polyplastics Group Duracon® SW-41 is an Acetal (POM) Copolymer + PE product filled with 20% mineral. It can be processed by injection molding and is available in Asia Pacific or North America.Characteristics include: Flame Rated Rigid
Duranex® HN7330N B
Polymer Name:
PC/PBT Alloy
Processing Methods:
Injection Molding
Density:
1640.0 - 1640.0 kg/m³
Flexural Modulus:
9880.0 - 9880.0 MPa
Tensile Strength:
132.0 - 132.0 MPa
Polyplastics Group Duranex® HN7330N B is a Polycarbonate + PBT (PC+PBT) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.
Duranex® 310NF
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Additives Included:
Flame Retardant
Flexural Modulus:
5000.0 - 5000.0 MPa
Polyplastics Group Duranex® 310NF is a Polybutylene Terephthalate (PBT) product filled with 10% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Flame Retardant Halogen Free
Duranex® 7400W
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Flake, Glass Fiber
Flexural Modulus:
9500.0 - 9500.0 MPa
Polyplastics Group Duranex® 7400W is a Polybutylene Terephthalate (PBT) product filled with 40% glass fiber\glass flake. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Warp Resistant
Durafide® 1140A64
Polymer Name:
Polyphenylene Sulfide (PPS)
Fillers Included:
Glass Fiber
Flexural Modulus:
14000.0 - 14000.0 MPa
Polyplastics Group Durafide® 1140A64 is a Polyphenylene Sulfide (PPS) product filled with 40% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.
Duracon® CP15X
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
2450.0 - 2450.0 MPa
Polyplastics Group Duracon® CP15X is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Creep Resistant
Duranex® 2002
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Flexural Modulus:
2630.0 - 2630.0 MPa
Polyplastics Group Duranex® 2002 is a Polybutylene Terephthalate (PBT) product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Good Toughness
Duranex® 652SA
Polymer Name:
PBT/ABS Alloy
Processing Methods:
Injection Molding
Density:
1450.0 - 1450.0 kg/m³
Flexural Modulus:
5500.0 - 5500.0 MPa
Tensile Strength:
51.0 - 51.0 MPa
Polyplastics Group Duranex® 652SA is an Acrylonitrile Butadiene Styrene + PBT (ABS+PBT) product filled with 20% mica. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Flame Retardant Warp Resistant Wear Resistant
Topas® 5013S-04
Polymer Name:
Cyclic Olefin Copolymer (COC)
Processing Methods:
Injection Molding
Polyplastics Group Topas® 5013S-04 is a high flow injection molding grade with a 130°C heat distortion temperature. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. The 5013 resin series features high flow characteristics for excellent mold detail replication. Lower leachables and extractables of TOPAS COC preserve content stability and quality, and chemical purity. This grade has a high heat distortion temperature to withstand 95°C PCR protocols, and is suitable for gamma or EtO procedures.
Show
36
of 211 results
1
2
3
4
5
6