Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
Polyplastics Group
All Polyplastics Group
Search products
Matching Product Categories
Plastics
Markets
Labeling Claims
Physical Form
Regional Availability
All Filters
138 Products found on Polyplastics Group
Most Viewed
TDS
With TDS
Topas® 8007S-04
Polymer Name:
Cyclic Olefin Copolymer (COC)
Processing Methods:
Injection Molding
Polyplastics Group Topas® 8007S-04Product DescriptionTOPAS 8007S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. Analytical results are more accurate with TOPAS COC in contact with sensitive chemistries.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO and gamma sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 8007X10 - our highest ultraviolet (UV) transmission grade Topas® 8007S-04Topas® 8007S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer
Topas® 8007X-10
Polymer Name:
Cyclic Olefin Copolymer (COC)
Processing Methods:
Injection Molding
Polyplastics Group Topas® 8007X-10 is a highly UV-transparent version of our 8007 series of injection molding resins. Like the rest of the 8007 grades, 8007X10 is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for diagnostic and analytical products. It transmits ultraviolet light at lower wavelengths than other polymers. Analytical results are more accurate with pure TOPAS COC and its higher UV transmission for more precise analysis in contact with sensitive chemistries.
Duracon® NW-02
Polymer Name:
POM/PE Alloy
Processing Methods:
Injection Molding
Density:
1360.0 - 1360.0 kg/m³
Flexural Modulus:
2200.0 - 2200.0 MPa
Tensile Strength:
52.0 - 52.0 MPa
Polyplastics Group Duracon® NW-02 is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Lubricated
Duracon® M90-45
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
2500.0 - 2500.0 MPa
Polyplastics Group Duracon® M90-45 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive.Characteristics include: Flame Rated Weather Resistant
Duracon® M270-44
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
2550.0 - 2550.0 MPa
Polyplastics Group Duracon® M270-44 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive.Characteristics include: Flame Rated Fast Molding Cycle High Flow
Duracon® M25-44
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
2350.0 - 2350.0 MPa
Polyplastics Group Duracon® M25-44 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive.Characteristics include: Flame Rated High Viscosity
Duranex® 201AC
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Flexural Modulus:
2410.0 - 2410.0 MPa
Polyplastics Group Duranex® 201AC is a Polybutylene Terephthalate (PBT) product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.
Duranex® 531 HS
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
8100.0 - 8100.0 MPa
Polyplastics Group Duranex® 531 HS is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.
Duracon® AW-01
Polymer Name:
POM/PE Alloy
Processing Methods:
Injection Molding
Density:
1370.0 - 1370.0 kg/m³
Flexural Modulus:
2200.0 - 2200.0 MPa
Tensile Strength:
54.0 - 54.0 MPa
Polyplastics Group Duracon® AW-01 is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Lubricated
Duracon® SW-01
Polymer Name:
POM/PE Alloy
Processing Methods:
Injection Molding
Density:
1420.0 - 1420.0 kg/m³
Flexural Modulus:
2500.0 - 2500.0 MPa
Tensile Strength:
50.0 - 50.0 MPa
Polyplastics Group Duracon® SW-01 is an Acetal (POM) Copolymer + PE product filled with 10% calcium carbonate. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Lubricated
Duranex® 733LD
Polymer Name:
PBT/SAN Alloy
Processing Methods:
Injection Molding
Density:
1460.0 - 1460.0 kg/m³
Flexural Modulus:
9000.0 - 9000.0 MPa
Tensile Strength:
139.0 - 139.0 MPa
Polyplastics Group Duranex® 733LD is a Polybutylene Terephthalate + SAN (PBT+SAN) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Warp Resistant
Duracon® GH-25
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
7900.0 - 7900.0 MPa
Polyplastics Group Duracon® GH-25 is an Acetal (POM) Copolymer product filled with 25% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive.Characteristics include: Flame Rated High Strength Rigid
Duranex® 3300
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
9030.0 - 9030.0 MPa
Polyplastics Group Duranex® 3300 is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive. Primary characteristic: flame rated.
Duracon® M90-44
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
2500.0 - 2500.0 MPa
Polyplastics Group Duracon® M90-44 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive. Primary characteristic: flame rated.
Duracon® M90-45LV
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
2300.0 - 2300.0 MPa
Polyplastics Group Duracon® M90-45LV is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive.Characteristics include: Flame Rated Weather Resistant
Duranex® 3105
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
5330.0 - 5330.0 MPa
Polyplastics Group Duranex® 3105 is a Polybutylene Terephthalate (PBT) product filled with 15% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.
Duranex® 7407
Polymer Name:
PC/PBT Alloy
Processing Methods:
Injection Molding
Density:
1570.0 - 1570.0 kg/m³
Flexural Modulus:
9500.0 - 9500.0 MPa
Tensile Strength:
117.0 - 117.0 MPa
Polyplastics Group Duranex® 7407 is a Polycarbonate + PBT (PC+PBT) product filled with 40% glass fiber\glass flake. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Warp Resistant
FR-PET® B3015FA
Polymer Name:
Polyethylene Terephthalate (PET)
Fillers Included:
Glass Fiber
Flexural Modulus:
6300.0 - 6300.0 MPa
Polyplastics Group FR-PET® B3015FA is a Polyethylene Terephthalate (PET) product filled with 15% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.
Duracon® M25LV
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
2200.0 - 2200.0 MPa
Polyplastics Group Duracon® M25LV is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.
Duracon® SW-41
Polymer Name:
POM/PE Alloy
Processing Methods:
Injection Molding
Density:
1510.0 - 1510.0 kg/m³
Flexural Modulus:
4900.0 - 4900.0 MPa
Tensile Strength:
59.0 - 59.0 MPa
Polyplastics Group Duracon® SW-41 is an Acetal (POM) Copolymer + PE product filled with 20% mineral. It can be processed by injection molding and is available in Asia Pacific or North America.Characteristics include: Flame Rated Rigid
Duranex® 7400W
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Flake, Glass Fiber
Flexural Modulus:
9500.0 - 9500.0 MPa
Polyplastics Group Duranex® 7400W is a Polybutylene Terephthalate (PBT) product filled with 40% glass fiber\glass flake. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Warp Resistant
Duracon® CP15X
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
2450.0 - 2450.0 MPa
Polyplastics Group Duracon® CP15X is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Creep Resistant
Duranex® 701SA
Polymer Name:
PBT/ABS Alloy
Processing Methods:
Injection Molding
Density:
1430.0 - 1430.0 kg/m³
Flexural Modulus:
7000.0 - 7000.0 MPa
Tensile Strength:
96.0 - 96.0 MPa
Polyplastics Group Duranex® 701SA is an Acrylonitrile Butadiene Styrene + PBT (ABS+PBT) product filled with 30% glass fiber\glass flake. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Warp Resistant Wear Resistant
Duranex® 2002
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Flexural Modulus:
2630.0 - 2630.0 MPa
Polyplastics Group Duranex® 2002 is a Polybutylene Terephthalate (PBT) product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Good Toughness
Topas® 5013S-04
Polymer Name:
Cyclic Olefin Copolymer (COC)
Processing Methods:
Injection Molding
Polyplastics Group Topas® 5013S-04 is a high flow injection molding grade with a 130°C heat distortion temperature. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. The 5013 resin series features high flow characteristics for excellent mold detail replication. Lower leachables and extractables of TOPAS COC preserve content stability and quality, and chemical purity. This grade has a high heat distortion temperature to withstand 95°C PCR protocols, and is suitable for gamma or EtO procedures.
Duracon® YF-5
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Additives Included:
Lubricant (Unspecified)
Flexural Modulus:
2200.0 - 2200.0 MPa
Polyplastics Group Duracon® YF-5 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Lubricated Wear Resistant
Duranex® 303RA
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
8700.0 - 8700.0 MPa
Polyplastics Group Duranex® 303RA is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Good Adhesion
Duracon® AW-01LV
Polymer Name:
POM/PE Alloy
Processing Methods:
Injection Molding
Density:
1370.0 - 1370.0 kg/m³
Flexural Modulus:
2100.0 - 2100.0 MPa
Tensile Strength:
52.0 - 52.0 MPa
Polyplastics Group Duracon® AW-01LV is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.
Duracon® TR-20LV
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Fillers Included:
Mineral
Flexural Modulus:
3900.0 - 3900.0 MPa
Polyplastics Group Duracon® TR-20LV is an Acetal (POM) Copolymer product filled with mineral. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.
Duracon® GH-25LV
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
7600.0 - 7600.0 MPa
Polyplastics Group Duracon® GH-25LV is an Acetal (POM) Copolymer product filled with 25% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.
Duracon® M450-44
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
2550.0 - 2550.0 MPa
Polyplastics Group Duracon® M450-44 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Fast Molding Cycle High Flow
Duracon® SF-15
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
1500.0 - 1500.0 MPa
Polyplastics Group Duracon® SF-15 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Good Flexibility Impact Resistant
Duracon® JW-03
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Additives Included:
Lubricant (Unspecified)
Flexural Modulus:
2400.0 - 2400.0 MPa
Polyplastics Group Duracon® JW-03 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Lubricated
Duracon® TR-20
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Fillers Included:
Talc
Flexural Modulus:
4100.0 - 4100.0 MPa
Polyplastics Group Duracon® TR-20 is an Acetal (POM) Copolymer product filled with 15% talc. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Rigid Warp Resistant
Duranex® SF3300
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
9340.0 - 9340.0 MPa
Polyplastics Group Duranex® SF3300 is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated High Flow
Duranex® 2002K
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Additives Included:
Lubricant (Unspecified)
Flexural Modulus:
3100.0 - 3100.0 MPa
Polyplastics Group Duranex® 2002K is a Polybutylene Terephthalate (PBT) product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Lubricated Wear Resistant
Show
36
of 138 results
1
2
3
4