Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
Polyplastics Group
All Polyplastics Group
Search products
Matching Product Categories
Plastics
Markets
Labeling Claims
Physical Form
Regional Availability
All Filters
291 Products found on Polyplastics Group
Most Viewed
TDS
With TDS
Topas® 8007S-04
Polymer Name:
Cyclic Olefin Copolymer (COC)
Processing Methods:
Injection Molding
Polyplastics Group Topas® 8007S-04Product DescriptionTOPAS 8007S-04 is a general purpose injection molding grade. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. Analytical results are more accurate with TOPAS COC in contact with sensitive chemistries.Selected Applications Drug delivery Prefilled syringes, vials, cartridges Bottles and tubes Surgical instruments IV containers and components Labware Optics Electronics Food packaging Healthcare and food contact Leading Attributes Low leachables & extractables, low water transmission Non-ionic, does not promote adsorption like glass Minimally reactive Chemically resistant to alcohol, acetone, and acrylates Transparent, withstands EtO and gamma sterilization Temperature resistance, clarity and purity Clarity, low birefringence, low moisture sensitivity Low dielectric constant, thermoplastic Not manufactured with BPA, phthalates, or halogens Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 8007X10 - our highest ultraviolet (UV) transmission grade Topas® 8007S-04Topas® 8007S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer
Topas® 8007X-10
Polymer Name:
Cyclic Olefin Copolymer (COC)
Processing Methods:
Injection Molding
Polyplastics Group Topas® 8007X-10 is a highly UV-transparent version of our 8007 series of injection molding resins. Like the rest of the 8007 grades, 8007X10 is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for diagnostic and analytical products. It transmits ultraviolet light at lower wavelengths than other polymers. Analytical results are more accurate with pure TOPAS COC and its higher UV transmission for more precise analysis in contact with sensitive chemistries.
Duracon® NW-02
Polymer Name:
POM/PE Alloy
Processing Methods:
Injection Molding
Density:
1360.0 - 1360.0 kg/m³
Flexural Modulus:
2200.0 - 2200.0 MPa
Tensile Strength:
52.0 - 52.0 MPa
Polyplastics Group Duracon® NW-02 is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Lubricated
Duracon® M90-45
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
2500.0 - 2500.0 MPa
Polyplastics Group Duracon® M90-45 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive.Characteristics include: Flame Rated Weather Resistant
Duracon® M270-44
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
2550.0 - 2550.0 MPa
Polyplastics Group Duracon® M270-44 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive.Characteristics include: Flame Rated Fast Molding Cycle High Flow
Topas® 6013S-04
Polymer Name:
Cyclic Olefin Copolymer (COC)
TOPAS® 6013S-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific.Characteristics include: Flame Rated Copolymer
Duranex® CRN7000
Polymer Name:
Polybutylene Terephthalate (PBT)
Flexural Modulus:
3050.0 - 3050.0 MPa
Duranex® CRN7000 by Polyplastics Group is comprised of Polybutylene Terephthalate. It is commonly used
Duranex® 201AC
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Flexural Modulus:
2410.0 - 2410.0 MPa
Polyplastics Group Duranex® 201AC is a Polybutylene Terephthalate (PBT) product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.
Duracon® M25-44
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
2350.0 - 2350.0 MPa
Polyplastics Group Duracon® M25-44 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive.Characteristics include: Flame Rated High Viscosity
Durafide® 1140A6
Polymer Name:
Polyphenylene Sulfide (PPS)
Fillers Included:
Glass Fiber
Flexural Modulus:
14000.0 - 14000.0 MPa
Polyplastics Group Durafide® 1140A6 is a Polyphenylene Sulfide (PPS) product filled with 40% glass fiber. It is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated High Strength
Tepcon® M90 NAT
Polymer Name:
Polyacetal Copolymer (POM)
TEPCON® M90 NAT is an Acetal (POM) Copolymer product. It is available in Asia Pacific. Primary characteristic: flame rated.
Duranex® 531 HS
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
8100.0 - 8100.0 MPa
Polyplastics Group Duranex® 531 HS is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.
Duracon® AW-01
Polymer Name:
POM/PE Alloy
Processing Methods:
Injection Molding
Density:
1370.0 - 1370.0 kg/m³
Flexural Modulus:
2200.0 - 2200.0 MPa
Tensile Strength:
54.0 - 54.0 MPa
Polyplastics Group Duracon® AW-01 is an Acetal (POM) Copolymer + PE product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Lubricated
Duracon® EX-09
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Extrusion
Polyplastics Group Duracon® EX-09 is an Acetal (POM) Copolymer product. It can be processed by extrusion and is available in Asia Pacific, Europe, or North America. Typical application: Plumbing/Piping/Potable Water. Primary characteristic: flame rated.
Duracon® SW-01
Polymer Name:
POM/PE Alloy
Processing Methods:
Injection Molding
Density:
1420.0 - 1420.0 kg/m³
Flexural Modulus:
2500.0 - 2500.0 MPa
Tensile Strength:
50.0 - 50.0 MPa
Polyplastics Group Duracon® SW-01 is an Acetal (POM) Copolymer + PE product filled with 10% calcium carbonate. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Lubricated
Laperos® E473i
Polymer Name:
Liquid Crystal Polymer (LCP)
Fillers Included:
Glass Fiber, Mineral
Flexural Modulus:
11000.0 - 11000.0 MPa
Polyplastics Group Laperos® E473i is a Liquid Crystal Polymer (LCP) product filled with 30% glass\mineral. It is available in Asia Pacific.Characteristics include: Flame Rated High Flow Warp Resistant
Duranex® 733LD
Polymer Name:
PBT/SAN Alloy
Processing Methods:
Injection Molding
Density:
1460.0 - 1460.0 kg/m³
Flexural Modulus:
9000.0 - 9000.0 MPa
Tensile Strength:
139.0 - 139.0 MPa
Polyplastics Group Duranex® 733LD is a Polybutylene Terephthalate + SAN (PBT+SAN) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Warp Resistant
Duracon® GH-25
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
7900.0 - 7900.0 MPa
Polyplastics Group Duracon® GH-25 is an Acetal (POM) Copolymer product filled with 25% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive.Characteristics include: Flame Rated High Strength Rigid
Duranex® 3300
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
9030.0 - 9030.0 MPa
Polyplastics Group Duranex® 3300 is a Polybutylene Terephthalate (PBT) product filled with 30% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive. Primary characteristic: flame rated.
Tepcon® M90-10
Polymer Name:
Polyacetal Copolymer (POM)
TEPCON® M90-10 is an Acetal (POM) Copolymer product. It is available in Asia Pacific. Primary characteristic: flame rated.
Duranex® 3316
Flexural Modulus:
10000.0 - 10000.0 MPa
Duranex® 3316 by Polyplastics Group is comprised of Polybutylene Terephthalate. It is commonly used
Laperos® E130i
Polymer Name:
Liquid Crystal Polymer (LCP)
Fillers Included:
Glass Fiber
Flexural Modulus:
15000.0 - 15000.0 MPa
LAPEROS® E130i is a Liquid Crystal Polymer (LCP) product filled with 30% glass fiber. It is available in Asia Pacific. Primary characteristic: flame rated.
Duranex® CN7030
Polymer Name:
Polybutylene Terephthalate (PBT)
Flexural Modulus:
10300.0 - 10300.0 MPa
Duranex® CN7030 by Polyplastics Group is comprised of Polybutylene Terephthalate. It is commonly used
Topas® 5013L-10
Polymer Name:
Cyclic Olefin Copolymer (COC)
Processing Methods:
Injection Molding
Additives Included:
Lubricant (Unspecified)
Polyplastics Group Topas® 5013L-10Product DescriptionTOPAS 5013L-10 is a high flow, internally lubricated injection molding grade with a 130°C heat distortion temperature. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. The 5013 resin series features high flow characteristics for excellent mold detail replication. This grade has a high heat distortion temperature to withstand 95°C PCR protocols, is suitable for gamma or EtO procedures.Selected Applications Labware Microplates and biochips Microfluidics Optics Electronics Cuvettes Healthcare Leading Attributes Temperature resistant with glass-like clarity; purity Heat and chemical resistant, clarity and purity Exceptional mold detail replication; machinable Clarity, low birefringence, low moisture sensitivity Low dielectric constant, high flow, thermoplastic More UV transparent than most resins (see 8007X10) Broad regulatory compliance Related Grades for Injection Molding, Healthcare, Optics and Diagnostics TOPAS 5013S-04 - non-lubricated high flow version TOPAS 6013M-07 - broader processing version especially suited for IBM/ISBM TOPAS 6015S-04 - higher heat distortion temperature (150°C) for 134°C protocols Topas® 5013L-10Topas® 5013L-10 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific. Applications of Topas® 5013L-10 include lighting applications and optics/lenses.Characteristics include: Flame Rated Copolymer
Duracon® M90-44
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
2500.0 - 2500.0 MPa
Polyplastics Group Duracon® M90-44 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive. Primary characteristic: flame rated.
Topas® 5013F-04
Polymer Name:
Cyclic Olefin Copolymer (COC)
Processing Methods:
Film Extrusion, Thermoforming, Coextrusion
Polyplastics Group Topas® 5013F-04 is a high temperature film extrusion grade for blends. It is a high clarity amorphous resin with high flow, high stiffness, moisture barrier, chemical resistance, thermoformability and purity for food and healthcare applications. It is used in monolayer cast blends, and in coextruded blends in both cast and blown processes, for a wide variety of film and sheet products requiring excellent optics in applications such as heat resistant blister, hot fill, and easy tear packaging. If performance at elevated temperatures is not required, we also offer lower glass transition temperature (Tg) grades of TOPAS.
Duracon® M90-45LV
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
2300.0 - 2300.0 MPa
Polyplastics Group Duracon® M90-45LV is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Automotive.Characteristics include: Flame Rated Weather Resistant
Topas® 9506F-04
Polymer Name:
Cyclic Olefin Copolymer (COC)
TOPAS® 9506F-04 is a Cyclic Olefin Copolymer (COC) product. It is available in Asia Pacific. Typical application: Film. Primary characteristic: copolymer.
Duranex® 3105
Polymer Name:
Polybutylene Terephthalate (PBT)
Processing Methods:
Injection Molding
Fillers Included:
Glass Fiber
Flexural Modulus:
5330.0 - 5330.0 MPa
Polyplastics Group Duranex® 3105 is a Polybutylene Terephthalate (PBT) product filled with 15% glass fiber. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.
Laperos® A430
Polymer Name:
Liquid Crystal Polymer (LCP)
Additives Included:
Lubricant (Unspecified)
Flexural Modulus:
6800.0 - 6800.0 MPa
Polyplastics Group Laperos® A430 is a Liquid Crystal Polymer (LCP) product. It is available in Asia Pacific.Characteristics include: Flame Rated High Strength High Toughness Lubricated Wear Resistant
Laperos® S135
Polymer Name:
Liquid Crystal Polymer (LCP)
Fillers Included:
Glass Fiber
Flexural Modulus:
16000.0 - 16000.0 MPa
Polyplastics Group Laperos® S135 is a Liquid Crystal Polymer (LCP) product filled with 35% glass fiber. It is available in Asia Pacific.Characteristics include: Flame Rated Heat Resistant High Stiffness
Duranex® 7407
Polymer Name:
PC/PBT Alloy
Processing Methods:
Injection Molding
Density:
1570.0 - 1570.0 kg/m³
Flexural Modulus:
9500.0 - 9500.0 MPa
Tensile Strength:
117.0 - 117.0 MPa
Polyplastics Group Duranex® 7407 is a Polycarbonate + PBT (PC+PBT) product filled with 40% glass fiber\glass flake. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Flame Rated Warp Resistant
Duracon® LW-02
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Polyplastics Group Duracon® LW-02 is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.
FR-PET® B3015FA
Polymer Name:
Polyethylene Terephthalate (PET)
Fillers Included:
Glass Fiber
Flexural Modulus:
6300.0 - 6300.0 MPa
Polyplastics Group FR-PET® B3015FA is a Polyethylene Terephthalate (PET) product filled with 15% glass fiber. It is available in Asia Pacific, Europe, or North America. Primary characteristic: flame rated.
Duracon® TF-30
Polymer Name:
Polyacetal Copolymer (POM), Polyurethane (unspecified)
Processing Methods:
Injection Molding
Density:
1350.0 - 1350.0 kg/m³
Tensile Strength:
37.0 - 37.0 MPa
Polyplastics Group Duracon® TF-30 is an Acetal (POM) Copolymer + PUR product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America.Characteristics include: Good Flexibility Impact Resistant
Duracon® TF-10LV
Polymer Name:
Polyacetal Copolymer (POM)
Processing Methods:
Injection Molding
Flexural Modulus:
1700.0 - 1700.0 MPa
Polyplastics Group Duracon® TF-10LV is an Acetal (POM) Copolymer product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Primary characteristic: good toughness.
Show
36
of 291 results
Go to page
1
2
3
4
5
6
7
8
9