Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
- Materials Features
- Product Characteristics
Nitrophor™ FR1000 is also suitable for mineral filling system and masterbatch system. Products with Nitrophor™ FR1000 can pass the tests of UL 94 V-2 (1.5mm), GWFI 850°Cand GWIT 750°C. The bromine content of the product with Nitrophor™ FR1000 could be controlled to less than 900ppm, which could meet the non-halogen requirement of IEC 61249-2- 21. The products with Nitrophor™FR1000 are characterized by low density, low smoke generation and less mold corrosion. Nitrophor™ FR1000 is especially developed for the applications of electronic appliance socket, electronic appliance structure and motor parts.
- Advantages
- Nitrophor™ FR1000 applied in Homo-PP, the lowest dosage of 1.2% could reach UL 94 V-2;
- Nitrophor™ FR1000 applied in PP, the bromine content is less than 900ppm, which could meet the non-halogen requirement;
- Nitrophor™ FR1000 applied in PP, no migration and no need of Sb2O3
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Recommended Dosage
Polymer
Homo-PP
Homo-PP
Co-PP
Co-PP
NitrophorTM FR1000 Dosage %
≥2.0
≥3.0
≥2.5
≥3.0
Mineral filler %
0
≤20
0
≤10
Flame Retarding performance UL 94
V-2
V-2
V-2
V-2
Flame Retarding performance
GWFI (850℃)
Pass
Pass
Pass
Pass
Flame Retarding performance
GWIT (750℃)
Pass
Pass
Pass
Pass
Properties
- Flame Rating
- Appearance
- White Powder
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Density | Approx. 1.7 | g/cm3 | — |
| Bromine Content | 1.0 ~ 2.5 | %（w/w） | — |
| Average Particle Size | Approx. 30 | μm | — |
| Phosphorus Content | min. 20 | %（w/w） | — |
| Water Content | max. 0.5 | %（w/w） | — |
| Whiteness | min. 90 | % | — |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Extrusion Process (Twin Screw Extruder)
Notes
- Nitrophor™ FR1000 applied in PP, some additives may be of negative effect to appearance and flame retardant properties of the resin therefore careful selection of additives should be needed (CaCO3 could not be used in this application).
- Nitrophor™ FR1000 applied in PP, strong shear screw combination is not recommended.
- Bromine plus antimony FR system or carbon black would decrease flame retarding performance of Nitrophor™ FR1000.
Packaging & Availability
- Packaging
25kg/package.
Storage & Handling
- Storage
Transported as the common chemicals. Keep in dry, cool place and avoid direct sunlight.