Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Dosage
Typical LDPE film thicknesses would be in the range of 50 to 200 microns with a typical addition rate of 0.2 to 2% for optimum performance.
The above dosages are for guidance only based on the test results from suppliers and from practical experience.
Properties
- Physical Form
- Appearance
- Off white pellets
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Carrier Resin | Polyethylene | — | — |
| Compatibility | Polyolefin | — | — |
| Active Content | 65.0 | % | — |
| Heat stability | 280.0 | °C | — |
| Density | 1.594 | g/cm³ | — |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
- Regulatory Compliance Statement
The above mentioned masterbatch is suitable for use in materials intended for use in contact with foodstuffs and in children’s toys under the following regulations: -
- Is manufactured using pigments which are in accordance with :-
- European Resolution AP (89) 1
- Recommendation IX of the BfR for coloring plastics
- EN71-3 Toy regulation
- EU regulation EU No 2019/1381 amending Regulation EU No 1935/2004
- Is based on a polymer carrier that is compliant with :-
- EU regulation EU No 2020/1245 amending and correcting Regulation (EU) No 10/2011
- EU regulation EU No 2019/1381 amending Regulation EU No 1935/2004
- Has been produced according to Regulation 2023/2006/EC on good manufacturing practice for materials and articles intended to come into contact with food, applicable to plastic raw materials.
- Is manufactured using pigments which are in accordance with :-