Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Dosage
Addition rates of 1-8% are recommended depending on application and level of protection required.
Dosage (%) Film Gage (μm) Approximate Protection (years) NE SE 25 2 4-5 - 50 2 3-4 8 75 2 2-3 6 The above dosages are for guidance only based on the test results from artificial weathering tests and from practical experience. An individual case where welding, bonding and printing may be required extensive testing is required to rule out any negative influence. Other factors not limited to thermal stabilization, other additives, places of use, processing conditions and the use of pigments and fillers may also have an influence on performance.
Properties
- Physical Form
- Appearance
- Off white pellets
- Typical Properties
Value | Units | Test Method / Conditions | |
Carrier Resin | Polyethylene | — | — |
Compatibility | Polyolefin | — | — |
Active Content | 10.0 | % | — |
Heat stability | 240.0 | °C | — |
Density | 1.215 | g/cm³ | — |
Regulatory & Compliance
- Certifications & Compliance
- Quality Standards
- Regulatory Compliance Statement
The above mentioned masterbatch when used at the recommended levels is suitable for use in materials intended for use in contact with foodstuffs and in children’s toys under the following regulations: -
- Is manufactured using pigments or additives which are in accordance with
- European Resolution AP (89) 1
- Recommendation IX of the BfR for coloring plastics
- Listed under FDA 21 CFR 178.3297
- Is manufactured using pigments or additives which are compliant to –
- EN71-3 Toy regulation
- Is based on a polymer carrier that is compliant with: -
- EU regulation 2020/1245/EC (PIM) as amended
- FDA paragraph 21 CFR 177.1520 (olefin polymers)
- Is manufactured using pigments or additives which are in accordance with