Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Product Type
- Technologies
- Product Families
Features & Benefits
- Ready-to-Use Product Features
Applications & Uses
- Applications
- Application Area
- Application Method
- Recommended Applications
PyroBreak EX13 is applied by spray, dip, roller, or brush. It imparts excellent flame retardancy to:
- Paperboard packaging, paper or corrugated paper board
- Industrial Product Structural Components
- Paperboard Air Filter Frames
- Displays and exhibits
- OSHA Qualified Flame Retardant Paper for Paint Spray Masking
NOTE: While PyroBreak EX13 functions extremely well on many materials, it does not provide flame retardancy to every fibrous substrate. The buyer accepts liability for determining whether the product is suitable for the buyer's intended use.
Properties
- Physical Form
- Odor
- Very Slight, Mild Odor
- Appearance
- Clear Liquid
- Typical Properties
| Value | Units | Test Method / Conditions | |
| Weight/gallon | 10.5 ± 0.2 | lbs. | — |
| Solid Content | 49.0 ± 1.0 | % | — |
| pH | 7.0 ± 0.2 | — | — |
| Viscosity | max. 10 | cps | — |
Regulatory & Compliance
- Certifications & Compliance
Safety & Health
- Product Safety
PyroBreak EX13 contains no solvents or hazardous chemical components. The following procedures, though, should be followed when using the product:
- Use proper breathing apparatus to protect from misting when product is applied with a sprayer.
- Flush eyes with water for at least 15 minutes if product contacts them. If irritations occurs, seek medical attention.
- Wash skin thoroughly with soap and water if product contacts it. If skin irritation occurs, seek medical attention.
- Induce vomiting and seek medical attention if product is swallowed.
Packaging & Availability
- Packaging Information
The product is available in 5-gallon pails or 55-gallon drums.
It should not be repackaged without consulting PyroTech.
Storage & Handling
- Storage and Handling
PyroBreak EX13 should be stored at temperatures above freezing and below 100 F. Should the product freeze, it can be reconstituted by warming gently to 75 F with mixing. At temperatures above 90 F, there may be a slight amount of ammonia gas released. Care should be taken when opening drums as there may be a slight pressure build up.
Wear protective mask, gloves, and safety goggles to avoid potential nasal, throat, skin, or eye irritation while applying the product by spray. While it is non-toxic, the product may cause skin irritation in certain individuals.
Stir PyroBreak EX13 before use to redisperse its components.
DO NOT SHAKE — foaming may result.Clean all equipment immediately following use with warm water and mild detergent.
PyroBreak PyroBreak EX13 is completely water soluble and, therefore, the application equipment and spills may be cleaned with water.
Clean immediately with an absorbent if PyroBreak EX13 is spilled.