Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
- Properties
- The structure of Lotrène LA0710 allows it to be used for thin gage coating at very high speeds onto various substrates.
- Lotrène LA0710 has good mechanical properties, low neck-in and excellent heat sealability. It exhibits also a good adhesion to both porous and non-porous substrates.
Applications & Uses
- Applications
- Plastics & Elastomers Processing Methods
- Processing
- Lotrène LAO710 can be easily processed on all standard extrusion coating machines. However, in order to obtain the best uniform thickness and width, it is advisable to use an extruder with an L/D ratio at least 20:1, the melt temperature is suggested to be in the range of 330-280 °C.
- The output depends on the nature of the substrate, the thickness of the coating and the temperature of the material.
- Applications
Coating and/or Lamination of: Paper
- Paper board
- Aluminum
- Cellophane film
- Photographic paper
- Polymer film
- Tarpaulin
- Paper / Aluminum
- PE Film/Aluminum
Properties
- Typical Properties
Value | Units | Test Method / Conditions | |
Density at 23°C | 0.918 | g/cm³ | ASTM D-1505 |
Melt Flow Index | 8 | g/10 min. | ASTM D-1238 |
Crystalline Melting Point | 105 | °C | ASTM E-794 |
Vicat Softening Point | 87 | °C | ASTM D-1525 |
Minimal coating weight | 6 | g/m2 | Internal |
Neck-in | 10 | % | Internal |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- Food Contact and reach
- Lotrène polyethylene products manufactured by Qatar Petrochemical Company (QAPCO) Q.S.C. comply with US, EU and other food contact legislations. Limitations may apply. All QAPCO Lotrène products are complying with REACH Regulation 1907/2006/EC. The aims of this regulation are to improve the protection of human health and the environment through better and earlier identification of the intrinsic properties of chemical substances.
Safety & Health
- Safety
- Under normal conditions Lotrène products do not present a toxic hazard through skin contact or inhalation.
Packaging & Availability
- Packaging Type
- Regional Availability
Storage & Handling
- Storage and Handling
- Polyethylene products should be stored in their original packaging or in clean appropriate silos. The products should be stored in a dry and well-ventilated area and should not be exposed to direct sunlight and or heat in any form since this may adversely affect their properties. As a general rule, our products should not be stored for more than three months from receipt date.