ROTEC ASA E 510 - Romira - Injection Molding

Identification & Functionality

Applications & Uses

Markets: Automotive & Transportation,
Building & Construction,
Consumer Goods,
Electrical & Electronics,
Healthcare & Pharma
Applications: Automotive & Transportation — Automotive
Electrical & Electronic Systems,
Exterior & Body,
Interior,
Other Automotive Applications
Building & Construction — Building Envelope & Roofing
Other Building Envelope & Roofing Applications
Building & Construction — Building Materials
Other Building Materials
Automotive & Transportation — Other Automotive & Transportation Applications
Consumer Goods — Other Consumer Goods Applications
Electrical & Electronics — Other Electrical & Electronics Applications
Healthcare & Pharma — Other Healthcare & Pharma Applications
Plastics & Elastomers Processing Methods: Extrusion,
Injection Molding

Properties

	Value	Units	Test Method / Conditions
Water Absorption (23 °C, 50 % RH, 24 h)	0.3	%	DIN EN ISO 62
Density (23 °C, 50 % RH)	1.06	g/cm³	DIN EN ISO 1133

	Value	Units	Test Method / Conditions
Elongation at Break (50 mm/min 23 °C)	20	%	DIN EN ISO 527
Flexural Modulus (2 mm/min 23 °C)	2000	MPa	DIN EN ISO 178
Flexural Strength (2 mm/min 23 °C)	57	MPa	DIN EN ISO 178
Impact Strength (Charpy)	n.b.	kJ/m²	DIN EN ISO 179/1eU
Notched Impact Strength (Charpy at 80 x 10 x 4 23 °C)	20	kJ/m²	DIN EN ISO 179/1eA
Tensile Modulus (1 mm/min 23 °C)	1900	MPa	DIN EN ISO 527
Tensile Strength (50 mm/min 23 °C)	38	MPa	DIN EN ISO 527

	Value	Units	Test Method / Conditions
Flammability (own test)	HB	—	UL94
Melt Mass-Flow Rate (MFR)	12	g/10 min	DIN EN ISO 1133
Processing Shrinkage (220 °C, 10 kg)	0.3 0.6	%	DIN EN ISO 294-4
Vicat Softening Temperature (B 50)	95	°C	DIN EN ISO 306

Regulatory & Compliance

Packaging & Availability

ROTEC® ASA E 510