LNP™ COLORCOMP™ Compound R1000S

1 of 77 products in this brand

SABIC's Specialties Business LNP COLORCOMP R1000S compound is based on Nylon 6/6 resin. Added features of this grade include: Heat Stabilized.
This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Polymer Name: Polyamide 66 (PA 66)

Processing Methods: Injection Molding

Additives Included: Heat Stabilizer

Flexural Modulus: 3200.0 - 3200.0 MPa

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Additives Included
Chemical Family
Plastics & Elastomers Functions
Technologies

Features & Benefits

Labeling Claims

Applications & Uses

Plastics & Elastomers Processing Methods

Properties

Color
Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Stress (Yield) ¹¹7.50E+01MPaISO 527
Tensile Strain (Yield) ¹¹10%ISO 527
Tensile Modulus (at 1 mm/min) ¹¹3400MPaISO 527
Flexural Stress ¹¹11MPaISO 178
Flexural Modulus ¹¹3200MPaISO 178
Physical Properties
ValueUnitsTest Method / Conditions
Density ¹¹1.23g/cm³ISO 1183
Density ¹¹1.22g/cm³ASTM D792
Thermal Properties
ValueUnitsTest Method / Conditions
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹75°CISO 75/Af
Impact Properties
ValueUnitsTest Method / Conditions
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹4kJ/m²ISO 180/1A
Injection Molding
ValueUnitsTest Method / Conditions
Drying Temperature ⁷80°C
Drying Time ⁷4Hrs
Maximum Moisture Content ⁷0.15 - 0.25%
Melt Temperature ⁷265 - 275°C
Front - Zone 3 Temperature ⁷260 - 270°C
Middle - Zone 2 Temperature ⁷255 - 265°C
Rear - Zone 1 Temperature ⁷250 - 260°C
Mold Temperature ⁷60 - 100°C
Back Pressure ⁷0.2 - 0.3MPa
Screw Speed ⁷30 - 60rpm
Note
  • ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
  • ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
 

Packaging & Availability

Regional Availability
  • Americas
  • Asia
  • Europe
  • North America