LNP™ LUBRICOMP™ Compound PFL36

Identification & Functionality

Additives Included

Heat Stabilizer,

Lubricant (PTFE),

Mold Release Agent

Chemical Family

Polyamides

Fillers Included

Glass Fiber,

PTFE

Polymer Name

Polyamide 6 (PA 6)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Polyamides

Features & Benefits

Materials Features

Friction Resistant,

Good Mold Release,

Heat Stabilized,

High Stiffness,

Wear Resistant

Applications & Uses

Markets

Building & Construction,

Consumer Goods,

Electrical & Electronics,

Personal Care,

Printing & Packaging

Applications

Consumer Goods — Appliances & Electronics

Building & Construction — Decorative Materials & Finishes

Artificial Turf

Electrical & Electronics — Devices & Assemblies

Consumer Electronics,

Displays

Consumer Goods — Lawn & Garden

Printing & Packaging — Packaging

Non-Food Consumer Packaging

Personal Care — Packaging & Accessories

Applicators & Accessories

Electrical & Electronics — Parts & Components

Connectors,

Switches & Relays

Consumer Goods — Sports & Recreation

Plastics & Elastomers End Uses

Appliances,

Building Materials,

Cell Phones,

Commercial Appliance,

Computer Components,

Consumer Applications,

Containers,

Displays,

Doors,

Electrical Components,

Electrical/Electronic Applications,

Home Appliances,

Personal Accessories,

Pool Covers,

Sporting Goods,

Tablets,

Tarpaulins,

Turf Applications,

Windows,

Wiring Devices

Plastics & Elastomers Processing Methods

Injection Molding

Properties

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Yield, 5 mm/min) ¹¹	155	MPa	ISO 527
Tensile Stress (Break, 5 mm/min) ¹¹	155	MPa	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	10200	MPa	ISO 527
Tensile Strain (Yield, 5 mm/min) ¹¹	2.9	%	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	3.2	%	ISO 527
Flexural Stress (Yield, at 2 mm/min) ¹¹	235	MPa	ISO 178
Flexural Stress (Break, 2 mm/min) ¹¹	235	MPa	ISO 178
Flexural Stress (Break, 2 mm/min) ¹¹	268	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	8600	MPa	ISO 178
Tensile Stress (Yield, Type I, 5 mm/min) ¹¹	150	MPa	ASTM D638
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	150	MPa	ASTM D638
Tensile Strain (Yield, Type I, 5 mm/min) ¹¹	2.9	%	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	3.3	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	10100	MPa	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	215	MPa	ASTM D790
Flexural Stress (Break, 1.3 mm/min, 50 mm span) ¹¹	210	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	7500	MPa	ASTM D790

Physical Properties

	Value	Units	Test Method / Conditions
Mold Shrinkage (flow, measured on 60x60x2mm plaques) ʰ ¹¹	0.1	%	SABIC method
Mold Shrinkage (xflow, measured on 60x60x2mm plaques) ʰ ¹¹	0.7	%	SABIC method
Wear Factor Washer ¹¹	18	10^-10 in^5-min/ft-lb-hr	ASTM D3702 Modified: Manual
Dynamic COF ¹¹	0.67	—	ASTM D3702 Modified: Manual
Static COF ¹¹	0.87	—	ASTM D3702 Modified: Manual

Thermal Properties

	Value	Units	Test Method / Conditions
Vicat Softening Temperature (Rate B/50) ¹¹	210	°C	ISO 306
Vicat Softening Temperature (Rate B/50) ¹¹	210	°C	ASTM D1525
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	215	°C	ISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	200	°C	ISO 75/Af
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	215	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	205	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000024	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000024	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000096	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000096	1/°C	ASTM E831

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹	12	kJ/m²	ISO 180/1A
Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹	75	kJ/m²	ISO 180/1U
Izod Impact (Notched, at 23°C) ¹¹	95	J/m	ASTM D256
Izod Impact (Unnotched, at 23°C) ¹¹	1000	J/m	ASTM D4812
Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹	11	kJ/m²	ISO 179/1eA
Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹	75	kJ/m²	ISO 179/1eU

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	80	°C	—
Drying Time ⁷	4	Hrs	—
Maximum Moisture Content ⁷	0.15 - 0.25	%	—
Melt Temperature ⁷	265 - 275	°C	—
Front - Zone 3 Temperature ⁷	275 - 290	°C	—
Middle - Zone 2 Temperature ⁷	265 - 275	°C	—
Rear - Zone 1 Temperature ⁷	250 - 260	°C	—
Mold Temperature ⁷	80 - 95	°C	—
Back Pressure ⁷	0.3 - 0.7	MPa	—
Screw Speed ⁷	30 - 60	rpm	—

Note

• ʰ Measurements made from laboratory test coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Packaging & Availability

Regional Availability

• Americas
• Asia
• Europe
• North America