LNP LUBRICOMP™ Compound - WR2210 - SABIC's Specialty

Identification & Functionality

Additives Included: Flame Retardant,
Heat Stabilizer,
Lubricant (Unspecified),
Proprietary
Chemical Family: Polycarbonate (PC)
Polymer Name: Polycarbonate (PC)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
High Performance Thermoplastics,
Polycarbonates

Features & Benefits

Labeling Claims: No Added PFAS
Materials Features: Flame Retardant,
Friction Resistant,
Heat Stabilized,
Lubricated,
No Added PFAS,
Unreinforced,
Wear Resistant

Applications & Uses

Markets: Building & Construction,
Consumer Goods,
Electrical & Electronics,
Personal Care,
Printing & Packaging
Applications: Consumer Goods — Appliances & Electronics
Building & Construction — Decorative Materials & Finishes
Artificial Turf
Electrical & Electronics — Devices & Assemblies
Consumer Electronics,
Displays
Consumer Goods — Lawn & Garden
Printing & Packaging — Packaging
Non-Food Consumer Packaging
Personal Care — Packaging & Accessories
Applicators & Accessories
Electrical & Electronics — Parts & Components
Connectors,
Switches & Relays
Consumer Goods — Sports & Recreation
Plastics & Elastomers End Uses: Appliances,
Building Materials,
Cell Phones,
Commercial Appliance,
Computer Components,
Consumer Applications,
Containers,
Displays,
Doors,
Electrical Components,
Electrical/Electronic Applications,
Garden Equipment,
Home Appliances,
Lawn Equipment,
Personal Accessories,
Pool Covers,
Sporting Goods,
Tablets,
Tarpaulins,
Turf Applications,
Windows
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Flame Rating: UL 94 HB
Mechanical Properties
Physical Properties
Thermal Properties
Electrical Properties
Impact Properties
Injection Molding
Flame Characteristics
Note: ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.

ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.

⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.

¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

¹⁷ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card. The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

	Value	Units	Test Method / Conditions
Tensile Modulus (at 5 mm/min) ¹¹	2000	MPa	ASTM D638
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹	59	MPa	ASTM D638
Tensile Stress (Break, Type I, 50 mm/min) ¹¹	62	MPa	ASTM D638
Tensile Strain (Break, Type I, 50 mm/min) ¹¹	94	%	ASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹	88	MPa	ASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	2390	MPa	ASTM D790
K-factor (xE-10, PV=2000 psi-fpm vs Steel) ¹¹	85	—	SABIC method
Coefficient of Friction (on steel, Static) ¹¹	0.17	—	ASTM D1894
Coefficient of Friction (on steel, Kinetic) ¹¹	0.21	—	ASTM D1894

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	127	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) ¹¹	127	°C	ASTM D648
Coefficient of Thermal Expansion (at 23°C to 80°C, flow) ¹¹	0.00007	1/°C	ASTM E831
Relative Temperature Index (Electrical) ᵖ ¹¹	100	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	100	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	100	°C	UL 746B
Thermal Conductivity ¹¹	0.2	W/m-°C	ISO 8302

	Value	Units	Test Method / Conditions
Hot Wire Ignition (PLC 2) ¹⁷	min. 3	mm	UL 746A
Hot Wire Ignition (PLC 4) ¹⁷	min. 1.5	mm	UL 746A
High Ampere Arc Ignition (PLC 1) ¹⁷	min. 3	mm	UL 746A
High Ampere Arc Ignition (PLC 2) ¹⁷	min. 1.5	mm	UL 746A
Comparative Tracking Index (UL, PLC) ¹⁷	3	PLC Code	UL 746A
High Voltage Arc Track Rate (PLC) ¹⁷	2	PLC Code	UL 746A
Arc Resistance (Tungsten, PLC) ¹⁷	5	PLC Code	ASTM D495

	Value	Units	Test Method / Conditions
Izod Impact (Notched, at 23°C) ¹¹	630	J/m	ASTM D256
Tensile Impact Strength (Type S) ¹¹	630	kJ/m²	ASTM D1822
Instrumented Dart Impact Energy (Peak, at 23°C) ¹¹	56	J	ASTM D3763
Izod Impact (Notched, at -20°C) ¹¹	150	J/m	ASTM D256
Izod Impact (Notched, 80104, at 23°C) ¹¹	45	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80104, at -30°C) ¹¹	20	kJ/m²	ISO 180/1A
Charpy Impact (Notched, at 23°C, 80104mm, Cut) ¹¹	35	kJ/m²	ISO 179/1eA

	Value	Units	Test Method / Conditions
UL Recognized (94HB Flame Class Rating) ᵖ	min. 1.5	mm	UL 94

Regulatory & Compliance

Packaging & Availability

LNP™ LUBRICOMP™ Compound WR2210