Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Materials Features
- Mechanical Recycling
Process
Debris are washed, melted & transformed into raw material for a new process. Focus on responsible sourcing of high-quality waste streams
Certification
Third-party certification of PCR content conducted by SCS Global Services
Value Proposition
- 21-80% post-consumer recycled content
- Meeting RoHS1 guidelines
- Provides CO2
- reduction & waste depletion options
- Non-brominated & non-chlorinated flame retardant systems
- Up to 2 extra EPEAT points can be achieved
- Broad color space, enhanced performance via
- blending with copolymers
- Drop in solution to existing tools
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Potential Applications
PC based LNP THERMOCOMP™ compounds may be qualified to use in consumer electronics, industrial applications for combination of dimensional stability, thin wall and non-Br/Cl Eco FR systems.
Properties
- Flame Rating
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Impact Properties
- Injection Molding
- Flame Characteristics
- Note
- ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
- ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
- ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
- ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
Value | Units | Test Method / Conditions | |
Tensile Strain (Break, Type I, 5 mm/min) ¹¹ | 2 | % | ASTM D638 |
Tensile Modulus (at 5 mm/min) ¹¹ | 16090 | MPa | ASTM D638 |
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹ | 13420 | MPa | ASTM D790 |
Tensile Stress (Break, 5 mm/min) ¹¹ | 147 | MPa | ISO 527 |
Tensile Strain (Break, 5 mm/min) ¹¹ | 1.35 | % | ISO 527 |
Tensile Modulus (at 1 mm/min) ¹¹ | 15270 | MPa | ISO 527 |
Value | Units | Test Method / Conditions | |
Density ¹¹ | 1.618 | g/cm³ | ASTM D792 |
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹ | 0.05 - 0.2 | % | ASTM D955 |
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹ | 0.05 - 0.2 | % | ASTM D955 |
Melt Volume Rate (at 300°C, 2.16 kg) ¹¹ | 20 | cm³/10 min | ASTM D1238 |
Melt Volume Rate (at 300°C, 5.0 kg) ¹¹ | 34.98 | cm³/10 min | ASTM D1238 |
Value | Units | Test Method / Conditions | |
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹ | 105 | °C | ASTM D648 |
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹ | 0.0000131 | 1/°C | ASTM E831 |
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹ | 0.0000424 | 1/°C | ASTM E831 |
Relative Temperature Index (Electrical) ᵖ ¹¹ | 80 | °C | UL 746B |
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹ | 80 | °C | UL 746B |
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹ | 80 | °C | UL 746B |
Value | Units | Test Method / Conditions | |
Izod Impact (Unnotched, at 23°C) ¹¹ | 423 | J/m | ASTM D4812 |
Izod Impact (Notched, at 23°C) ¹¹ | 119 | J/m | ASTM D256 |
Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹ | 31 | kJ/m² | ISO 179/1eU |
Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹ | 12 | kJ/m² | ISO 179/1eA |
Value | Units | Test Method / Conditions | |
Drying Temperature ⁷ | 110 | °C | — |
Drying Time ⁷ | 3 - 6 | Hrs | — |
Drying Time (Cumulative) ⁷ | 12 | Hrs | — |
Maximum Moisture Content ⁷ | 0.02 | % | — |
Melt Temperature ⁷ | 285 - 310 | °C | — |
Nozzle Temperature ⁷ | 285 - 305 | °C | — |
Front - Zone 3 Temperature ⁷ | 280 - 300 | °C | — |
Middle - Zone 2 Temperature ⁷ | 270 - 290 | °C | — |
Rear - Zone 1 Temperature ⁷ | 260 - 280 | °C | — |
Mold Temperature ⁷ | 80 - 110 | °C | — |
Back Pressure ⁷ | 0.1 - 0.3 | MPa | — |
Screw Speed ⁷ | 50 - 90 | rpm | — |
Value | Units | Test Method / Conditions | |
UL Recognized (94V-0 Flame Class Rating) ᵖ | min. 1 | mm | UL 94 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability