LNP™ THERMOCOMP™ Compound DC0049XF

1 of 486 products in this brand
LNP THERMOCOMP DC0049XF compound is based on Polycarbonate (PC) resin containing 20% carbon fiber. Added features of this grade include: Electrically Conductive, Flame Retardant.

Polymer Name: Polycarbonate (PC)

Processing Methods: Injection Molding

Fillers Included: Carbon Fiber

Additives Included: Flame Retardant

Flexural Modulus: 10540.0 - 10540.0 MPa

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Additives Included
Chemical Family
Fillers Included
Polymer Name
Plastics & Elastomers Functions
Technologies

Features & Benefits

Applications & Uses

Plastics & Elastomers Processing Methods

Properties

Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Stress (Break, 5 mm/min) ¹¹133MPaISO 527
Tensile Strain (Break, 5 mm/min) ¹¹1.5%ISO 527
Flexural Modulus (at 2 mm/min) ¹¹10540MPaISO 178
Tensile Modulus (at 1 mm/min) ¹¹13000MPaISO 527
Tensile Modulus (at 50 mm/min) ¹¹12640MPaASTM D638
Tensile Stress (Break, Type I, 5 mm/min) ¹¹132MPaASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹2.1%ASTM D638
Flexural Strength (at 1.3 mm/min, 50 mm span) ¹¹202MPaASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹11070MPaASTM D790
Physical Properties
ValueUnitsTest Method / Conditions
Moisture Absorption (at 23°C, 50% RH) ¹¹0.13%ISO 62
Density ¹¹1.3g/cm³ASTM D792
Specific Gravity ¹¹1.31ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹0.08%ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹0.3 - 0.5%ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹0.4 - 0.6%ASTM D955
Thermal Properties
ValueUnitsTest Method / Conditions
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹143°CISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹139°CISO 75/Af
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹143°CASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹140°CASTM D648
Coefficient of Thermal Expansion (at -30°C to 30°C, flow) ¹¹0.0000011/°CASTM D696
Coefficient of Thermal Expansion (at -30°C to 30°C, xflow) ¹¹0.0000081/°CASTM D696
Impact Properties
ValueUnitsTest Method / Conditions
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹5kJ/m²ISO 180/1A
Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹26kJ/m²ISO 180/1U
Multi-Axial Impact ¹¹1JISO 6603
Izod Impact (Notched, at 23°C) ¹¹58J/mASTM D256
Izod Impact (Unnotched, at 23°C) ¹¹462J/mASTM D4812
Injection Molding
ValueUnitsTest Method / Conditions
Drying Temperature ⁷120°C
Drying Time ⁷4Hrs
Maximum Moisture Content ⁷0.02%
Melt Temperature ⁷305 - 325°C
Front - Zone 3 Temperature ⁷320 - 330°C
Middle - Zone 2 Temperature ⁷310 - 320°C
Rear - Zone 1 Temperature ⁷295 - 305°C
Mold Temperature ⁷80 - 110°C
Back Pressure ⁷0.2 - 0.3MPa
Screw Speed ⁷30 - 60rpm
Note
  • ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
  • ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
  • ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
 

Packaging & Availability

Regional Availability
  • Americas
  • Asia
  • Europe
  • North America