LNP™ THERMOCOMP™ Compound DC004E

1 of 486 products in this brand

SABIC's Specialties Business LNP THERMOCOMP DC004E compound is based on Polycarbonate (PC) resin containing 20% carbon fiber. Added features of this grade include: Easy Molding, Electrically Conductive.
This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Polymer Name: Polycarbonate (PC)

Processing Methods: Injection Molding

Fillers Included: Carbon Fiber

Flexural Modulus: 11900.0 - 11900.0 MPa

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Chemical Family
Fillers Included
Polymer Name
Plastics & Elastomers Functions
Technologies

Features & Benefits

Labeling Claims

Applications & Uses

Plastics & Elastomers Processing Methods

Properties

Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Stress (Break, 5 mm/min) ¹¹165MPaISO 527
Tensile Strain (Break, 5 mm/min) ¹¹2.1%ISO 527
Tensile Modulus (at 1 mm/min) ¹¹12200MPaISO 527
Flexural Stress (Yield, at 2 mm/min) ¹¹227MPaISO 178
Flexural Modulus (at 2 mm/min) ¹¹11900MPaISO 178
Physical Properties
ValueUnitsTest Method / Conditions
Mold Shrinkage (on Tensile Bar, flow) ᵍ ¹¹0.1 - 0.2%SABIC method
Density ¹¹1.27g/cm³ISO 1183
Thermal Properties
ValueUnitsTest Method / Conditions
Coefficient of Thermal Expansion (at 23°C to 60°C, flow) ¹¹0.0000091/°CISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 60°C, xflow) ¹¹0.0000651/°CISO 11359-2
Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) ¹¹141°CISO 75/Bf
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹136°CISO 75/Af
Electrical Properties
ValueUnitsTest Method / Conditions
Surface Resistivity ¹¹100 - 1000ΩASTM D257
Impact Properties
ValueUnitsTest Method / Conditions
Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹40kJ/m²ISO 180/1U
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹8kJ/m²ISO 180/1A
Injection Molding
ValueUnitsTest Method / Conditions
Back Pressure ⁷0.2 - 0.3MPa
Drying Temperature ⁷120°C
Drying Time ⁷4Hrs
Front - Zone 3 Temperature ⁷320 - 330°C
Maximum Moisture Content ⁷0.02%
Melt Temperature ⁷305 - 325°C
Middle - Zone 2 Temperature ⁷310 - 320°C
Mold Temperature ⁷80 - 110°C
Rear - Zone 1 Temperature ⁷295 - 305°C
Screw Speed ⁷30 - 60rpm
Note
  • ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
  • ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
  • ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
 

Regulatory & Compliance

Certifications & Compliance

Packaging & Availability

Regional Availability
  • Americas
  • Asia
  • Europe
  • North America