LNP™ THERMOCOMP™ Compound DF002FVQ

Identification & Functionality

Additives Included

Flame Retardant,

Heat Stabilizer,

Mold Release Agent

Chemical Family

Polycarbonate (PC)

Fillers Included

Glass Fiber

Polymer Name

Polycarbonate (PC)

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Polycarbonates

Features & Benefits

Materials Features

Cost Effective,

Enhanced Electroplatability,

Excellent Dielectric Properties,

Flame Retardant,

Good Adhesion,

Good Mold Release,

Heat Stabilized,

High Stiffness,

Platable

Applications & Uses

Markets

Automotive & Transportation,

Consumer Goods,

Electrical & Electronics,

Personal Care,

Printing & Packaging

Applications

Consumer Goods — Appliances & Electronics

Automotive & Transportation — Automotive

Interior

Electrical & Electronics — Devices & Assemblies

Consumer Electronics,

Displays

Printing & Packaging — Packaging

Non-Food Consumer Packaging

Personal Care — Packaging & Accessories

Applicators & Accessories

Electrical & Electronics — Parts & Components

Connectors,

Switches & Relays

Plastics & Elastomers End Uses

Automotive Applications,

Automotive Interior Parts,

Cell Phones,

Computer Components,

Consumer Applications,

Containers,

Displays,

Electrical Components,

Electrical/Electronic Applications,

Electronic Components,

Laptop Antenna,

Mobile Phone Antenna,

Outdoor Device Antenna,

Personal Accessories,

Tablets,

Wearable Device,

Wearable Device Antenna,

Wireless Communication

Plastics & Elastomers Processing Methods

Injection Molding,

Laser Sintering (SLS)

Properties

Flame Rating

UL 94 V0

Physical Properties

	Value	Units	Test Method / Conditions
Density ¹¹	1.35	g/cm³	ASTM D792
Melt Flow Rate (at 300°C, 1.2 kgf) ¹¹	11	g/10 min	ASTM D1238
Mold Shrinkage (flow) ᵍ ¹¹	0.2 - 0.4	%	SABIC method
Mold Shrinkage (xflow) ᵍ ¹¹	0.3 - 0.5	%	SABIC method

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Break, Type I, 5 mm/min) ¹¹	60	MPa	ASTM D638
Tensile Strain (Break, Type I, 5 mm/min) ¹¹	3	%	ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹	4610	MPa	ASTM D638
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹	4300	MPa	ASTM D790
Flexural Strength (at 1.3 mm/min, 50 mm span) ¹¹	115	MPa	ASTM D790
Tensile Stress (Break, 5 mm/min) ¹¹	60	MPa	ISO 527
Tensile Strain (Break, 5 mm/min) ¹¹	3.5	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	4625	MPa	ISO 527
Flexural Modulus (at 2 mm/min) ¹¹	4100	MPa	ISO 178
Flexural Strength (at 2 mm/min) ¹¹	110	MPa	ISO 178

Thermal Properties

	Value	Units	Test Method / Conditions
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹	126	°C	ASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹	120	°C	ASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000035	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹	0.000035	1/°C	ASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000067	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹	0.000065	1/°C	ASTM E831
Relative Temperature Index (Electrical) ᵖ ¹¹	80	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	80	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	80	°C	UL 746B

Electrical Properties

	Value	Units	Test Method / Conditions
Dielectric Constant (at 1.1 GHz) ¹¹	3.15	—	SABIC method
Dissipation Factor (at 1.1 GHz) ¹¹	0.01	—	SABIC method
Dielectric Constant (at 1.9 GHz) ¹¹	3.17	—	SABIC method
Dissipation Factor (at 1.9 GHz) ¹¹	0.01	—	SABIC method
Dielectric Constant (at 5 GHz) ¹¹	3.15	—	SABIC method
Dissipation Factor (at 5 GHz) ¹¹	0.01	—	SABIC method
Dielectric Constant (at 10 GHz) ¹¹	3.17	—	SABIC method
Dissipation Factor (at 10 GHz) ¹¹	0.01	—	SABIC method
Dielectric Constant (at 20 GHz) ¹¹	3.04	—	SABIC method
Dissipation Factor (at 20 GHz) ¹¹	0.01	—	SABIC method

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Notched, at 23°C) ¹¹	100	J/m	ASTM D256
Izod Impact (Unnotched, at 23°C) ¹¹	600	J/m	ASTM D4812
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹	9	kJ/m²	ISO 180/1A
Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹	10	kJ/m²	ISO 179/1eA
Charpy Impact (at 23°C, Unnotch Edgew 80*10*4 sp=62mm) ¹¹	42	kJ/m²	ISO 179/1eU

Injection Molding

	Value	Units	Test Method / Conditions
Drying Temperature ⁷	110	°C	—
Drying Time ⁷	3 - 4	Hrs	—
Maximum Moisture Content ⁷	0.02	%	—
Melt Temperature ⁷	290 - 310	°C	—
Nozzle Temperature ⁷	285 - 310	°C	—
Front - Zone 3 Temperature ⁷	285 - 310	°C	—
Middle - Zone 2 Temperature ⁷	285 - 310	°C	—
Rear - Zone 1 Temperature ⁷	285 - 310	°C	—
Mold Temperature ⁷	100 - 130	°C	—
Back Pressure ⁷	0.1 - 0.3	MPa	—
Screw Speed ⁷	50 - 150	rpm	—

Flame Characteristics

	Value	Units	Test Method / Conditions
UL Recognized (94V-0 Flame Class Rating) ᵖ	0.8	mm	UL 94

Note

• ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
• ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
• ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Regulatory & Compliance

Certifications & Compliance

UL 94

Packaging & Availability

Country Availability

Canada,

China (Mainland),

Mexico,

USA

Regional Availability

• Americas
• Asia
• Europe
• North America