LNP™ THERMOCOMP™ Compound JF006EXZ

1 of 486 products in this brand

SABIC's Specialties Business LNP THERMOCOMP JF006EXZ compound is based on Polyethersulfone (PES) resin containing 30% glass fiber. Added features of this grade include: Easy Molding.
This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Polymer Name: Polyethersulfone (PES)

Processing Methods: Injection Molding

Fillers Included: Glass Fiber

Additives Included: Flame Retardant

Flexural Modulus: 8910.0 - 8910.0 MPa

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Additives Included
Chemical Family
Fillers Included
Plastics & Elastomers Functions
Technologies

Features & Benefits

Labeling Claims

Applications & Uses

Plastics & Elastomers Processing Methods

Properties

Flame Rating
Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Stress (Break) ¹¹145MPaISO 527
Tensile Stress (Break) ¹¹139MPaASTM D638
Tensile Strain (Break) ¹¹1.9%ISO 527
Tensile Strain (Break) ¹¹2.6%ASTM D638
Flexural Stress ¹¹209MPaISO 178
Flexural Stress ¹¹192MPaASTM D790
Flexural Modulus ¹¹9700MPaISO 178
Flexural Modulus ¹¹8910MPaASTM D790
Physical Properties
ValueUnitsTest Method / Conditions
Density ¹¹1.6g/cm³ASTM D792
Moisture Absorption (at 23°C, 50% RH, 24hrs) ¹¹0.21%ASTM D570
Mold Shrinkage (flow, 24 hrs) ᵍ ¹¹0.3 - 0.5%ASTM D955
Mold Shrinkage (xflow, 24 hrs) ᵍ ¹¹0.6 - 0.8%ASTM D955
Thermal Properties
ValueUnitsTest Method / Conditions
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹212°CASTM D648
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹213°CISO 75/Af
Relative Temperature Index (Electrical) ᵖ ¹¹190°CUL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹190°CUL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹190°CUL 746B
Impact Properties
ValueUnitsTest Method / Conditions
Izod Impact (Unnotched, at 23°C) ¹¹5.50E+02J/mASTM D4812
Izod Impact (Notched, at 23°C) ¹¹77J/mASTM D256
Instrumented Dart Impact Energy (Peak, at 23°C) ¹¹6JASTM D3763
Izod Impact (Unnotched, 80*10*4, at 23°C) ¹¹40kJ/m²ISO 180/1U
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹8kJ/m²ISO 180/1A
Injection Molding
ValueUnitsTest Method / Conditions
Drying Temperature ⁷120 - 150°C
Drying Time ⁷4Hrs
Maximum Moisture Content ⁷0.05%
Melt Temperature ⁷355 - 370°C
Front - Zone 3 Temperature ⁷370 - 380°C
Middle - Zone 2 Temperature ⁷360 - 370°C
Rear - Zone 1 Temperature ⁷345 - 355°C
Mold Temperature ⁷140 - 150°C
Back Pressure ⁷0.3 - 0.7MPa
Screw Speed ⁷60 - 100rpm
Flame Characteristics
ValueUnitsTest Method / Conditions
UL Recognized (94V-0 Flame Class Rating) ᵖ0.5mmUL 94
Note
  • ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
  • ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
  • ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
  • ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
 

Regulatory & Compliance

Certifications & Compliance

Packaging & Availability

Regional Availability
  • Americas
  • Asia
  • Europe
  • North America