NORYL™ Resin NH4030B

1 of 145 products in this brand

SABIC's Specialties Business NORYL NH4030B resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This high flow, injection moldable and extrusion grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V0 at 1.5mm along with lower smoke production upon burning and low specific gravity for light-weight parts. NORYL NH4030B resin may be an excellent candidate for rail interior, electrical conduit, cable management, and ceiling-mounted electric applications.
This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Polymer Name: PPO/PS Alloy

Processing Methods: Injection Molding

Density: 1110.0 - 1110.0 kg/m³

Flexural Modulus: 2380.0 - 2380.0 MPa

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Polymer Name
Plastics & Elastomers Functions
Technologies

Features & Benefits

Applications & Uses

Plastics & Elastomers Processing Methods

Properties

Flame Rating
Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹56MPaASTM D638
Tensile Stress (Break, Type I, 50 mm/min) ¹¹46MPaASTM D638
Tensile Strain (Yield, Type I, 50 mm/min) ¹¹4.2%ASTM D638
Tensile Strain (Break, Type I, 50 mm/min) ¹¹27.5%ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹2450MPaASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹90MPaASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹2400MPaASTM D790
Tensile Stress (Yield, 50 mm/min) ¹¹54MPaISO 527
Tensile Stress (Break, 50 mm/min) ¹¹47MPaISO 527
Tensile Strain (Break) ¹¹2.78E+01%ISO 527
Tensile Strain (Yield, 50 mm/min) ¹¹4%ISO 527
Tensile Strain (Break, 50 mm/min) ¹¹27.8%ISO 527
Tensile Modulus (at 1 mm/min) ¹¹2430MPaISO 527
Flexural Stress (Yield, at 2 mm/min) ¹¹90MPaISO 178
Flexural Modulus (at 2 mm/min) ¹¹2380MPaISO 178
Physical Properties
ValueUnitsTest Method / Conditions
Specific Gravity ¹¹1.11ASTM D792
Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹0.5 - 0.8%SABIC method
Melt Flow Rate (at 280°C, 5.0 kgf) ¹¹18.3g/10 minASTM D1238
Melt Flow Rate (at 300°C, 5.0 kgf) ¹¹42.7g/10 minASTM D1238
Density ¹¹1.11g/cm³ISO 1183
Water Absorption (at 23°C, saturated) ¹¹0.27%ISO 62-1
Moisture Absorption (at 23°C, 50% RH) ¹¹0.04%ISO 62
Melt Volume Rate (at 280°C, 5.0 kg) ¹¹17cm³/10 minISO 1133
Melt Volume Rate (at 300°C, 5.0 kg) ¹¹41cm³/10 minISO 1133
Thermal Properties
ValueUnitsTest Method / Conditions
Vicat Softening Temperature (Rate B/50) ¹¹127°CASTM D1525
Vicat Softening Temperature (Rate B/50) ¹¹127°CISO 306
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹106°CASTM D648
Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) ¹¹112°CASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹0.00008391/°CASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹0.00008391/°CISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹0.00008541/°CISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹0.00008541/°CASTM E831
Vicat Softening Temperature (Rate B/120) ¹¹128°CISO 306
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹107°CISO 75/Af
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹105°CUL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹65°CUL 746B
Relative Temperature Index (Electrical) ᵖ ¹¹105°CUL 746B
Processing Information (Sheet Extrusion)
ValueUnitsTest Method / Conditions
Adapter Temperature215 - 250°C
Barrel - Zone 1 Temperature215 - 250°C
Barrel - Zone 2 Temperature215 - 250°C
Barrel - Zone 3 Temperature215 - 250°C
Barrel - Zone 4 Temperature215 - 250°C
Die Temperature215 - 250°C
Drying Temperature95 - 105°C
Drying Time2 - 4Hrs
Drying Time (Cumulative)12Hrs
Maximum Moisture Content0.07%
Melt Temperature215 - 250°C
Roll Stack Temperature - Bottom90 - 150°C
Roll Stack Temperature - Middle90 - 150°C
Roll Stack Temperature - Top90 - 150°C
Processing Information (Profile Extrusion)
ValueUnitsTest Method / Conditions
Adapter Temperature215 - 250°C
Barrel - Zone 1 Temperature215 - 250°C
Barrel - Zone 2 Temperature215 - 250°C
Barrel - Zone 3 Temperature215 - 250°C
Barrel - Zone 4 Temperature215 - 250°C
Die Temperature215 - 250°C
Drying Temperature95 - 105°C
Drying Time2 - 4Hrs
Drying Time (Cumulative)12Hrs
Maximum Moisture Content0.07%
Melt Temperature215 - 250°C
Calibrator Temperature30 - 60°C
Hopper Temperature80 - 120°C
Water Bath Temperature30 - 50°C
Impact Properties
ValueUnitsTest Method / Conditions
Izod Impact (Notched, at 23°C) ¹¹200J/mASTM D256
Izod Impact (Notched, at -30°C) ¹¹117J/mASTM D256
Instrumented Dart Impact Total Energy (at 23°C) ¹¹46JASTM D3763
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹15kJ/m²ISO 180/1A
Izod Impact (Notched, 80*10*4, at -30°C) ¹¹11kJ/m²ISO 180/1A
Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹19kJ/m²ISO 179/1eA
Injection Molding
ValueUnitsTest Method / Conditions
Drying Temperature ⁷95 - 105°C
Drying Time ⁷2 - 4Hrs
Drying Time (Cumulative) ⁷12Hrs
Maximum Moisture Content ⁷0.07%
Melt Temperature ⁷260 - 290°C
Nozzle Temperature ⁷260 - 290°C
Front - Zone 3 Temperature ⁷250 - 290°C
Middle - Zone 2 Temperature ⁷240 - 280°C
Rear - Zone 1 Temperature ⁷225 - 275°C
Mold Temperature ⁷65 - 100°C
Back Pressure ⁷0.3 - 0.7MPa
Screw Speed ⁷20 - 100rpm
Shot to Cylinder Size ⁷30 - 70%
Vent Depth ⁷0.038 - 0.051mm
Flame Characteristics
ValueUnitsTest Method / Conditions
UL Recognized (94V-0 Flame Class Rating) ʳmin. 1.5mmUL 94
Flame Spread Index (at 1.52mm) ʳ15ASTM E162
Vertical Burn A (at 60s, 1.52mm, passes) ʳ0SecondsFAR 25.853
Vertical Burn B (at 12s, 1.52mm, passes) ʳ4SecondsFAR 25.853
NBS Smoke Density (Flaming, 4 min, 1.52mm) ʳ29ASTM E662
NBS Smoke Density (Flaming, 4 min, 3.2mm) ʳ35ASTM E662
NBS Smoke Density (Flaming, 20 min, 3.2mm) ʳ126ASTM E662
Draeger Tube Toxicity, Non-Flaming (at 1.52mm) ʳPassAITM 3.0005, ABD0031
NBS Smoke Density (Non-Flaming, 4 min, 1.52mm) ʳ7ASTM E662
Draeger Tube Toxicity, Flaming (at 1.52mm) ʳPassAITM 3.0005, ABD0031
Note
  • ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
  • ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
  • ʳ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses, colors and regions. For details, please see the UL Yellow Card.
  • ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
  • ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
 

Regulatory & Compliance

Certifications & Compliance

Packaging & Availability

Regional Availability
  • Americas
  • Asia
  • Europe
  • North America