NORYL™ Resin NH5120

1 of 145 products in this brand

SABIC's Specialties Business NORYL NH5120 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V1 at 1.5mm.

NORYL NH5120 resin offers a good balance of heat, flow, hydrolytic stability, low creep and dimensional stability along with mechanical property retention in tough outdoor environments.

This material is an excellent candidate for:

  • Outdoor housings / enclosures
  • HVAC components
  • Photovoltaic / solar junction box applications.

Features

  • Amorphous
  • Dimensional Stability
  • Flame Retardant
  • High Hydrolytic Stability
  • Low Moisture Absorption
  • Low Shrinkage
  • Low Specific Gravity
  • Low Warpage
  • Non-Halogenated
  • Unreinforced

Applications

  • Automotive Electronics
  • Consumer Electronics
  • Displays
  • Medical Devices & Assemblies
  • Circuit Breakers
  • Connectors
  • Switches & Relays
  • Renewable Energy

This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Polymer Name: PPO/PS Alloy

Processing Methods: Injection Molding

Density: 1100.0 - 1100.0 kg/m³

Flexural Modulus: 2610.0 - 2610.0 MPa

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Polymer Name
Plastics & Elastomers Functions
Technologies

Features & Benefits

Applications & Uses

Composites End Use
Plastics & Elastomers Processing Methods

Properties

Flame Rating
Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹66MPaASTM D638
Tensile Stress (Break, Type I, 50 mm/min) ¹¹52MPaASTM D638
Tensile Strain (Yield, Type I, 50 mm/min) ¹¹4.5%ASTM D638
Tensile Strain (Break, Type I, 50 mm/min) ¹¹29%ASTM D638
Tensile Modulus (at 50 mm/min) ¹¹2610MPaASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹105MPaASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹2680MPaASTM D790
Tensile Stress (Yield, 50 mm/min) ¹¹65MPaISO 527
Tensile Stress (Break, 50 mm/min) ¹¹57MPaISO 527
Tensile Strain (Yield, 50 mm/min) ¹¹4.4%ISO 527
Tensile Strain (Break, 50 mm/min) ¹¹9.2%ISO 527
Tensile Modulus (at 1 mm/min) ¹¹2650MPaISO 527
Flexural Stress (Yield, at 2 mm/min) ¹¹105MPaISO 178
Flexural Modulus (at 2 mm/min) ¹¹2610MPaISO 178
Physical Properties
ValueUnitsTest Method / Conditions
Specific Gravity ¹¹1.1ASTM D792
Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹0.5 - 0.7%SABIC method
Melt Flow Rate (at 280°C, 5.0 kgf) ¹¹12.2g/10 minASTM D1238
Density ¹¹1.08g/cm³ISO 1183
Water Absorption (at 23°C, saturated) ¹¹0.25%ISO 62-1
Moisture Absorption (at 23°C, 50% RH) ¹¹0.05%ISO 62
Melt Volume Rate (at 280°C, 5.0 kg) ¹¹11cm³/10 minISO 1133
Thermal Properties
ValueUnitsTest Method / Conditions
Vicat Softening Temperature (Rate B/50) ¹¹136°CASTM D1525
Vicat Softening Temperature (Rate B/50) ¹¹136°CISO 306
Heat Deflection Temperature (at 0.45 MPa, 3.2 mm, Unannealed) ¹¹131°CASTM D648
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹116°CASTM D648
Heat Deflection Temperature (at 0.45 MPa, 6.4 mm, Unannealed) ¹¹134°CASTM D648
Heat Deflection Temperature (at 1.82 MPa, 6.4 mm, Unannealed) ¹¹123°CASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹0.0000811/°CASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹0.0000811/°CISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹0.0000771/°CASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹0.0000771/°CISO 11359-2
Vicat Softening Temperature (Rate B/120) ¹¹138°CISO 306
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹118°CISO 75/Af
Relative Temperature Index (Electrical) ᵖ ¹¹110°CUL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹105°CUL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹110°CUL 746B
Electrical Properties
ValueUnitsTest Method / Conditions
Comparative Tracking Index (UL, PLC) ¹¹2PLC CodeUL 746A
High Ampere Arc Ignition (PLC 0) ¹¹min. 1.5mmUL 746A
Hot Wire Ignition (PLC 1) ¹¹min. 1.5mmUL 746A
High Voltage Arc Track Rate (PLC) ¹¹4PLC CodeUL 746A
Arc Resistance (Tungsten, PLC) ¹¹6PLC CodeASTM D495
Impact Properties
ValueUnitsTest Method / Conditions
Izod Impact (Notched, at 23°C) ¹¹186J/mASTM D256
Izod Impact (Notched, at -30°C) ¹¹111J/mASTM D256
Instrumented Dart Impact Total Energy (at 23°C) ¹¹53JASTM D3763
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹15kJ/m²ISO 180/1A
Izod Impact (Notched, 80*10*4, at -30°C) ¹¹12kJ/m²ISO 180/1A
Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹17kJ/m²ISO 179/1eA
Injection Molding
ValueUnitsTest Method / Conditions
Drying Temperature ⁷105 - 110°C
Drying Time ⁷3 - 4Hrs
Drying Time (Cumulative) ⁷8Hrs
Maximum Moisture Content ⁷0.02%
Melt Temperature ⁷280 - 310°C
Nozzle Temperature ⁷280 - 310°C
Front - Zone 3 Temperature ⁷270 - 310°C
Middle - Zone 2 Temperature ⁷260 - 305°C
Rear - Zone 1 Temperature ⁷250 - 300°C
Mold Temperature ⁷75 - 105°C
Back Pressure ⁷0.3 - 0.7MPa
Screw Speed ⁷20 - 100rpm
Shot to Cylinder Size ⁷30 - 70%
Flame Characteristics
ValueUnitsTest Method / Conditions
UL Recognized (94V-1 Flame Class Rating) ʳmin. 1.5mmUL 94
Glow Wire Ignitability Temperature (at 1.0 mm) ʳ725°CIEC 60695-2-13
Glow Wire Ignitability Temperature (at 1.5 mm) ʳ725°CIEC 60695-2-13
Glow Wire Ignitability Temperature (at 2.0 mm) ʳ700°CIEC 60695-2-13
Glow Wire Ignitability Temperature (at 3.0 mm) ʳ750°CIEC 60695-2-13
Glow Wire Flammability Index (at 1 mm) ʳ960°CIEC 60695-2-12
Glow Wire Flammability Index (at 1.5 mm) ʳ960°CIEC 60695-2-12
Glow Wire Flammability Index (at 2 mm) ʳ960°CIEC 60695-2-12
Glow Wire Flammability Index (at 3 mm) ʳ960°CIEC 60695-2-12
Note
  • ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
  • ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
  • ʳ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses, colors and regions. For details, please see the UL Yellow Card.
  • ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
  • ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
 

Regulatory & Compliance

Certifications & Compliance

Packaging & Availability

Regional Availability
  • Americas
  • Asia
  • Europe
  • Global
  • North America