NORYL™ Resin NH6010B

1 of 145 products in this brand

SABIC's Specialties Business NORYL NH6010B resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS). This high performance, injection moldable and extrusion grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of V0 at 1.5mm. NORYL NH6010B resin features low smoke production upon burning, high heat resistance, very low specific gravity, and compliance to IEC. In addition, this material is heat stabilized and impact modified. It is an excellent candidate for conduit and trunking applications in transportation, building + construction, and electrical markets. *see NORYL LS6010 resin for FAR 25.853 requirements.
This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

Polymer Name: PPO/PS Alloy

Processing Methods: Extrusion, Injection Molding

Density: 1110.0 - 1110.0 kg/m³

Flexural Modulus: 2360.0 - 2360.0 MPa

Technical Data Sheet

Knowde Enhanced TDS

Identification & Functionality

Polymer Name
Plastics & Elastomers Functions
Technologies

Features & Benefits

Applications & Uses

Plastics & Elastomers Processing Methods

Properties

Flame Rating
Mechanical Properties
ValueUnitsTest Method / Conditions
Tensile Stress (Yield, Type I, 50 mm/min) ¹¹64MPaASTM D638
Tensile Stress (Break, Type I, 50 mm/min) ¹¹53MPaASTM D638
Tensile Strain (Yield, Type I, 50 mm/min) ¹¹4.6%ASTM D638
Tensile Strain (Break, Type I, 50 mm/min) ¹¹20%ASTM D638
Tensile Modulus (at 5 mm/min) ¹¹2220MPaASTM D638
Flexural Stress (Yield, 1.3 mm/min, 50 mm span) ¹¹100MPaASTM D790
Flexural Modulus (at 1.3 mm/min, 50 mm span) ¹¹2390MPaASTM D790
Tensile Stress (Yield, 50 mm/min) ¹¹64MPaISO 527
Tensile Stress (Break, 50 mm/min) ¹¹58MPaISO 527
Tensile Strain (Yield, 50 mm/min) ¹¹4.7%ISO 527
Tensile Strain (Break, 50 mm/min) ¹¹8.3%ISO 527
Tensile Modulus (at 1 mm/min) ¹¹2440MPaISO 527
Flexural Stress (Yield, at 2 mm/min) ¹¹100MPaISO 178
Flexural Modulus (at 2 mm/min) ¹¹2360MPaISO 178
Physical Properties
ValueUnitsTest Method / Conditions
Specific Gravity ¹¹1.11ASTM D792
Mold Shrinkage (flow, 3.2 mm) ᵍ ¹¹0.5 - 0.8%SABIC method
Melt Flow Rate (at 280°C, 5.0 kgf) ¹¹5.6g/10 minASTM D1238
Density ¹¹1.11g/cm³ISO 1183
Water Absorption (at 23°C, saturated) ¹¹0.2%ISO 62-1
Moisture Absorption (at 23°C, 50% RH) ¹¹0.05%ISO 62
Melt Volume Rate (at 280°C, 5.0 kg) ¹¹5cm³/10 minISO 1133
Thermal Properties
ValueUnitsTest Method / Conditions
Vicat Softening Temperature (Rate B/50) ¹¹143°CASTM D1525
Vicat Softening Temperature (Rate B/50) ¹¹143°CISO 306
Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) ¹¹122°CASTM D648
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹0.0000671/°CASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, flow) ¹¹0.0000671/°CISO 11359-2
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹0.0000671/°CASTM E831
Coefficient of Thermal Expansion (at -40°C to 40°C, xflow) ¹¹0.0000671/°CISO 11359-2
Vicat Softening Temperature (Rate B/120) ¹¹146°CISO 306
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹124°CISO 75/Af
Relative Temperature Index (Electrical) ᵖ ¹¹130°CUL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹65°CUL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹130°CUL 746B
Electrical Properties
ValueUnitsTest Method / Conditions
Volume Resistivity ¹¹7.62E+17Ω.cmASTM D257
Volume Resistivity ¹¹7.62E+17Ω.cmIEC 60093
Surface Resistivity ¹¹1.25E+18ΩASTM D257
Dielectric Strength (in oil, at 3.2mm) ¹¹34.1kV/mmASTM D149
Dielectric Strength (in oil, at 3.2mm) ¹¹34.1kV/mmIEC 60243-1
Relative Permittivity (1 MHz) ¹¹2.7IEC 60250
Relative Permittivity (1 MHz) ¹¹2.78ASTM D150
Dissipation Factor (at at 1 MHz) ¹¹0.0029ASTM D150
Dissipation Factor (at at 1 MHz) ¹¹0.0029IEC 60250
Surface Resistivity (ROA) ¹¹1.25E+18ΩIEC 60093
Comparative Tracking Index ʳ ¹¹225VIEC 60112
High Ampere Arc Ignition (PLC 2) ¹¹min. 1.5mmUL 746A
Hot Wire Ignition (PLC 2) ¹¹min. 1.5mmUL 746A
Processing Information (Sheet Extrusion)
ValueUnitsTest Method / Conditions
Adapter Temperature220 - 260°C
Barrel - Zone 1 Temperature220 - 260°C
Barrel - Zone 2 Temperature220 - 260°C
Barrel - Zone 3 Temperature220 - 260°C
Barrel - Zone 4 Temperature220 - 260°C
Die Temperature220 - 260°C
Drying Temperature95 - 105°C
Drying Time2 - 4Hrs
Drying Time (Cumulative)12Hrs
Maximum Moisture Content0.07%
Melt Temperature220 - 260°C
Roll Stack Temperature - Bottom90 - 150°C
Roll Stack Temperature - Middle90 - 150°C
Roll Stack Temperature - Top90 - 150°C
Processing Information (Profile Extrusion)
ValueUnitsTest Method / Conditions
Adapter Temperature220 - 260°C
Barrel - Zone 1 Temperature220 - 260°C
Barrel - Zone 2 Temperature220 - 260°C
Barrel - Zone 3 Temperature220 - 260°C
Barrel - Zone 4 Temperature220 - 260°C
Die Temperature220 - 260°C
Drying Temperature95 - 105°C
Drying Time2 - 4Hrs
Drying Time (Cumulative)12Hrs
Maximum Moisture Content0.07%
Melt Temperature220 - 260°C
Calibrator Temperature30 - 60°C
Hopper Temperature80 - 120°C
Water Bath Temperature30 - 50°C
Impact Properties
ValueUnitsTest Method / Conditions
Izod Impact (Notched, at 23°C) ¹¹300J/mASTM D256
Izod Impact (Notched, at -30°C) ¹¹181J/mASTM D256
Instrumented Dart Impact Total Energy (at 23°C) ¹¹52JASTM D3763
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹18kJ/m²ISO 180/1A
Izod Impact (Notched, 80*10*4, at -30°C) ¹¹14kJ/m²ISO 180/1A
Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹20kJ/m²ISO 179/1eA
Injection Molding
ValueUnitsTest Method / Conditions
Drying Temperature ⁷95 - 105°C
Drying Time ⁷2 - 4Hrs
Drying Time (Cumulative) ⁷12Hrs
Melt Temperature ⁷280 - 305°C
Nozzle Temperature ⁷295 - 305°C
Front - Zone 3 Temperature ⁷295 - 305°C
Middle - Zone 2 Temperature ⁷290 - 300°C
Rear - Zone 1 Temperature ⁷280 - 295°C
Mold Temperature ⁷65 - 100°C
Screw Speed ⁷40 - 80rpm
Shot to Cylinder Size ⁷30 - 70%
Flame Characteristics
ValueUnitsTest Method / Conditions
UL Recognized (94V-0 Flame Class Rating) ʳmin. 1.5mmUL 94
Glow Wire Flammability Index (at 1 mm) ʳ960°CIEC 60695-2-12
Glow Wire Flammability Index (at 1.5 mm) ʳ960°CIEC 60695-2-12
Glow Wire Flammability Index (at 2 mm) ʳ960°CIEC 60695-2-12
Glow Wire Flammability Index (at 3 mm) ʳ960°CIEC 60695-2-12
Glow Wire Ignitability Temperature (at 1.0 mm) ʳ775°CIEC 60695-2-13
Glow Wire Ignitability Temperature (at 1.5 mm) ʳ775°CIEC 60695-2-13
Glow Wire Ignitability Temperature (at 2.0 mm) ʳ775°CIEC 60695-2-13
Glow Wire Ignitability Temperature (at 3.0 mm) ʳ800°CIEC 60695-2-13
M1 Flame Class Rating ʳ2mmNF P 92501
Flame Spread Index (at 1.52mm) ʳ15ASTM E162
NBS Smoke Density (Flaming, 4 min, 1.52mm) ʳ30ASTM E662
NBS Smoke Density (Flaming, 4 min, 3.2mm) ʳ30ASTM E662
NBS Smoke Density (Flaming, 20 min, 3.2mm) ʳ120ASTM E662
NBS Smoke Density (Non-Flaming, 4 min, 1.52mm) ʳ7ASTM E662
Oxygen Index (LOI) ʳ33%ISO 4589
Toxicity ʳ0ISO 5659-2
Toxicity (at 3 mm) ʳ21.76NF X70-100
F1 Class Smoke and Toxicity Rating ʳ3mmNF F16-101
Ds (at 4min) ʳ70ISO 5659-2
Heat Release (MAHRE) ʳ33.6kW/m²ISO 5660-1
Lateral Flame Spread (CFE) ʳ20kW/m²ISO 5658-2
Note
  • ᵍ Measurements made from Laboratory test Coupon. Actual shrinkage may vary outside of range due to differences in processing conditions, equipment, part geometry and tool design. It is recommended that mold shrinkage studies be performed with surrogate or legacy tooling prior to cutting tools for new molded article.
  • ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
  • ʳ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses, colors and regions. For details, please see the UL Yellow Card.
  • ⁷ Injection Molding parameters are only mentioned as general guidelines. These may not apply or may need adjustment in specific situations such as low shot sizes, large part molding, thin wall molding and gas-assist molding.
  • ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.
 

Regulatory & Compliance

Certifications & Compliance

Packaging & Availability

Regional Availability
  • Americas
  • Asia
  • Europe
  • North America