NORYL™ Resin NH5110E

Identification & Functionality

Additives Included

Flame Retardant,

Heat Stabilizer,

Impact Modifier

Polymer Name

PPO/PS Alloy

Plastics & Elastomers Functions

Resin

Technologies

Plastics

Product Families

Plastics — Engineering & Specialty Polymers

Blends & Alloys

Features & Benefits

Labeling Claims

Bromine-free,

Chlorine-free

Materials Features

Amorphous,

Dimensional Stability,

Flame Retardant,

Good Extrusion Properties,

Heat Stabilized,

High Hydrolytic Stability,

Impact Modified,

Low Moisture Absorption,

Low Shrinkage,

Low Specific Gravity,

Low Warpage,

Non-Halogenated,

Non-brominated,

Non-chlorinated,

Unreinforced

Applications & Uses

Markets

Building & Construction,

Electrical & Electronics

Applications

Building & Construction — Building Materials

Pipes & Plumbing

Electrical & Electronics — Parts & Components

Circuit Breakers,

Conduits & Cable Management,

Connectors,

Housings & Enclosures,

Switches & Relays

Plastics & Elastomers End Uses

Cable Management Systems,

Circuit Protection,

Conduit,

Connectors,

Electrical Components,

Electrical/Electronic Applications,

Electronic Components,

Enclosure,

Fittings,

Miniature Circuit Breakers,

Pipes,

Relay Bases,

Switches

Plastics & Elastomers Processing Methods

Extrusion,

Profile Extrusion

Properties

Flame Rating

UL 94 V1

Mechanical Properties

	Value	Units	Test Method / Conditions
Tensile Stress (Yield, 50 mm/min) ¹¹	64	MPa	ISO 527
Tensile Stress (Break, 50 mm/min) ¹¹	52	MPa	ISO 527
Tensile Strain (Yield, 50 mm/min) ¹¹	4	%	ISO 527
Tensile Strain (Break, 50 mm/min) ¹¹	18	%	ISO 527
Tensile Modulus (at 1 mm/min) ¹¹	2500	MPa	ISO 527
Flexural Stress (Yield, at 2 mm/min) ¹¹	98	MPa	ISO 178
Flexural Modulus (at 2 mm/min) ¹¹	2400	MPa	ISO 178

Physical Properties

	Value	Units	Test Method / Conditions
Density ¹¹	1.09	g/cm³	ISO 1183
Water Absorption (at 23°C, saturated) ¹¹	0.15	%	ISO 62-1
Moisture Absorption (at 23°C, 50% RH) ¹¹	0.06	%	ISO 62
Melt Volume Rate (at 280°C, 5.0 kg) ¹¹	9	cm³/10 min	ISO 1133

Thermal Properties

	Value	Units	Test Method / Conditions
Coefficient of Thermal Expansion (at 23°C to 80°C, flow) ¹¹	0.000082	1/°C	ASTM E831
Coefficient of Thermal Expansion (at 23°C to 80°C, flow) ¹¹	0.000082	1/°C	ISO 11359-2
Coefficient of Thermal Expansion (at 23°C to 80°C, xflow) ¹¹	0.000094	1/°C	ASTM E831
Coefficient of Thermal Expansion (at 23°C to 80°C, xflow) ¹¹	0.000094	1/°C	ISO 11359-2
Ball Pressure Test (at 123°C to 127°C) ¹¹	Pass	—	IEC 60695-10-2
Vicat Softening Temperature (Rate B/50) ¹¹	149	°C	ISO 306
Vicat Softening Temperature (Rate B/120) ¹¹	138	°C	ISO 306
Heat Deflection Temperature/Be (at 0.45MPa, Edgew 120*10*4, sp=100mm) ¹¹	129	°C	ISO 75/Be
Heat Deflection Temperature/Af (at 1.8 Mpa, Flatw 80*10*4, sp=64mm) ¹¹	114	°C	ISO 75/Af
Relative Temperature Index (Electrical) ᵖ ¹¹	65	°C	UL 746B
Relative Temperature Index (Mechanical with impact) ᵖ ¹¹	65	°C	UL 746B
Relative Temperature Index (Mechanical without impact) ᵖ ¹¹	65	°C	UL 746B

Electrical Properties

	Value	Units	Test Method / Conditions
Relative Permittivity (1 MHz) ¹¹	2.6	—	IEC 60250
Relative Permittivity (1 MHz) ¹¹	2.6	—	ASTM D150
Dissipation Factor (at at 1 MHz) ¹¹	0.0017	—	ASTM D150
Dissipation Factor (at at 1 MHz) ¹¹	0.0017	—	IEC 60250
Dielectric Strength (shorttime, at 1mm) ¹¹	46	kV/mm	IEC 60243-1

Processing Information (Profile Extrusion)

	Value	Units	Test Method / Conditions
Adapter Temperature	240 - 260	°C	—
Barrel - Zone 1 Temperature	220 - 240	°C	—
Barrel - Zone 2 Temperature	230 - 250	°C	—
Barrel - Zone 3 Temperature	240 - 260	°C	—
Barrel - Zone 4 Temperature	240 - 260	°C	—
Calibrator Temperature	50 - 70	°C	—
Die Temperature	240 - 260	°C	—
Drying Temperature	80 - 90	°C	—
Drying Time	2 - 3	Hrs	—
Hopper Temperature	40 - 60	°C	—
Melt Temperature	240 - 260	°C	—

Impact Properties

	Value	Units	Test Method / Conditions
Izod Impact (Notched, 80*10*4, at 23°C) ¹¹	24	kJ/m²	ISO 180/1A
Izod Impact (Notched, 80*10*4, at -30°C) ¹¹	9	kJ/m²	ISO 180/1A
Charpy Impact (at 23°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹	26	kJ/m²	ISO 179/1eA
Charpy Impact (at -30°C, V-notch Edgew 80*10*4 sp=62mm) ¹¹	11	kJ/m²	ISO 179/1eA

Flame Characteristics

	Value	Units	Test Method / Conditions
UL Recognized (94V-1 Flame Class Rating) ʳ	1.5	mm	UL 94
Oxygen Index (LOI) ʳ	34	%	ISO 4589

Note

• ᵖ UL ratings shown on the technical datasheet might not cover the full range of thicknesses and colors. For details, please see the UL Yellow Card.
• ʳ UL Ratings shown on the technical datasheet might not cover the full range of thicknesses, colors and regions. For details, please see the UL Yellow Card.
• ¹¹ The information stated on Technical Datasheets should be used as indicative only for material selection purposes and not be utilized as specification or used for part or tool design.

 

Regulatory & Compliance

Certifications & Compliance

UL 94

Packaging & Availability

Regional Availability

• Europe