Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
Features & Benefits
- Labeling Claims
- Materials Features
- Key Attributes
SILTEM™ resin is an amber, transparent, siloxane polyetherimide block copolymer, offering a tailorable combination of strength, flexibility and heat resistance. It may be an option for high performance wire coating solutions meeting high industry and regulatory standards:
- Non fluorinated
- Flexibility - no cracking
- Abrasion resistance
- High heat performance
- Potential Benefits of SILTEM™ Resin
- Non-fluorinated, PFAS-free
- Compliant with flame, smoke and toxicity regulations (FAR 25.853)
- Compliant with certain transportation and infrastructure regulations
- Process and cost efficiency (vs fluoropolymers)
- Ease of processing
- Low corrosiveness, improved cost of ownership
- Low density, lower weight parts
- Durable in a range of harsh environments
- Durability with high service temperatures
- UV stable
- Excellent chemical resistance
- Highly durable in high-radiation environments
- Non-fluorinated, PFAS-free
- SILTEM™ Resin Material Properties
SILTEM™ resin is an amorphous polyetherimidesiloxane (PEI-Si) copolymer that is easily extrudable. The combination of silicone elastomer (Si) with ULTEM™ resin (PEI) provides flexibility with high heat performance.
- Lower Heat
- Higher Flexibility
- Radiation resistance
- Chemical resistance
- UV resistance
- Product Highlights
Fluoropolymers such as ETFE, FEP and PVDF are used in diverse applications due to their durability (heat, chemical, UV resistance) and flexibility. However, many of these products have come under global regulatory pressure due to the use of fluorosurfactants (PFAS) and their negative impact to the environmental footprint. Non-halogenated and PFAS-free SILTEM™ resins provide excellent high-heat performance, processability and durability without using fluorosurfactants. These advanced materials can be considered for potential use in a variety of industries and applications including transportation, aerospace and telecommunication cables/wires.
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Flame Rating
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Electrical Properties
- Impact Properties
- Injection Molding
- Flame Characteristics
- Wire Coating Extrusion
| Value | Units | Test Method / Conditions | |
| Hardness (Shore D) | 80 | — | ASTM D2240 |
| Tensile Stress (Yield, Type I, 5 mm/min) | 62 | MPa | ASTM D638 |
| Tensile Stress (Break, Type I, 5 mm/min) | 53 | MPa | ASTM D638 |
| Tensile Strain (Yield, Type I, 5 mm/min) | 5 | % | ASTM D638 |
| Tensile Stress (Yield, 50 mm/min) | 68 | MPa | ISO 527 |
| Tensile Strain (Break, Type I, 5 mm/min) | 20 | % | ASTM D638 |
| Tensile Stress (Break, 50 mm/min) | 59 | MPa | ISO 527 |
| Tensile Modulus (at 5 mm/min) | 2400 | MPa | ASTM D638 |
| Tensile Strain (Yield, 50 mm/min) | 5 | % | ISO 527 |
| Tensile Strain (Break, 50 mm/min) | 15 | % | ISO 527 |
| Flexural Stress (Yield, 1.3 mm/min, 50 mm span) | 94 | MPa | ASTM D790 |
| Tensile Modulus (at 1 mm/min) | 2300 | MPa | ISO 527 |
| Flexural Stress (Yield, at 2 mm/min) | 98 | MPa | ISO 178 |
| Flexural Modulus (at 1.3 mm/min, 50 mm span) | 2150 | MPa | ASTM D790 |
| Flexural Modulus (at 2 mm/min) | 2000 | MPa | ISO 178 |
| Flexural Modulus | 2150 | MPa | ASTM D790 |
| Flexural Stress | 94 | MPa | ASTM D790 |
| Taber Abrasion (CS-17, 1 kg) | 50 | mg/1000cy | ASTM D1044 |
| Tear Strength (at 1.6mm) | 37 | N/mm | ISO 34 (Method A) |
| Value | Units | Test Method / Conditions | |
| Mold Shrinkage (flow, 3.2 mm) | 0.87 - 0.92 | % | SABIC method |
| Melt Flow Rate (at 295°C, 6.6 kgf) | 7 | g/10 min | ASTM D1238 |
| Water Absorption (at 23°C, saturated) | 0.76 | % | ISO 62-1 |
| Matrix Tg | 200 | °C | DMA |
| Density | 1.2 | g/cm³ | ISO 1183 |
| Specific Gravity | 1.2 | — | ASTM D792 |
| Value | Units | Test Method / Conditions | |
| Vicat Softening Temperature (Rate B/120) | 180 | °C | ISO 306 |
| Heat Deflection Temperature/Bf (at 0.45 Mpa, Flatw 80*10*4, sp=64mm) | 164 | °C | ISO 75/Bf |
| Heat Deflection Temperature (at 1.82 MPa, 3.2mm, Unannealed) | 145 | °C | ASTM D648 |
| Value | Units | Test Method / Conditions | |
| Relative Permittivity (1 MHz) | 3.04 | — | ASTM D150 |
| Relative Permittivity (100 Hz) | 3.13 | — | ASTM D150 |
| Relative Permittivity (100 kHz) | 3 | — | ASTM D150 |
| Surface Resistivity | min. 1.E+15 | Ω | ASTM D257 |
| Volume Resistivity | min. 1.E+16 | Ω.cm | ASTM D257 |
| Dielectric Strength (in oil, at 3.2mm) | 16.7 | kV/mm | ASTM D149 |
| Dissipation Factor (at 100 Hz) | 0.011 | — | ASTM D150 |
| Dissipation Factor (at 100 kHz) | 0.0061 | — | ASTM D150 |
| Dissipation Factor (at at 1 MHz) | 0.0054 | — | ASTM D150 |
| Value | Units | Test Method / Conditions | |
| Izod Impact (Notched, 80*10*4, at 23°C) | 16 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, 80*10*4, at -30°C) | 8 | kJ/m² | ISO 180/1A |
| Izod Impact (Notched, at 23°C) | 175 | J/m | ASTM D256 |
| Value | Units | Test Method / Conditions | |
| Drying Temperature | 105 | °C | — |
| Drying Time | 4 - 6 | Hrs | — |
| Maximum Moisture Content | 0.02 | % | — |
| Melt Temperature | 320 - 330 | °C | — |
| Screw Speed | 50 - 100 | rpm | — |
| Back Pressure | 0.3 - 0.7 | MPa | — |
| Drying Time (Cumulative) | 8 | Hrs | — |
| Front - Zone 3 Temperature | 320 - 330 | °C | — |
| Middle - Zone 2 Temperature | 320 - 330 | °C | — |
| Mold Temperature | 110 - 120 | °C | — |
| Nozzle Temperature | 320 - 330 | °C | — |
| Rear - Zone 1 Temperature | 320 - 330 | °C | — |
| Shot to Cylinder Size | 40 - 60 | % | — |
| Vent Depth | 0.025 - 0.076 | mm | — |
| Value | Units | Test Method / Conditions | |
| Oxygen Index (LOI) | 48 | % | ASTM D2863 |
| UL Compliant (94V-0 Flame Class Rating) | 1.6 | mm | UL 94 by SABIC-IP |
| Value | Units | Test Method / Conditions | |
| Drying Temperature | 110 - 130 | °C | — |
| Drying Time | 4 - 6 | Hrs | — |
| Maximum Moisture Content | 0.02 | % | — |
| Melt Temperature | 330 - 360 | °C | — |
| Screw Speed | 5 - 50 | rpm | — |
| Compression Ratio | 2.1:1 to 2.7:1 | — | — |
| Conductor Pre-heat Temperature | 100 - 150 | °C | — |
| Cross-head Temperature | 330 - 360 | °C | — |
| Die Temperature | 330 - 360 | °C | — |
| Extruder Length/Diameter Ratio (L/D) | 22:1 to 28:1 | — | — |
| Feed Zone Temperature | 310 - 340 | °C | — |
| Head Zone Temperature | 330 - 360 | °C | — |
| Middle Zone Temperatures | 320 - 350 | °C | — |
| Neck Temperature | 330 - 360 | °C | — |
| Screen Pack | 100 - 200 | — | — |
| Water Bath Temperature | 70 - 90 | °C | — |
| Feed - Compression Metering | 40308 | D | — |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Regional Availability