SACHEM Inc.

Saskine™ 50N (ethylhexylglycerin with naringenin) can be used in a broad range of cosmetic applications. Saskine™ 50N is a very effective active component in deodorants and finds important use in preservative formulations due to its inhibiting effect on the growth of odor-causing bacteria while not affecting the skin flora. Saskine™ 50N enhances the antimicrobial efficacy of typically used preservatives like phenoxyethanol, isothiazolinones or parabens and by doing so enables lower concentration

Catana™ EPOX 2360 is a clear viscous liquid consisting of polypropyleneglycol diglycidylether. It has a higher epoxy group content than the Catana™ EPOX 2361. Catana™ EPOX 2360 main use is as reactive diluent or flexibilizing resin for high viscosity epoxy resins applied in coatings, casting, adhesives, sealants, etc.

Catana™ EPOX 2015 is a distilled min. 98% grade of 2-ethylhexylglycidylether. Catana™ EPOX 2015 main use is as reactive diluent for high viscosity epoxy resins applied in high solids coatings, tooling, flooring, adhesives, etc.

Catana™ CAA 2340 is a solid consisting of dodecyltrimethylammonium bromide. Catana™ CAA 2340 can be used as catalyst for polymerization of e.g. Coatings and powder coatings.

Catana™ CAA 2494 is a crystal-clear solution of tetramethylammonium hydroxide in water. Catana™ CAA 2494 can be used as strong organic base catalyst and/or combined as phase transfer catalyst and pH-adjuster in many organic transitions used in the polymer industry.

Catana™ CAA 2455 is a clear 55% solution of tetrabutylammonium hydroxide in water. Catana™ CAA 2455 can be used as strong organic base catalyst or combined as phase transfer catalyst and pH-adjuster in many organic transitions used in the polymer industry.

Catana™ CAA 2440 is aqueous tetraethylammonium hydroxide colorless liquid. Catana™ CAA 2440 can be used as strong organic base catalyst or combined as phase transfer catalyst and pH-adjuster in many organic transitions used in the polymer industry.

Catana™ CAA 2855 is crystal-clear 50% solution of Tetramethylammonium Chloride in Water. Catana™ CAA 2855 can be used as a catalyst or as phase transfer catalyst in the preparation of polymers like epoxy resins, vinylester resins, etc.

Catana™ EPOX 2474 is a distilled min. 98% grade of normal-butylglycidylether. Catana™ EPOX 2474 is most efficient viscosity reducing reactive diluent for high viscosity epoxy resins such are applied in adhesives, laminating, tooling, etc.