Products

ARMIDAN® NT7510 is a Maleic Anhydride modified polyolefin elastomer specifically designed for toughening Nylon 6, Nylon 66, and other polyamides. Suggested loading levels are between 15 and 25 wt % depending on the specific Nylon grade and desired level of impact modification.

PEXIDAN® J/T is a low density flame-retardant XLPE system curable by moisture and consists of a silane pregrafted base compound A-3001 and a flame-retardant catalyst masterbatch CAT-012FR. Mixed and extruded in the proper proportions (60:40), the two components result in a material that is curable by exposure to 70-95°C hot water or even ambient moisture. PEXIDAN® J/T is designed to meet SAE J1128 standards for GXL, TXL and SXL type insulation. PEXIDAN® J/T is halogenated but is RoHS-compliant.

PEXIDAN® HF X/T is a unique low smoke halogen free flame retardant 90°C wet-rated XL-insulation system curable by moisture. It consists of a silane pre-grafted base compound SX651 and a catalyst masterbatch CM540U. Mixed and extruded in the proper proportions (95:5), the two components result in a material that is crosslinkable by exposure to 90°C hot water. PEXIDAN® HF X/T is REACH and RoHS-compliant and is UL 2885 certified to bear the Halogen Free “HF” designation. PEXIDAN® HF X/T is UL-bulletinized and wire made with this insulation system may be marked as Oil Resistant “PR I” and “PR II”, Gas & Oil Resistant “GR I” and “GR II”, “-40C” and “SUNRES” in all colors. This compound will meet a 105°C dry rating.

PEXIDAN® X/T-UV is a low density flame-retardant XLPE system curable by moisture and consists of a silane pre-grafted base compound A-3001 and a flame-retardant catalyst masterbatch CAT-005FR-UV1. Mixed and extruded in the proper proportions the two-component system results in a material that is curable by exposure to 70-95°C hot water or even ambient moisture. PEXIDAN® X/T-UV is halogenated but is RoHS-compliant. UL44 type insulation may be marked SUNRES or SR in all colors for sizes of 6 AWG and larger. UL4703 photovoltaic insulation may be marked SUNRES in all sizes and colors

PEXIDAN® SX505:CM493 and SX505:CM497 is a silane crosslinkable rubber compound, curable when exposed to moist conditions. The compound can be processed on largely standard thermoplastic extrusion equipment with good extrusion properties at high output rates. The graft component SX505 is mixed with a crosslinking catalyst masterbatch CM493 or CM497 generally in the ratio 95:5. CM497 is a lower strength catalyst masterbatch and is used on thin wall extrusion or to reduce premature crosslinking during processing. The SX505:CM493 or SX505:CM497 systems have passed type-tests for use up to and including 33 kV. PEXIDAN® SX505 is a zero-halogen material and is used as insulation in Low Smoke Zero-Halogen (LSZH) cable constructions

LINXIDAN® LX4433 is a Maleated HDPE Coupling Agent designed specifically to chemically bind natural fibers to HDPE in Wood-Plastic Composites. Coupling fibers to the HDPE matrix, in a 50% wood-filled system, reduces moisture uptake while increasing flexural modulus by 20% and overall flexural strength by 90%.

EXTINITY® 0101-108 is a halogenated, flame retardant compound specifically designed for use in plenum tube applications. This compound has good thermal stability and can be converted easily on standard processing equipment.

PEXIDAN® V/T-2 is a low density flame-retardant XLPE system curable by moisture and consists of a silane-grafted base compound A-3001 and a catalyst masterbatch CAT-045FR. Mixed and extruded in the proper proportions (50/50), the two components result in a material that is curable by exposure to hot water. PEXIDAN® V/T-2 is halogenated but is RoHS-compliant.

PEXIDAN® A-3021 is an ethylene-copolymer based XLPE curable by moisture and is intended for application requiring superior flexibility. When mixed in the proper proportions with a suitable catalyst masterbatch, the resulting mixture is curable by exposure to stream, 70-95°C hot water, or even ambient moisture. A-3021 is the silane-grafted base component of a 2-part system and must be used with a suitable catalyst masterbatch.

PEXIDAN® H/T is a low density flame-retardant XLPE system curable by moisture and consists of a silane pregrafted base compound A-3001 and a flame-retardant catalyst masterbatch CAT-012FR. Mixed and extruded in the proper proportions (67/33) this mixture results in a material curable by exposure to 70-95°C hot water or even ambient moisture. PEXIDAN® H/T is listed with CSA for AWM and CL1251, CL1252 & CL1503, and for UL AWM styles 3173 and 3321. See below for a more complete list of suitable AWM styles. PEXIDAN® H/T is halogenated but is RoHS-compliant.

PEXIDAN® V/T is a low density flame-retardant XLPE system curable by moisture and consists of a silanegrafted base compound A-3001 and a flame-retardant catalyst masterbatch CAT-010FR. Mixed and extruded in the proper proportions (50/50), the two components result in a material that is curable by exposure to hot water. PEXIDAN® V/T is halogenated but is RoHS-compliant.

EXTINITY® 0211-301 is a highly loaded antimony oxide concentrate in an EPDM carrier resin. The antimony oxide content in EXTINITY® 0211-301 is 80% by weight. All SACO AEI Polymers flame retardant concentrates are much more easily dispersed and therefore provide resultant materials with superior physical properties and flame resistance versus the use of additives in their naturally occurring state.

THERMODAN® CP 0110-108 NT is a natural, UV resistant, Lead-free, RoHS compliant, Thermoplastic CPE compound. It is designed for use in a wide variety of jacketing applications including wire and cable and tube bundles. This compound has superior fire performance; including slow flame propagation, and self-extinguishing characteristics. THERMODAN® CP 0110-108 NT should be extruded with a screw configuration designed to optimize process conditions and throughput. This extrusion compound meets, or exceeds, several industry jacketing specifications, including UL 1277 tray cable. THERMODAN® CP 0110-108 NT has been designed to be optionally cross-linked by e-beam irradiation in order to further toughen the material and provide for a thermoset CPE compound. Additional information regarding recommended e-beam dosing is available upon request.

LINXIDAN® LX4510 is a polyolefin plastomer with a silane copolymer functionality, designed to improve compatibility and mechanical properties of polymer compounds. Contrarily to conventionally maleated polyolefin coupling agents, LINXIDAN® LX4510 does not interfere with metal stearates used as lubricants in Wood Plastics Composites (WPC), providing increased tensile strength, impact strength and flexural modulus, and reduced moisture absorption.

LINXIDAN® LX4435 is a Maleated PP Coupling Agent designed specifically to chemically bind natural fibers to PP in Wood-Plastic Composites. Coupling fibers to the polypropylene matrix, in a 50% wood-filled system, reduces moisture uptake (up to 43% at the 2% addition level), improves flexural modulus (stiffness) by 14%, and increases overall flexural strength by 70%.

PEXIDAN® HF SX524 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM424 or CM424/1, in the ratio 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX524 has been developed specially for particularly optical fiber ADSS (all dielectric self-supporting) communication cables to be installed on overhead power distribution networks. The material is black in color and suitable for outdoor use with excellent tracking and UV resistance.

SACO AEI Polymers THERMODAN® HF 0103-212 NT is a flame retardant non-halogen thermoplastic wire and cable compound. It is designed for use in a variety of jacketing applications. This compound has superior fire performance including slow flame propagation, low smoke production and low smoke corrosivity. THERMODAN® HF 0103-212NT can be used as a jacket compound on cables recognized under UL 1277 tray cables and can pass flame retardant requirements set forth under UL 1685, IEEE 1202 and FT-4. THERMODAN® HF 0103-212 NT is recognized under UL 2885 as being halogen free. It is natural in color and UV resistant.

THERMODAN® HF TP837B has been developed specially to offer good processability, very fast extrusion process with very low die drool.

EXTINITY® 0101-107 is a halogenated, flame retardant compound specifically designed for use in plenum tube applications. This compound has good thermal and ultraviolet stability and can be converted easily on standard processing equipment.

PEXIDAN® SX409 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM401 in the ratio 95:5. The SX409:CM401 compound has been developed specifically for cables operating up to 36kV. This compound is typically used in conjunction with crosslinkable semi-conducting material for conductor and insulation shields. Crosslinking is obtained by exposure to moist or hot water immersion only.

THERMODAN® HF TP837NU has been developed specially to offer good processability, very fast extrusion process with very low die drool.

EXTINITY® 0201-127 is a highly effective flame-retardant concentrate, which will provide excellent flame resistance properties. EXTINITY® 0201-127 easily disperses into a wide range of polyolefins through typical melt blending and is stabilized to impart thermal stability to the finished composition. EXTINITY® 0201-127 is non-blooming and has been designed to alleviate color shift problems when a flame retardant is used in colored films. The product is RoHS compliant.

PEXIDAN® HF SX623 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U/1 in the ratio 95:5 or CM540U in the ratio 97:3. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX623 has been designed to meet the requirements of IEC 60092-360 SHF2, BS 7655-2.6 SW4 and EN 50264 sheathing applications.

THERMODAN® HF TP870 has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

THERMODAN® HF TP832 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

PEXIDAN® SX523 pre-grafted black base is mixed with crosslinking catalyst masterbatch CM493 or CM497 in the ratio 95:5. This system is carbon loaded, with high UV stabilization, and has been developed especially for usage on overhead power cables insulation according NFC 33-209, “Câble Torsadé”. Crosslinking is obtained by exposure to moist or hot water immersion only.

ARMIDAN® NT7100 is a Maleic Anhydride modified polyolefin elastomer specifically designed for toughening Nylon 66 and other polyamides. Suggested loading levels are between 15 and 25 wt % depending on the specific Nylon grade and desired level of impact modification.

EXTINITY® 0202-104 (formerly known as: EXTINITY® CF101-LM) is a flame retardant masterbatch in a semi-crystalline, co-polymer polypropylene carrier. It has been designed for extrusion, and Wire and Cable insulation applications. The product meets between V-2 and V-0 flammability rating when tested to UL 94 at various thicknesses.

THERMODAN® HF TP870NU has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.

THERMODAN® HF TP832NU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.

EXTINITY® 0203-303 is a highly loaded antimony oxide concentrate in an EVA carrier resin. The antimony oxide content in EXTINITY® 0203-303 is 85% by weight. All SACO AEI Polymers flame retardant concentrates are much more easily dispersed and therefore provide resultant materials with superior physical properties and flame resistance versus the use of additives in their naturally occurring state.

PEXIDAN® HF SX612S pre-grafted base is mixed with catalyst masterbatch CM602 or CM601, in an addition rate between 5% and 10%, depending on extrusion conditions. This system has ambient cure. PEXIDAN® HF SX612S has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1 and EN 50525-3-41.

PEXIDAN® U/T is a low density XLPE system curable by moisture and consists of a silane pre-grafted base compound A-3001 and a catalyst masterbatch CAT-008. When mixed and extruded in the proper proportions (95/5), the two components result in a material curable by exposure to 70-95°C hot water or even ambient moisture. In order to prevent pre-scorching the grafted compound and the catalyst masterbatch must be stored separately and mixed only when used. PEXIDAN® U/T is RoHS-compliant. PEXIDAN® U/T is also suitable for medium voltage XLPE jacket applications not requiring flame retardancy.

THERMODAN® HF TP521 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.

ARMIDAN® NT7210 is a Maleic Anhydride modified polyolefin elastomer specifically designed for toughening Nylon 6, Nylon 66, and other polyamides. Suggested loading levels are between 15 and 25 wt % depending on the specific Nylon grade and desired level of impact modification.

PEXIDAN® SX554 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM493, in the ratio 95:5, or CM497, in the ratio between 90:10 and 93:7.CM493 is a stronger catalyst suitable for wall thicknesses > 1.5mm and CM497 is a weaker catalyst suitable for small conductor sizes, such as 1 to 4 mm2. The system SX554:CM493 or SX554:CM497, has been approved for use at 1kV and has found uses up to 10kV, it is highly flexible and enables the production of soft rubber cables without the use of continuous vulcanization equipment. Crosslinking is obtained by exposure to moist or hot water immersion only.