Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
SACO AEI Polymers
All SACO AEI Polymers
Search products
Matching Product Categories
Plastics
Elastomers
Markets
Certifications & Compliance
Labeling Claims
Physical Form
All Filters
69 Products found on SACO AEI Polymers
Most Viewed
TDS
With TDS
PEXIDAN® L/T-UV
Polymer Name:
High Density Polyethylene (HDPE)
Processing Methods:
Extrusion
Melt Flow Index:
0.7 - 0.7 g/10 min
PEXIDAN® L/T-UV is a high density PEX system consisting of a silane grafted basecompound A-1001 and a catalyst masterbatch CAT-003 (or A-1022 and CAT-117). When mixed and extruded in the proper proportions, the two-component system results in a material that is crosslinkable by exposure to moisture or by immersion in hot water at 90-95°C. PEXIDAN® L/T is listed by NSF International to standards 14 and 61 and to Canadian Standards Association standard B137.5. NSFI certification to ASTM F876 and ASTM F2023 testifies to its superior resistance to oxidation by hot, chlorinated water. PEXIDAN® L/T is permitted to be used in domestic continuous re-circulation systems and is listed by NSF as a NSF-pw CL5 / PEX 5006 material.
PEXIDAN® J/T
Polymer Name:
Low Density Polyethylene (LDPE)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
PEXIDAN® J/T is a low density flame-retardant XLPE system curable by moisture and consists of a silane pregrafted base compound A-3001 and a flame-retardant catalyst masterbatch CAT-012FR. Mixed and extruded in the proper proportions (60:40), the two components result in a material that is curable by exposure to 70-95°C hot water or even ambient moisture. PEXIDAN® J/T is designed to meet SAE J1128 standards for GXL, TXL and SXL type insulation. PEXIDAN® J/T is halogenated but is RoHS-compliant.
PEXIDAN® HF X/T
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Building Wire Insulation, Low Voltage Insulation, Cables, Building Materials, Wires
Density:
1290.0 - 1290.0 kg/m³
PEXIDAN® HF X/T is a unique low smoke halogen free flame retardant 90°C wet-rated XL-insulation system curable by moisture. It consists of a silane pre-grafted base compound SX651 and a catalyst masterbatch CM540U. Mixed and extruded in the proper proportions (95:5), the two components result in a material that is crosslinkable by exposure to 90°C hot water. PEXIDAN® HF X/T is REACH and RoHS-compliant and is UL 2885 certified to bear the Halogen Free “HF” designation. PEXIDAN® HF X/T is UL-bulletinized and wire made with this insulation system may be marked as Oil Resistant “PR I” and “PR II”, Gas & Oil Resistant “GR I” and “GR II”, “-40C” and “SUNRES” in all colors. This compound will meet a 105°C dry rating.
EXTINITY® 0202-103
Polymer Name:
Polypropylene (unspecified)
Processing Methods:
Extrusion, Thermoforming, Injection Molding, Compounding
Additives Included:
Flame Retardant
Melt Flow Index:
4.0 - 4.0 g/10 min
EXTINITY® 0202-103 is a highly loaded masterbatch of brominated flame retardant pre-dispersed in a polypropylene carrier. It has been designed for use in variety of compounding applications. The pellet form makes the flame retardant easier to handle, more efficient, and can lower overall costs. The product is RoHS compliant.
EXTINITY® 0101-108
Polymer Name:
High Density Polyethylene (HDPE)
Processing Methods:
Injection Molding, Compression Molding, Film Extrusion, Extrusion
Additives Included:
Flame Retardant
Melt Flow Index:
0.6 - 0.6 g/10 min
EXTINITY® 0101-108 is a halogenated, flame retardant compound specifically designed for use in plenum tube applications. This compound has good thermal stability and can be converted easily on standard processing equipment.
THERMODAN® HF TP521BU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Carbon Black, Flame Retardant
End Uses:
Wires, Cables
Density:
1480.0 - 1480.0 kg/m³
THERMODAN® HF TP521BU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.
THERMODAN® HF TP521NU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
UV Stabilizer, Flame Retardant
End Uses:
Wires, Cables
Density:
1480.0 - 1480.0 kg/m³
THERMODAN® HF TP521NU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.
THERMODAN® HF TP832BUT
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Carbon Black, Flame Retardant, Antimicrobial
End Uses:
Cables, Wires
Density:
1500.0 - 1500.0 kg/m³
THERMODAN® HF TP832BUT has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.
THERMODAN® HF TP519CNU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Stabilizer (Unspecified), Flame Retardant
End Uses:
Cables, Wires, Low Voltage Insulation, Cable Jacketing, Jacketing
Density:
1500.0 - 1500.0 kg/m³
THERMODAN® HF TP519C has been developed specially to offer good processability, very fast extrusion process with very low die drool.
PEXIDAN® SX546
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Low Voltage Insulation, Cables, Wires
Density:
920.0 - 920.0 kg/m³
PEXIDAN® SX546 pre-grafted base is mixed with crosslinking catalyst masterbatch CM493CD, for small cross sections, or CM497CD, in the ratio 95:5, for a 125ºC working temperature system. This system has ambient cure.
THERMODAN® HF TP543CBU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
End Uses:
Low Voltage Insulation, Cables, Jacketing, Wires, Cable Jacketing
Density:
1540.0 - 1540.0 kg/m³
THERMODAN® HF TP 543CBU has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.
PEXIDAN® HF SX612ES
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1520.0 - 1520.0 kg/m³
Tensile Strength:
13.0 - 13.0 MPa
PEXIDAN® HF SX612ES pre-grafted base is mixed with catalyst masterbatch CM602 or CM601, in an addition rate between 5% and 10%, depending on extrusion conditions. This system has ambient cure. PEXIDAN® HF SX612ES has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1 and EN 50525-3-41, with enhanced fire resistance to comply with fire testing on smaller cross sections.
EXTINITY® 0101-205
Polymer Name:
Polyolefin (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
Melt Flow Index:
0.2 - 0.2 g/10 min
EXTINITY® 0101-205 is a natural, non-halogen flame retardant RoHS polyolefin compound. It is designed for use in a wide variety of jacketing and coating applications. This compound has superior fire performance; including slow flame propagation, self-extinguishing characteristics, and low smoke production. EXTINITY® 0101-205 should be extruded with a screw configuration designed to optimize process conditions and throughput.
THERMODAN® HF TP812NU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant, UV Stabilizer
End Uses:
Wires, Cables
Density:
1490.0 - 1490.0 kg/m³
THERMODAN® HF TP812NU has been developed specially to offer good processability, fast extrusion process with very low die drool. TP812 is capable of meeting the flame retardant requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions. It is also recognized as halogen free under UL 2885. It can be extruded using PVC extruders and screws. It possesses excellent tensile and flame retardant properties and meets the requirements of limited toxic and corrosive fume emission
THERMODAN® HF TP835
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
End Uses:
Wires, Cables
Density:
1480.0 - 1480.0 kg/m³
THERMODAN® HF TP835 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP835 have passed the 3m3 smoke density chamber test to IEC 61034-2.
THERMODAN® CP 0110-108 BK
Polymer Name:
Chlorinated Polyethylene (CPE)
Processing Methods:
Extrusion
Features:
Slow Flame Propagation, Self Extinguishing, UV Resistant
Density:
1410.0 - 1410.0 kg/m³
Strain at Break:
363.0 - 363.0 %
THERMODAN® CP 0110-110 BK is a black, UV resistant, lead free, RoHS compliant, thermoplastic CPE compound. It is designed for use in a wide variety of jacketing applications including wire and cable and tube bundles. This compound has superior fire performance including slow flame propagation and self-extinguishing characteristics. THERMODAN® CP 0110-110 BK should be extruded with a screw configuration designed to optimize process conditions and throughput. This extrusion compound meets or exceeds several industry jacketing specifications including UL 1277 tray cable.
PEXIDAN® SX409NT
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Medium Voltage Insulation, Cables, Wires
Density:
928.0 - 928.0 kg/m³
PEXIDAN® SX409NT pre-grafted base is mixed with a crosslinking catalyst masterbatch CM401 in the ratio 95:5. The SX409NT:CM401 system has been developed specifically for cables operating up to 36kV. The graft compound contains a non-staining stabilizer and an effective tree retarder, giving outstanding long term retention of dielectric strength. This compound is typically used in conjunction with crosslinkable semi-conducting material for conductor and insulation shields. Crosslinking is obtained by exposure to moist or hot water immersion only.
THERMODAN® HF TP519CB
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
End Uses:
Low Voltage Insulation, Cables, Jacketing, Wires, Cable Jacketing
Density:
1500.0 - 1500.0 kg/m³
THERMODAN® HF TP519CB has been developed specially to offer good processability, very fast extrusion process with very low die drool.
THERMODAN® HF TP519CBU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Carbon Black, Flame Retardant
End Uses:
Low Voltage Insulation, Cables, Jacketing, Wires, Cable Jacketing
Density:
1500.0 - 1500.0 kg/m³
THERMODAN® HF TP519CBU has been developed specially to offer good processability, very fast extrusion process with very low die drool.
PEXIDAN® SX522A
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Low Voltage Insulation, Cables, Wires
Density:
920.0 - 920.0 kg/m³
PEXIDAN® SX522A pre-grafted base is mixed with crosslinking catalyst masterbatch CM401 in the ratio 95:5. This system has ambient cure.
THERMODAN® HF TP870NU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant, UV Stabilizer
End Uses:
Wires, Cables
Density:
1460.0 - 1460.0 kg/m³
THERMODAN® HF TP870NU has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.
THERMODAN® HF TP543CBT
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
End Uses:
Low Voltage Insulation, Cables, Jacketing, Wires, Cable Jacketing
Density:
1540.0 - 1540.0 kg/m³
THERMODAN® HF TP 543CBT has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.
THERMODAN® HF TP812BU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant, Carbon Black
End Uses:
Wires, Cables
Density:
1490.0 - 1490.0 kg/m³
THERMODAN® HF TP812BU has been developed specially to offer good processability, fast extrusion process with very low die drool. TP812 is capable of meeting the flame retardant requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions. It is also recognized as halogen free under UL 2885. It can be extruded using PVC extruders and screws. It possesses excellent tensile and flame retardant properties and meets the requirements of limited toxic and corrosive fume emission
PEXIDAN® HF SX738
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Building Wire Insulation, Cables, Appliance Wire Insulation, Wires
Density:
1400.0 - 1400.0 kg/m³
PEXIDAN® HF SX738 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM401 in the ratio 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. This system is designed specifically for the production, by extrusion, of flame retardant halogen free heat shrinkable tubing. The two component system SX738:CM401 combines ease of processing with the ability to achieve a degree of crosslinking compatible with good expansion and contraction.
EXTINITY® C0007-18LM
Polymer Name:
Polypropylene Copolymer
Processing Methods:
Extrusion
Melt Flow Index:
1.5 - 1.5 g/10 min
EXTINITY® C0007-18LM is an extrusion grade UL V-0 recognized copolymer polypropylene based compound.The product features an excellent balance of properties including high impact strength, high elongation and good flexural and tensile properties. EXTINITY® C0007-18LM has an all color UL V-0 rating. Custom colors can be provided. Typical applications including extruded sheet, rod and profiles.
EXTINITY® 0201-127
Polymer Name:
Polyolefin (unspecified)
Processing Methods:
Extrusion, Thermoforming, Injection Molding
Additives Included:
Flame Retardant
Melt Flow Index:
1.0 - 5.0 g/10 min
EXTINITY® 0201-127 is a highly effective flame-retardant concentrate, which will provide excellent flame resistance properties. EXTINITY® 0201-127 easily disperses into a wide range of polyolefins through typical melt blending and is stabilized to impart thermal stability to the finished composition. EXTINITY® 0201-127 is non-blooming and has been designed to alleviate color shift problems when a flame retardant is used in colored films. The product is RoHS compliant.
PEXIDAN® SX409
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Medium Voltage Insulation, Cables, Wires
Density:
928.0 - 928.0 kg/m³
PEXIDAN® SX409 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM401 in the ratio 95:5. The SX409:CM401 compound has been developed specifically for cables operating up to 36kV. This compound is typically used in conjunction with crosslinkable semi-conducting material for conductor and insulation shields. Crosslinking is obtained by exposure to moist or hot water immersion only.
PEXIDAN® HF SX524
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1400.0 - 1400.0 kg/m³
Tensile Strength:
10.0 - 10.0 MPa
PEXIDAN® HF SX524 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM424 or CM424/1, in the ratio 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX524 has been developed specially for particularly optical fiber ADSS (all dielectric self-supporting) communication cables to be installed on overhead power distribution networks. The material is black in color and suitable for outdoor use with excellent tracking and UV resistance.
EXTINITY® 0202-104
Functions:
Flame Retardant
Chemical Family:
Antimony & Antimony Compounds
Processing Methods:
Extrusion
Flame Rating:
UL 94 V2, UL 94 V0
EXTINITY® 0202-104 (formerly known as: EXTINITY® CF101-LM) is a flame retardant masterbatch in a semi-crystalline, co-polymer polypropylene carrier. It has been designed for extrusion, and Wire and Cable insulation applications. The product meets between V-2 and V-0 flammability rating when tested to UL 94 at various thicknesses.
PEXIDAN® SX523
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Low Voltage Insulation, Cables, Wires
Density:
950.0 - 950.0 kg/m³
PEXIDAN® SX523 pre-grafted black base is mixed with crosslinking catalyst masterbatch CM493 or CM497 in the ratio 95:5. This system is carbon loaded, with high UV stabilization, and has been developed especially for usage on overhead power cables insulation according NFC 33-209, “Câble Torsadé”. Crosslinking is obtained by exposure to moist or hot water immersion only.
THERMODAN® HF TP870
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
End Uses:
Wires, Cables
Density:
1460.0 - 1460.0 kg/m³
THERMODAN® HF TP870 has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.
PEXIDAN® HF SX612S
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1470.0 - 1470.0 kg/m³
Tensile Strength:
14.0 - 14.0 MPa
PEXIDAN® HF SX612S pre-grafted base is mixed with catalyst masterbatch CM602 or CM601, in an addition rate between 5% and 10%, depending on extrusion conditions. This system has ambient cure. PEXIDAN® HF SX612S has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1 and EN 50525-3-41.
THERMODAN® HF TP837B
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
End Uses:
Wires, Cables
Density:
1520.0 - 1520.0 kg/m³
THERMODAN® HF TP837B has been developed specially to offer good processability, very fast extrusion process with very low die drool.
PEXIDAN® SX554
Polymer Name:
Ethylene Propylene Diene Terpolymer (EPDM)
Processing Methods:
Extrusion
Density:
900.0 - 900.0 kg/m³
PEXIDAN® SX554 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM493, in the ratio 95:5, or CM497, in the ratio between 90:10 and 93:7.CM493 is a stronger catalyst suitable for wall thicknesses > 1.5mm and CM497 is a weaker catalyst suitable for small conductor sizes, such as 1 to 4 mm2. The system SX554:CM493 or SX554:CM497, has been approved for use at 1kV and has found uses up to 10kV, it is highly flexible and enables the production of soft rubber cables without the use of continuous vulcanization equipment. Crosslinking is obtained by exposure to moist or hot water immersion only.
EXTINITY® 0203-303
Chemical Name:
Antimony Trioxide
Chemical Family:
Antimony & Antimony Compounds
Functions:
Flame Retardant
Processing Methods:
Extrusion
Synonyms:
Antimony Sesquioxide, Antimony(III) oxide
EXTINITY® 0203-303 is a highly loaded antimony oxide concentrate in an EVA carrier resin. The antimony oxide content in EXTINITY® 0203-303 is 85% by weight. All SACO AEI Polymers flame retardant concentrates are much more easily dispersed and therefore provide resultant materials with superior physical properties and flame resistance versus the use of additives in their naturally occurring state.
THERMODAN® HF TP521
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
End Uses:
Wires, Cables
Density:
1480.0 - 1480.0 kg/m³
THERMODAN® HF TP521 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.
Show
36
of 69 results
1
2