Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Sustainability
Products
Cosmetic Ingredients
Food Ingredients
Knowde for Suppliers
Browse
Sample
Chat
Request
Search
Products
SACO AEI Polymers
All SACO AEI Polymers
Search products
Matching Product Categories
Plastics
Elastomers
Markets
Certifications & Compliance
Labeling Claims
Physical Form
All Filters
55 Products found on SACO AEI Polymers
Most Viewed
TDS
With TDS
PEXIDAN® L/T-UV
Polymer Name:
High Density Polyethylene (HDPE)
Processing Methods:
Extrusion
Melt Flow Index:
0.7 - 0.7 g/10 min
PEXIDAN® L/T-UV is a high density PEX system consisting of a silane grafted basecompound A-1001 and a catalyst masterbatch CAT-003 (or A-1022 and CAT-117). When mixed and extruded in the proper proportions, the two-component system results in a material that is crosslinkable by exposure to moisture or by immersion in hot water at 90-95°C. PEXIDAN® L/T is listed by NSF International to standards 14 and 61 and to Canadian Standards Association standard B137.5. NSFI certification to ASTM F876 and ASTM F2023 testifies to its superior resistance to oxidation by hot, chlorinated water. PEXIDAN® L/T is permitted to be used in domestic continuous re-circulation systems and is listed by NSF as a NSF-pw CL5 / PEX 5006 material.
PEXIDAN® HF X/T
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Building Wire Insulation, Low Voltage Insulation, Cables, Building Materials, Wires
Density:
1290.0 - 1290.0 kg/m³
PEXIDAN® HF X/T is a unique low smoke halogen free flame retardant 90°C wet-rated XL-insulation system curable by moisture. It consists of a silane pre-grafted base compound SX651 and a catalyst masterbatch CM540U. Mixed and extruded in the proper proportions (95:5), the two components result in a material that is crosslinkable by exposure to 90°C hot water. PEXIDAN® HF X/T is REACH and RoHS-compliant and is UL 2885 certified to bear the Halogen Free “HF” designation. PEXIDAN® HF X/T is UL-bulletinized and wire made with this insulation system may be marked as Oil Resistant “PR I” and “PR II”, Gas & Oil Resistant “GR I” and “GR II”, “-40C” and “SUNRES” in all colors. This compound will meet a 105°C dry rating.
PEXIDAN® SX505
Polymer Name:
Ethylene Propylene Copolymer
Density:
900.0 - 900.0 kg/m³
PEXIDAN® SX505:CM493 and SX505:CM497 is a silane crosslinkable rubber compound, curable when exposed to moist conditions. The compound can be processed on largely standard thermoplastic extrusion equipment with good extrusion properties at high output rates. The graft component SX505 is mixed with a crosslinking catalyst masterbatch CM493 or CM497 generally in the ratio 95:5. CM497 is a lower strength catalyst masterbatch and is used on thin wall extrusion or to reduce premature crosslinking during processing. The SX505:CM493 or SX505:CM497 systems have passed type-tests for use up to and including 33 kV. PEXIDAN® SX505 is a zero-halogen material and is used as insulation in Low Smoke Zero-Halogen (LSZH) cable constructions
THERMODAN® HF TP837
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
End Uses:
Wires, Cables
Density:
1520.0 - 1520.0 kg/m³
THERMODAN® HF TP837 has been developed specially to offer good processability, very fast extrusion process with very low die drool.
THERMODAN® HF TP832BU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Carbon Black, Flame Retardant
End Uses:
Wires, Cables
Density:
1500.0 - 1500.0 kg/m³
THERMODAN® HF TP832BU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.
THERMODAN® HF TP812NU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant, UV Stabilizer
End Uses:
Wires, Cables
Density:
1490.0 - 1490.0 kg/m³
THERMODAN® HF TP812NU has been developed specially to offer good processability, fast extrusion process with very low die drool. TP812 is capable of meeting the flame retardant requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions. It is also recognized as halogen free under UL 2885. It can be extruded using PVC extruders and screws. It possesses excellent tensile and flame retardant properties and meets the requirements of limited toxic and corrosive fume emission
EXTINITY® 0101-205
Polymer Name:
Polyolefin (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
Melt Flow Index:
0.2 - 0.2 g/10 min
EXTINITY® 0101-205 is a natural, non-halogen flame retardant RoHS polyolefin compound. It is designed for use in a wide variety of jacketing and coating applications. This compound has superior fire performance; including slow flame propagation, self-extinguishing characteristics, and low smoke production. EXTINITY® 0101-205 should be extruded with a screw configuration designed to optimize process conditions and throughput.
THERMODAN® HF TP832BUT
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Carbon Black, Flame Retardant, Antimicrobial
End Uses:
Cables, Wires
Density:
1500.0 - 1500.0 kg/m³
THERMODAN® HF TP832BUT has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.
THERMODAN® HF TP519CNU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Stabilizer (Unspecified), Flame Retardant
End Uses:
Cables, Wires, Low Voltage Insulation, Cable Jacketing, Jacketing
Density:
1500.0 - 1500.0 kg/m³
THERMODAN® HF TP519C has been developed specially to offer good processability, very fast extrusion process with very low die drool.
THERMODAN® HF TP543CBU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
End Uses:
Low Voltage Insulation, Cables, Jacketing, Wires, Cable Jacketing
Density:
1540.0 - 1540.0 kg/m³
THERMODAN® HF TP 543CBU has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.
THERMODAN® HF TP521NU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
UV Stabilizer, Flame Retardant
End Uses:
Wires, Cables
Density:
1480.0 - 1480.0 kg/m³
THERMODAN® HF TP521NU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.
THERMODAN® HF TP519CB
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
End Uses:
Low Voltage Insulation, Cables, Jacketing, Wires, Cable Jacketing
Density:
1500.0 - 1500.0 kg/m³
THERMODAN® HF TP519CB has been developed specially to offer good processability, very fast extrusion process with very low die drool.
LINXIDAN® LX4436
Polymer Name:
Polyolefin (unspecified), Very Low Density Polyethylene (VLDPE)
Processing Methods:
Compounding
Melt Flow Index:
0.3 - 0.3 g/10 min
LINXIDAN® LX4436 is a maleated polyolefin Coupling Agent designed for alloying dissimilar materials to improve physical properties. Suggested loading levels are between 1 and 4 wt% depending on the specific materials being compounded, particular physical property of interest and level of improvement desired in the identified property.
PEXIDAN® HF SX612ES
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1520.0 - 1520.0 kg/m³
Tensile Strength:
13.0 - 13.0 MPa
PEXIDAN® HF SX612ES pre-grafted base is mixed with catalyst masterbatch CM602 or CM601, in an addition rate between 5% and 10%, depending on extrusion conditions. This system has ambient cure. PEXIDAN® HF SX612ES has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1 and EN 50525-3-41, with enhanced fire resistance to comply with fire testing on smaller cross sections.
THERMODAN® HF TP519CBU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Carbon Black, Flame Retardant
End Uses:
Low Voltage Insulation, Cables, Jacketing, Wires, Cable Jacketing
Density:
1500.0 - 1500.0 kg/m³
THERMODAN® HF TP519CBU has been developed specially to offer good processability, very fast extrusion process with very low die drool.
THERMODAN® HF TP835
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
End Uses:
Wires, Cables
Density:
1480.0 - 1480.0 kg/m³
THERMODAN® HF TP835 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP835 have passed the 3m3 smoke density chamber test to IEC 61034-2.
THERMODAN® HF TP812BU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant, Carbon Black
End Uses:
Wires, Cables
Density:
1490.0 - 1490.0 kg/m³
THERMODAN® HF TP812BU has been developed specially to offer good processability, fast extrusion process with very low die drool. TP812 is capable of meeting the flame retardant requirements of UL 1666, UL 1685, IEEE 1202, FT-4 in specific fiber optic constructions. It is also recognized as halogen free under UL 2885. It can be extruded using PVC extruders and screws. It possesses excellent tensile and flame retardant properties and meets the requirements of limited toxic and corrosive fume emission
THERMODAN® HF TP343NT
Polymer Name:
Thermoplastic (unspecified)
End Uses:
Wires, Lszh Jacketing, Cable Jacketing, Cables, Jacketing
Density:
1640.0 - 1640.0 kg/m³
THERMODAN® HF TP343NT is a Patent Pending High Performance, Low Smoke Halogen-Free, Thermoplastic Wire and Cable Compound. This compound has superior fire performance, low smoke production and contains no halogens. When used as a jacket for Fiber Optic Cables, TP343NT can assist the cable maker in meeting the stringent new European CPR Regulations at the B2ca Classification (Cable Design Dependant | Actual Results May Vary). THERMODAN® HF TP343NT is natural in color, UV resistant, and is certified Halogen Free by UL to UL2885
THERMODAN® HF TP543CBT
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
End Uses:
Low Voltage Insulation, Cables, Jacketing, Wires, Cable Jacketing
Density:
1540.0 - 1540.0 kg/m³
THERMODAN® HF TP 543CBT has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.
THERMODAN® HF 0103-212 BK
Polymer Name:
Thermoplastic (unspecified)
Additives Included:
Flame Retardant
End Uses:
Cable Jacketing, Jacketing, Lszh Jacketing, Electronic Cable Jacketing, Wire Jacketing
Density:
1510.0 - 1510.0 kg/m³
THERMODAN® HF 0103-212 BK is a black, non-halogen thermoplastic wire and cable compound. It is designed for use in a wide variety of jacketing applications. This compound has superior fire performance; including slow flame propagation, self-extinguishing characteristics, and low smoke production. It is suitable for use as a jacket compound for cables recognized under UL 1277 tray cables and can pass flame retardant requirements set forth under UL 1685, IEEE 1202 and FT-4. THERMODAN® HF 0103-212 BK is recognized under UL 2885 as being halogen free. It is UV resistant and RoHS compliant.
THERMODAN® HF TP870NU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant, UV Stabilizer
End Uses:
Wires, Cables
Density:
1460.0 - 1460.0 kg/m³
THERMODAN® HF TP870NU has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.
PEXIDAN® HF SX623
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1430.0 - 1430.0 kg/m³
Tensile Strength:
10.3 - 10.3 MPa
PEXIDAN® HF SX623 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM540U/1 in the ratio 95:5 or CM540U in the ratio 97:3. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX623 has been designed to meet the requirements of IEC 60092-360 SHF2, BS 7655-2.6 SW4 and EN 50264 sheathing applications.
THERMODAN® HF TP837NU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant, UV Stabilizer
End Uses:
Wires, Cables
Density:
1520.0 - 1520.0 kg/m³
THERMODAN® HF TP837NU has been developed specially to offer good processability, very fast extrusion process with very low die drool.
THERMODAN® HF TP832
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
End Uses:
Wires, Low Voltage Insulation, Cables
Density:
1500.0 - 1500.0 kg/m³
THERMODAN® HF TP832 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.
THERMODAN® HF TP870
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
End Uses:
Wires, Cables
Density:
1460.0 - 1460.0 kg/m³
THERMODAN® HF TP870 has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.
THERMODAN® HF TP521
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
End Uses:
Wires, Cables
Density:
1480.0 - 1480.0 kg/m³
THERMODAN® HF TP521 has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables made with TP521 have passed the 3m3 smoke density chamber test to IEC 61034-2.
PEXIDAN® HF SX524
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1400.0 - 1400.0 kg/m³
Tensile Strength:
10.0 - 10.0 MPa
PEXIDAN® HF SX524 pre-grafted base is mixed with a crosslinking catalyst masterbatch CM424 or CM424/1, in the ratio 95:5. Crosslinking is obtained by exposure to moist or hot water immersion only. PEXIDAN® HF SX524 has been developed specially for particularly optical fiber ADSS (all dielectric self-supporting) communication cables to be installed on overhead power distribution networks. The material is black in color and suitable for outdoor use with excellent tracking and UV resistance.
PEXIDAN® HF SX612S
Polymer Name:
Crosslinked Polyethylene (XLPE / PEX)
Processing Methods:
Extrusion
End Uses:
Cables, Wires
Density:
1470.0 - 1470.0 kg/m³
Tensile Strength:
14.0 - 14.0 MPa
PEXIDAN® HF SX612S pre-grafted base is mixed with catalyst masterbatch CM602 or CM601, in an addition rate between 5% and 10%, depending on extrusion conditions. This system has ambient cure. PEXIDAN® HF SX612S has been designed to meet the requirements of IEC 60092-351 HF90, EN 50363-5, EI5 type, EN 50525-1 and EN 50525-3-41.
THERMODAN® HF TP837B
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
End Uses:
Wires, Cables
Density:
1520.0 - 1520.0 kg/m³
THERMODAN® HF TP837B has been developed specially to offer good processability, very fast extrusion process with very low die drool.
ARMIDAN® NT7210
Polymer Name:
Polyolefin Elastomer
Features:
Excellent Impact Modifier, Low Smoke Emission
Density:
890.0 - 890.0 kg/m³
ARMIDAN® NT7210 is a Maleic Anhydride modified polyolefin elastomer specifically designed for toughening Nylon 6, Nylon 66, and other polyamides. Suggested loading levels are between 15 and 25 wt % depending on the specific Nylon grade and desired level of impact modification.
THERMODAN® HF TP543C
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant
End Uses:
Low Voltage Insulation, Cables, Jacketing, Wires, Cable Jacketing
Density:
1540.0 - 1540.0 kg/m³
THERMODAN® HF TP 543C has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.
THERMODAN® HF TP837BU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant, UV Stabilizer
End Uses:
Wires, Cables
Density:
1520.0 - 1520.0 kg/m³
THERMODAN® HF TP837BU has been developed specially to offer good processability, very fast extrusion process with very low die drool.
THERMODAN® HF TP870BU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Flame Retardant, UV Stabilizer
End Uses:
Wires, Cables
Density:
1460.0 - 1460.0 kg/m³
THERMODAN® HF TP870BU has been developed specially to meet general requirements of BS 7655 Section 6.1 type LTS 1.
THERMODAN® HF TP543C2
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
UV Stabilizer, Flame Retardant
End Uses:
Low Voltage Insulation, Cables, Wires
Density:
1540.0 - 1540.0 kg/m³
THERMODAN® HF TP543C2 has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C2 have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.
THERMODAN® HF TP543CBU2
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
Carbon Black, Flame Retardant
End Uses:
Cables, Jacketing, Wires, Cable Jacketing
Density:
1540.0 - 1540.0 kg/m³
THERMODAN® TP543CBU2 has been developed specially to comply with the requirements of BS7655- 6.1 for types LTS1, 3 and 4; EN 50290-2-27 and HD 604 for type HM2 and HD 604 for type HM4. Cables made with TP543C2 have complied with IEC 60332, part 22, 23 & 24 – 1 and 3 fire tests.
THERMODAN® HF TP832NU
Polymer Name:
Thermoplastic (unspecified)
Processing Methods:
Extrusion
Additives Included:
UV Stabilizer, Flame Retardant
End Uses:
Wires, Cables
Density:
1500.0 - 1500.0 kg/m³
THERMODAN® HF TP832NU has been developed specially to comply with the requirements of BS7655 Section 6 for types LTS1, 2, 3 and 4; EN 50290-2-27 for type HM2 and HD 604 for type HM4. Cables sheathed with TP832 have received LPCB approval.
Show
36
of 55 results
1
2