Products

PELECTRON LMP-FS is an excellent dispersibility into PE and heat-sealing property. Low resistivity which is achieved surface resistivity range to 10^8-9 ohm/sq. Low dosage minimally affects the mechanical properties and moldability

PELECTRON PVL is a polymer-alloy type permanent antistatic agent for polyolefin resins (e. g. polyethylene, and polypropylene) which was developed by using an original Sanyo Chemical compatibilization technique. This product imparts a long-lasting antistatic property to polyolefin resins while causing practically no lowering of their physical properties and moldability. This product dry-blended with polyolefin can be directly molded without a kneading process because this product exhibits excellent dispersibility in polyolefin. In addition, compared to conventional permanent antistatic agents, PELECTRON PVL exhibits an excellent antistatic property even when used in small amounts because this product substantially decreases surface resistivity of polyolefin.

SANHIBITOR No.50 is a water-soluble rust inhibitor. It produces less foam and is easily rinsed. It has excellent rust preventive properties and is resistant to heat and alkaline solutions. It is substitutable for alkanol amine. The recommended concentration: 0.2–0.5 wt %.

ECONOL TM-22 is a hair conditioner base containing approx. 45 wt % alkyltrimethyl-ammonium chloride as an active ingredient, and approx. 55 wt % alcohol, composed from cetyl alcohol and stearyl alcohol (50/50 mixture), as a solvent. ECONOL TM-22 can be used as a hair conditioner base, because it imparts excellent detangling and moisture retention abilities and softness to hair. This product is easily applicable as a base material of hair conditioners and hair treatments, because it contains no low-boiling-point solvents including isopropanol.

NEWPOL 50HB-400 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

SANMODUR TW-E is tooling material (chemical board) for models & molds in various processes. It has lower rates of moisture expansion this is less than one-quarter that of a conventional product. Improving deflection temperature to 95°C maintaining other performance of conventional product.

UPRENE UXA-307 is a polyurethane emulsion used for adhesion. Especially, this product is suitable for production of decorated plywood because it excels in adhesion with polyvinylchloride sheet and plywood/canvas, and has excellent creep resistance. And this product is able to be used as an adhesion (creep resistance) improver by blending it to resin emulsion type adhesion such as anion/nonionic type EVA, acryl, SBR and vinyl acetate.

IONET T products are ethylene oxide adducts of IONET S products and are more hydrophilic. They are used as emulsifiers together with lipophilic surfactants such as IONETS products, to produce creamy cosmetics and creamy ointments. IONET T-80V is used for fluidic cosmetics. IONET T-80V is solubilizing agents for perfumes, refined oils and fats of various kinds.

CATION LQ imparts long-lasting smoothness and softness to hair. It performs as a conditioning agent when used in shampoos.CATION LQ is a lanolin-based cationic surfactant containing approx. 65 wt % of N(N'-lanolin fatty acid amide propyl)-N-ethyl-N,N-dimethylammonium ethylsulfate as the active ingredient, and 1,3-butylene glycol and water as solvents. This product has the features of both lanolin and cationic surfactants (e.g., a moisturizing effect, an antistatic property and a tactile property), making it optimal for use as a base in hair conditioners and treatments. It is also suitable for use as the conditioner ingredient in shampoos with built-in conditioners due to its compatibility with anionic surfactants.

ACLUBE V-4000 is viscosity index improvers, suitable for ATF, gear oils and hydraulic fluids. They exhibit high thickening and low-temperature viscosity properties.

NEWPOL PE-68 is nonionic surfactants. They have low toxicity and exhibit low irritancy. They produce less foam.

POLYTHICK SC-75 is a curing agent in a two-component type pressure-sensitive adhesive suitable for use in the production of paper, synthetic paper, polyester film self-adhesive labels and double-sided adhesive tapes. This product is applicable particularly to paper and synthetic paper labels used for frozen foods, due to its high adhesive strength and excellent tackiness even on wet surfaces and at low temperatures.