Products

NEWPOL 50HB-400 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

SANMODUR TW-E is tooling material (chemical board) for models & molds in various processes. It has lower rates of moisture expansion this is less than one-quarter that of a conventional product. Improving deflection temperature to 95°C maintaining other performance of conventional product.

ACLUBE V-4000 is viscosity index improvers, suitable for ATF, gear oils and hydraulic fluids. They exhibit high thickening and low-temperature viscosity properties.

ACLUBE V-3030 is viscosity index improver for lubricating oils which are mainly composed of a methacrylate copolymer and a refined mineral oil. Lubricating oils (engine oil, ATFs, CVTFs, gear oils, hydraulic fluids, etc.) having excellent viscosity characteristics can be prepared by blending ACLUBE V-3030 with mineral oils.

NEWPOL 50HB-100 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

NEWPOL LB-1715 is suitable for application to rubbers, plastics such as high speed tire molding, foam rubber, etc. They are used in organic solvent solution.

IONET S products are nonionic and lipophilic surfactants. They have low toxicity and exhibit low irritancy. They are used as emulsifiers together with hydrophilic surfactants such as IONET T products and EMULMIN products, to produce creamy cosmetics and creamy ointments. IONET S-85 is used for fluidic cosmetics.

UMEX products are a series of acid modified low-molecular-weight polyolefin containing a carboxylic anhydride group as the functional group. These products have a higher degree of modification and lower melt viscosity compared with conventional acid modified polyolefin. Therefore, the reactivity of the products is extremely adaptable to various synthetic resins and inorganic materials.

NEWPOL LB-300X is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers. It can be used when extremely high heat resistance is required.

NEWPOL 75H-90000 is polyalkylene glycol-type lubricant used for lithium soap grease as well as high temperature grease compounded with graphite or molybdenum sulfide. It is soluble in water.

IONET S products are nonionic and lipophilic surfactants. They have low toxicity and exhibit low irritancy. They are used as emulsifiers together with hydrophilic surfactants such as IONET T products and EMULMIN products, to produce creamy cosmetics and creamy ointments.

SANMODUR MH-15E is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface, excellent machinability and antistatic property painting processes can be simplified and applicable to design models, styling models etc.

IONET T products are ethylene oxide adducts of IONET S products and are more hydrophilic. They are used as emulsifiers together with lipophilic surfactants such as IONET S products, to produce creamy cosmetics and creamy ointments. IONET T-20C is used for fluidic cosmetics.

NEWPOL LB-65 is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers.

SANMODUR MH-5E is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface, excellent machinability and antistatic property painting processes can be simplified and applicable to design models, styling models etc.

SANMODUR MAX-M is tooling material (chemical board) for models & molds in various processes. It has lower rates of moisture expansion this is less than one-quarter that of a conventional product. Improving deflection temperature to 88°C maintaining other performance of conventional product.

SANHIBITOR 150 is an oil-soluble rust inhibitor. It imparts excellent rust preventive properties to lubricants such as turbine oils, and fuel oils when used in small amounts.

IONET S products are nonionic and lipophilic surfactants. They have low toxicity and exhibit low irritancy. They are used as emulsifiers together with hydrophilic surfactants such as IONET T products and EMULMIN products, to produce creamy cosmetics and creamy ointments. IONET S-60V is used for nonfluidic cosmetics.

ACLUBE V-2041 is a viscosity index improver, suitable for ATF, CVTF, gear oils and hydraulic fluids. It exhibits high shear stability and low-temperature viscosity properties.

SANMODUR LC-15M is tooling material (chemical board) for models & molds in various processes. It is light weight and has excellent machinability. It has excellent dimensional stability, heat resistance and strength.

ACLUBE P-2090 is a pour point depressant, suitable for medium-high viscosity base oils. It exhibits high shear stability.

NEWPOL 50HB-660 is polyoxyalkylene glycol-type lubricants which are useful to apply as hydraulic fluids (water and glycol-type), high-temperature lubricants, low-temperature lubricating oil, compressor oil, vacuum pump oil, gear oil, hydraulic fluids, brake fluids for cars, grease, engine detergent, water-soluble cutting fluids, drawing oil, quenching oil, heating medium, mold-releasing agents for resins and rubber, lubricants for textile industries, defoaming agents, etc.

ACLUBE P-D3000 is a pour point depressant, suitable for medium-high viscosity base oils. It exhibits high dispersibility.

SANMODUR MH-20E is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface, excellent machinability and antistatic property painting processes can be simplified and applicable to design models, styling models etc.

SANMODUR LC-5M is tooling material (chemical board) for models & molds in various processes. It is light weight and has excellent machinability. It has excellent dimensional stability, heat resistance and strength.

SANMODUR LC-10M is tooling material (chemical board) for models & molds in various processes. It is light weight and has excellent machinability. It has excellent dimensional stability, heat resistance and strength.

ACLUBE P-2100 is a pour point depressant, suitable for medium-high viscosity base oils. It exhibits high shear stability.

ACLUBE P-4080 is Pour Point Depressant for lubricating oils which are mainly composed of a methacrylate copolymer and a refined mineral oil. Lubricating oils (engine oil, ATFs, CVTFs, gear oils, hydraulic fluids, etc.) having excellent viscosity characteristics can be prepared by blending ACLUBE P-4080 with mineral oils.

ACLUBE P-2320 is Pour Point Depressant for lubricating oils which are mainly composed of a methacrylate copolymer and a refined mineral oil. Lubricating oils (engine oil, ATFs, CVTFs, gear oils, hydraulic fluids, etc.) having excellent viscosity characteristics can be prepared by blending ACLUBE P-2320 with mineral oils.

NEWPOL LB-385 is polyalkylene glycol-type lubricants used for various purposes including compressor oils, gear oils and grease. They leave no residue after combustion. They cause practically no swelling and no shrinkage of natural or synthetic rubbers.

ACLUBE V-1050 is viscosity index improver for lubricating oils which are mainly composed of a methacrylate copolymer and a refined mineral oil. Lubricating oils (engine oil, ATFs, CVTFs, gear oils, hydraulic fluids, etc.) having excellent viscosity characteristics can be prepared by blending ACLUBE V-1050 with mineral oils.

ACLUBE V-2000 is a viscosity index improver, suitable for gear oils, ATF, CVTF and hydraulic fluids. It exhibits high shear stability and low-temperature viscosity properties for base oils.

UMEX 5200 is a specially-developed acid modified low-molecular-weight polypropylene. This product has a higher degree of modification and lower melt viscosity compared with conventional acid modified polypropylene. Therefore, polyolefin blended with the products excels in dispersibility of both pigments and fillers in resins, readily adheres to other materials. Moreover, this product works exceedingly well for improving molding processability of various resins.

SANMODUR MH-3E is tooling material (chemical board) for models & molds in various processes. It has light weight, smooth surface, excellent machinability and antistatic property painting processes can be simplified and applicable to design models, styling models etc.

SANMODUR MDX-M is tooling material (chemical board) for models & molds in various processes. It has fine surface and homogeneous cell structures good processability good dimensional stability and high heat resistance

ACLUBE V-5000 is a viscosity index improver, suitable for engine oils and hydraulic fluids. It exhibits high thickening and low-temperature viscosity properties.