Products

PARAFOL 12 RSPO-MB is a high pure paraffin produced from oleochemical resourced under RSPO-MB requirements. It is a clear, colorless liquid. PARAFOL 12 RSPO-MB is a very light and highly spreading emollient and a readily biodegradable alternative to D5 silicone oils.

ISOFOL 20 is a primary, saturated alcohol with defined branching of the carbon chain. Such alcohols are chemically described as 2-alkyl-1-alkanols and are also referred to as Guerbet alcohols. It is a high purity alcohol that offers excellent oxidative and color stability. Additionally, the twin, 100% linear alkyl branches of the ISOFOL alcohol give it a lower viscosity and better biodegradability than dimer alcohols derived from oxo-alcohols. The unique chemical structure of ISOFOL alcohol also provides good solubility and solvency.

PARAFOL single cut paraffin are an excellent choice when looking for a phase change material for latent heat storage applications including functional textiles and construction. PARAFOL single cut paraffin are an alternative choice when looking for non-polar solvents, oils or wax additives based on renewable resources for environmentally friendly formulation concepts.

Sasol Chemicals SASOLAB C12L is a high quality linear alkylbenzene (LAB) produced by Sasol Chemicals at its various manufacturing plants. It is distributed from storage locations around the world. SASOLAB C12L is a clear, odorless, oily liquid. It has an average molecular weight around 240. For documents specific to a region, please contact Sasol using the 'Request Document' button.

A clear liquid polymer soluble in water, LIPOXOL 300 MED is produced by the addition of ethylene oxide to ethylene glycol. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIPOXOL 6000 MED powder is a Medical Grade Polyethylene Glycol belonging to Sasol's PEG range of products For documents specific to a region, please contact Sasol using the 'Request Document' button.

BHT is a hindered phenolic antioxidant/preservative that is used widely in Plastics, Elastomers, Lubricants, Oils and Food applications. BHT can be stored, transferred, processed and disposed of safely when proper procedures and safeguards are employed in industrial use. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLOX MO 154 is based on a C12-14 fatty alcohol. It can basically be mixed with anionic, nonionic, and cationic surfactants.

Acetone of 99.90 % mass purity. Used as a chemical intermediate in Methyl Methacrylate (MMA), Bis-Phenol A (BPA), MIBK, DAA, and MIBC production. Used as a solvent in paints, inks, nail polish removers, acetylene cylinders, adhesives. Also used as a solvent in the manufacture of pharmaceuticals, vitamins and cosmetics. For documents specific to a region, please contact Sasol using the 'Request Document' button.

ISOFOL 16 is a primary, saturated alcohol with defined branching of the carbon chain. Such alcohols are chemically described as 2-alkyl-1-alkanols and are also referred to as Guerbet alcohols. It is a high purity alcohol that offers excellent oxidative and color stability. Additionally, the twin, 100% linear alkyl branches of the ISOFOL alcohol give it a lower viscosity and better biodegradability than dimer alcohols derived from oxo-alcohols. The unique chemical structure of ISOFOL alcohol also provides good solubility and solvency.

PARAFOL single cut paraffin are an excellent choice when looking for a phase change material for latent heat storage applications including functional textiles and construction. PARAFOL single cut paraffin are an alternative choice when looking for non-polar solvents, oils or wax additives based on renewable resources for environmentally friendly formulation concepts.

MARLIPAL O13/90 is based on a primary, multibranched C13 alcohol with approx. 9 moles ethylene oxide. It is used in personal care as water-soluble emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

DISPAL 28AC2 is a modified boehmite alumina designed specifically for coatings and polymer applications. The key property enhancements in coatings formulations are corrosion inhibition and adhesion promotion. DISPAL 28AC2 is amenable to water and solvent-based paint applications and can be mixed directly into your formulation providing enhanced performance with ease.

ALFOL 1618 Alcohol is a high purity, petrochemical-based mixture of cetyl Alcohol and stearyl Alcohol. ALFOL 1618 Alcohol is white in appearance with a sweet pungent odor. ALFOL 1618 Alcohol is classified as readily biodegradable in standard ready biodegradability tests. ALFOL 1618 Alcohol are physically and chemically equivalent to corresponding oleochemical-based Alcohols derived from such sources as coconut oil or palm oil. It can be used as is in personal care formulations or as feedstock for various chemical reactions. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Acetone of min. 99.90 % mass purity.

Depending of the molecular weight the Lipoxol 400 MED is liquid polymers soluble in water. It is produced by the addition of ethylene oxide to ethylene glycol. For documents specific to a region, please contact Sasol using the 'Request Document' button.

NACOL Ether 6 is a high purity, biodegradable dialkyl ether derived from analogous linear alcohols. It is a low viscosity oil with good spreading properties. The specific structure of the ether provides polarity, which yields advantageous solubility and solvent characteristics.

SASOLWAX 6530SA is a qualified hydrocarbon wax yielding similar torque fusion response as fully refined 165F melt paraffin with benefit of reduced die drool (beard), faster heat transfer, slightly stiffer melt and higher output.

MARLIPAL O13/109 is based on a primary, multibranched C13 alcohol with approx. 10 moles ethylene oxide. The product contains approx. 10% water to obtain a clear product. It is used in personal care as water-soluble emulsifier. It is applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

PARAFOL 14 RSPO-MB is a high pure paraffin produced from oleochemical resourced under RSPO-MB requirements. It is a clear, colorless liquid. PARAFOL 14 RSPO-MB is a very light and highly spreading emoillient and a readily biodegradable alternative to D5 silicone oils.

LIAL 123 is primary linear and mono-branched alcohols mixture with alkyl chain length of 12 to 13 carbon atoms. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLOX FK 64 is based on a C10-12 fatty alcohol. It can basically be mixed with anionic, nonionic, and cationic surfactants.

MARLIPAL 10/8 is a linear C10 alcohol based ethoxylate with approx. 8 moles ethylene oxide. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Marlipal O 13/100 is a oxoalcohol C 13 + 10 mol of ethylene oxide. It is used in personal care as water-soluble emulsifier. It is applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

LIPOXOL 6000 MED flakes is a Medical Grade Polyethylene Glycol belonging to Sasol's PEG range of products.It is a combination with LIPOXOL 6000 MED Powder under LIPOXOL 6000 MED. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLIPAL O13/40 is based on a primary, multibranched C13 alcohol with approx. 4 moles ethylene oxide. It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLIPAL 24/20 is based on a primary linear C12-C14 fatty alcohol with approx. 2 moles ethylene oxide. The alcohol is obtained from oleo oils, e.g. Palm kernel oil, by transesterification and hydrogenation reaction. MARLIPAL 24/20 is also available as RSPO-MB grade. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLIPAL O13/30 is based on a primary, multibranched C13 alcohol with approx. 3 moles ethylene oxide. It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLIPAL O13/99 is based on a primary, multibranched C13 alcohol with approx. 9 moles ethylene oxide. The product contains 10% water to obtain a clear product. It is used in personal care as water-soluble emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLINAT 242/28 is an Alkyl Ether Sulfate belonging to Sasol's Sulfates range of products For documents specific to a region, please contact Sasol using the 'Request Document' button.

PARAFOL single cut paraffin are an excellent choice when looking for a phase change material for latent heat storage applications including functional textiles and construction. PARAFOL single cut paraffin are an alternative choice when looking for non-polar solvents, oils or wax additives based on renewable resources for environmentally friendly formulation concepts.

MARLIPAL O13/80 is based on a primary, multibranched C13 alcohol with approx. 8 moles ethylene oxide. It is used in personal care as water-soluble emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

Triisopropanolamine (TIPA) with a purity of 99% is an Triisopropyl Amine belonging to Sasol's Alkanol Amines range of products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

EMULDAC AS-25 is widely used as dispersing agent in industrial applications, in particular in polyester dyeing processes and emulsion polymerizations. EMULDAC AS-25 is suitable for detergent applications in automatic dishwashing tablets and toilet rim blocks. EMULDAC AS-25 is also suitable for personal care applications as O/W emulsifier in a broad range of pH and as dispersant for hair-dyeing formulations. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLIPAL O13/50 is based on a primary, multibranched C13 alcohol with approx. 5 moles ethylene oxide. It is used in personal care as emulsifier, applicable for all kinds of liquid personal cleansing products. For documents specific to a region, please contact Sasol using the 'Request Document' button.

MARLOX FK 86 is based on a C10-12 fatty alcohol. It can basically be mixed with anionic, nonionic, and cationic surfactants.