Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Industrial Additives Functions
- CAS No.
- 161074-79-9
- EC No.
- 500-513-4
- Technologies
Applications & Uses
- Applicable Processes
- Recommended Uses & Known Applications
- DACLOR 27-20-23 NE is used as anionic emulsifier in emulsion polymerization to produce stable latexes of styrene/acrylate, VAM (vinyl acetate monomer) and copolymers.
- DACLOR 27-20-23 NE is used alone or in combination with other surfactants like NONIDAC 11P 30-70 or EMULDAC ALCS-100.
Properties
- Physical Form
- Appearance
- Clear liquid
- Typical Properties
Value | Units | Test Method / Conditions | |
Density (25°C) | 1.05 | g/cm³ | ASTM D7042, ASTM D4052 |
Unsulphonated Matter (HPLC) | max. 3 | % mass | EN 13273 |
pH (5% active matter) | 7.0-9.0 | - | RCM 3645 |
Color (5% active matter) | max. 20 | Klett | RCM 3668 |
Surface Tension at CMC | 30 | mN/m | ISO 43100 |
Flash Point | min. 100 | °C | — |
Sodium Sulfate Content | max. 0.4 | % mass | ISO 6844 |
Viscosity at 25°C | 68 | cSt | ASTM D445, ASTM D7042 |
Pour Point | max. 10 | °C | ASTM D 97 |
Dry Residue | 28.0-30.0 | % mass | ASTM C566 |
Critical Micelle Concentration | 1.000 | ppm | ISO 43100 |
Packaging & Availability
- Packaging Type
- Packaging Information
DACLOR 27-20-23 NE is generally supplied in plastic drums
Storage & Handling
- Shelf Life
- 12 months
- Storage and Handling
- DACLOR 27-20-23 NE should be stored preferably in stainless steel or fiber glass tanks.
- DACLOR 27-20-23 NE must be stored at temperature below 40°C. Temperature above 45°C should be avoided, even briefly, because hydrolysis may occur with formation of sulphuric acid. Storage tanks must be heated with water warmed at a temperature below 50°C. The use of steam to warm up the product is absolutely prohibited. In addiction contact with acids could cause hydrolysis as well.
- DACLOR 27-20-23 NE is a clear liquid at room temperature and it has pour point lower than 10°C.
- DACLOR 27-20-23 NE is susceptible to microbial contamination and decomposition by microorganisms.
- DACLOR 27-20-23 NE is supplied containing a small amount of preservative sufficient for transport and short term storage. If the product is stored for several weeks or months it is recommended to carry out regular check of microbial content. Furthermore careful precautions like clean sampling vessel, sterilized water for dilution, limit prolonged or too often repeated exposure to open air, etc. are necessary to maintain microbiological purity of the product. Shelf-life is 12 months from production date for product in its original and sealed packaging.