LIPOXOL 300 is a polyethylene glycol with an average molecular weight of 300 g/mol. LIPOXOL 300 is a clear liquid at room temperature and has the following structural formula: HO-(CH₂CH₂O)₆H. This product can be used in a wide array of household and industrial applications.

Chemical Family: Alcohols, Polyethylene Glycols, Polyglycols

Functions: Base Stock & Oil, Binder, Humectant, Intermediate, Lubricant, Plasticizer, Solvent

End Uses: Ceramics, Lacquers, Metalworking Fluids, Paper & Pulp, Polyester, Polyurethane, Textiles

Safety Data Sheet
  • TypeDocument Name
View All Documents

Knowde Enhanced TDS

Identification & Functionality

Chemical Name
Base Chemicals Functions
Fluids & Lubricants Functions
Industrial Additives Functions
Molecular formula
HO-(CH₂CH₂O)₆H

Applications & Uses

Base Chemicals End Uses
Coating Type
Fluids & Lubricants End Use
Industrial Additives End Use

Properties

Physical Form
Soluble in
Water (2 wt. %)
Typical Properties
ValueUnitsTest Method / Conditions
Average Molecular Weight285 - 315g/mol
Average Ethylene Oxide Content6.0Moles
Hydroxyl Number356 - 394mg KOH/g
Free Ethylene Oxide Contentmax. 1ppm
Water Contentmax. 0.5wt. %
Density (at 40°C)1.11g/mL
Flash Point220.0°C
Solidification Range-20 to -10°C
Dynamic Viscosity (at 40°C)36.0mPas
pH (10% in water)4.5 - 7.5
Viscosity (at 40°C)32.0cSt
Acid Numbermax. 0.2
Colormax. 20APHA
Pour Point-13.0°C

Regulatory & Compliance

Storage & Handling

Storage And Handling

Precautions for safe handling 

Advice on safe handling

  • No special technical protective measures required

Advice on protection against fire and explosion

  • Normal measures for preventive fire protection.

Fire-fighting class

  • B: Fires involving liquids or liquid containing substances. Also includes substances which become liquid at elevated temperatures.

Conditions for safe storage, including any incompatibilities

Storage class (TRGS 510)

  • 10-13: German Storage Class 10 to 13

Other data

  • Keep in a dry place.

Container Material

  • Suitable Materials: Steel

Storage Information

  • Small quantities should be stored in sealed bottles, totes and drums at a temperature of 25°C (77°F) or less.
  • Liquid bulk quantities should be padded with a dry inert gas, such as nitrogen, to prevent air from entering the tank or container. The product should not be exposed to temperatures in excess of 60°C (140°F) for long periods of time to avoid product degradation.
  • Based on our experience, LIPOXOL 300 shows no physical and/or chemical changes for at least 24 months after the manufacturing date when stored under conditions that minimize exposure to air, moisture and extreme temperatures.
  • It is recommended to test the ethoxylate for key specifications every 24 months after the manufacturing date.