Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Chemical Name
- Base Chemicals Functions
- CASE Ingredients Functions
- Industrial Additives Functions
- CAS No.
- 25322-68-3
- EC No.
- 500-038-2
- Technologies
Features & Benefits
- Labeling Claims
- Base Chemicals Features
- CASE Ingredients Features
- Fluids & Lubricants Features
Applications & Uses
- Applications
- Applicable Processes
- Fluids & Lubricants Type
- Base Chemicals End Uses
- Coating Type
- Fluids & Lubricants End Use
- Industrial Additives End Use
Properties
- Odor
- Mild
- Typical Properties
Value | Units | Test Method / Conditions | |
Color Number (APHA) (25 % in water) | max. 15 | mg Pt/l | DIN EN 1557 |
Molecular Weight (Average) | 2700-3300 | g/mol | — |
pH (10 % in water) | 4.5-7.5 | - | USP/NF |
Bulk Density (tel quel) | approx. 0.52 | g/cm3 | DIN 53466-A |
Density at 20°C (50 % in water) | approx. 1.088 | g/cm3 | — |
Viscosity (20°C, 50 % in water) | 70-110 | mPas | DIN 53105 |
Solubility in Water at 20°C | approx. 550 | g/l | — |
Surface Tension (20°C, 50 % in water) | 54-57 | N/m 10^-3 | — |
Setting Temperature | 50-56 | °C | — |
Water Content | max. 0.5 | % | — |
Ignition Temperature | approx. 420 | °C | — |
Flash Point | approx. 250 | °C | — |
Acid Number | max. 0.2 | mg KOH/g | EN ISO 2114 |
Ash Content | approx. 0.05 | % mass | DIN 51575 |
Hydroxyl Number | 34-42 | mg KOH/g | DIN EN 13926 |
Regulatory & Compliance
Technical Details & Test Data
- Statements and Confirmations
California Prop. 65 list
LIPOXOL MED grades contains the following chemicals found on the California Proposition 65 list of chemicals published by the Governor of California:
- 1,4-Dioxane (max. 1 mg/kg)
- Ethylene oxide (max. 1 mg/kg)
- Formaldehyde (max. 30 mg/kg)
- Ethylene glycol (max. 620 mg/kg)
Cosmetic
Assuming the use of the raw materials and manufacturing process currently employed the LIPOXOL MED grades fulfills the requirements regarding the annexes of the regulation No. (EC) 1223/2009 with the exception of very small amounts of free Ethylene oxide (≤ 1 ppm), Formaldehyde (≤ 30 ppm) and 1,4-Dioxane (≤ 1 ppm) which are characteristic for this type of product.
With regard to the Diethylene glycol content which is limited to max. 0.1% for the ready to use cosmetic product (Annex III) please consider the Diethylene glycol content of the relevant LIPOXOL MED type
CMR
We hereby confirm that, to the best of our present knowledge, assuming the use of the raw materials and manufacturing process currently employed, LIPOXOL MED does not contain any CMR-substances classified as CMR category 1A, 1B an 2 in accordance with regulation No. (EC) 1272/2008 and its adaptations, with the exception of very small amounts of free Ethylene oxide (≤ 1 ppm), Formaldehyde (≤ 30 ppm) and 1,4-Dioxane (≤ 1 ppm) which are characteristic for this type of product.
Halal
- LIPOXOL MED grades are not produced under muslimic supervision
- Intermediates, starting material and LIPOXOL MED grades are of non-animal origin
- LIPOXOL MED grades are made by a process in which only auxiliaries of non-animal origin have been used
- Processing equipment is only used for products of non-animal origin
- We permit in case of request a muslimic inspection of the production plant
LIPOXOL MED grades are free of Lactose, Latex, Gluten, Yeast, Maize, Wheat, Pork, Starch, Dyes and Nuts
Microbiological purity
- The parameter given in chapter 5.1.4 (Microbiological quality of non-sterile pharmaceutical preparations and substances for pharmaceutical use) are regularly checked.
- The determination of TAMC (total aerobic microbial count) and TYMC (total yeasts and molds count) is done according to Ph. Eur. 2.6.12. (Microbiological examination of non-sterile products: microbial enumeration tests) and the limits of
- TAMC ≤ 1000 cfu/g
- TYMC ≤ 100 cfu/g can be confirmed.
Retest date
- LIPOXOL MED grades with an average molecular weight of < 1000 g/mol: 2 years starting with the date of production
- LIPOXOL MED grades with an average molecular weight of ≥ 1000 g/mol: 3 years starting with the date of production
SVHC substances
Assuming the use of the raw materials and manufacturing process currently employed the LIPOXOL MED grades do not contain any substances from the SVHC list (candidate list).
WADA list
Assuming the use of the raw materials and manufacturing process currently employed the LIPOXOL MED grades do not contain any substances from the WADA list (world anti-doping association).
Packaging & Availability
- Packaging Type
- Packaging Information
Road tankers (melt), 25 kg polyethylene sacks on 1 t pallets.
Storage & Handling
- Storage And Handling
Precautions for safe handling
Advice on safe handling
- When processing the product, the formation and enrichment of dusts must be avoided.
- Dust can form an explosive mixture in air.
- Lipoxol grades are hygroscopic.Therefore, they should be stored in well-closed packages in a dry place.
Advice on protection against fire and explosion
- Normal measures for preventive fire protection.
Fire-fighting class
- B: Fires involving liquids or liquid containing substances. Also includes substances which become liquid at elevated temperatures.
Conditions for safe storage, including any incompatibilities
Requirements for storage areas and containers
- Keep tightly closed. Keep in a dry place.
Storage class (TRGS 510)
- 10-13: German Storage Class 10 to 13
Other data
- Stable under normal conditions.
Container Material
- Suitable Materials: Steel